POTTER PSN-106B
POTTER PSN-106B 10 AMP 6 NAC Power Supply User Manual
Model: PSN-106B
1. Introducere
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the POTTER PSN-106B 10 AMP 6 NAC Power Supply. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.

Figure 1: POTTER PSN-106B 10 AMP 6 NAC Power Supply. This image shows the front view of the power supply, highlighting its black casing and the layout of its connection terminals and status indicators.
2. Informații de siguranță
AVERTIZARE: Installation and servicing must be performed by qualified personnel only. Disconnect all power sources before servicing to prevent electric shock or equipment damage.
- Respectați întotdeauna codurile electrice locale și naționale.
- Asigurați-vă împământarea corespunzătoare a unității.
- Nu expuneți unitatea la umiditate sau temperaturi extreme.
- Verificați volumul de intraretage and current ratings before connecting to a power source.
3. Produs terminatview
The POTTER PSN-106B is a 10 AMP, 6 NAC (Notification Appliance Circuit) power supply designed for fire alarm and security applications. It provides regulated and filtered power to connected devices.
Caracteristici cheie:
- 10 Amp total output current.
- Six independently supervised Notification Appliance Circuits (NACs).
- Built-in battery charger for standby power.
- Fault monitoring and reporting capabilities.
4. Configurare și instalare
4.1 Montarea unității
- Select a suitable location that is clean, dry, and free from excessive vibration or heat.
- Mount the power supply securely to a wall or other stable surface using appropriate fasteners. Ensure adequate ventilation around the unit.
4.2 Conexiuni de cablare
Refer to the wiring diagram provided inside the unit's enclosure for specific connection points. All wiring must comply with NFPA 70 (National Electrical Code) and NFPA 72 (National Fire Alarm and Signaling Code).
- Intrare alimentare CA: Connect the main AC power source to the designated terminals. Ensure the power source matches the unit's voltage cerințe.
- Conexiuni baterie: Connect standby batteries to the battery terminals, observing correct polarity. Batteries are essential for maintaining power during AC failures.
- NAC Outputs: Connect notification appliances (horns, strobes, etc.) to the NAC terminals. Each NAC is supervised for open and short circuits.
- Ieșiri auxiliare: Connect auxiliary devices requiring regulated power to the auxiliary power terminals.
- Trouble/Supervisory Relays: Connect these outputs to the main fire alarm control panel (FACP) for remote fault reporting.
5. Instrucțiuni de utilizare
5.1 Pornirea inițială
- After all wiring is complete and verified, apply AC power to the unit.
- Observe the status indicators. The AC POWER LED should illuminate steadily.
- If batteries are connected, the BATTERY CHARGE LED should indicate charging status.
5.2 Indicatori de stare
| Indicator | Stare | Descriere |
|---|---|---|
| PUTERE AC | Verde (concentrat) | AC power is present and within normal operating range. |
| BATERIE | Verde (concentrat) | Batteries are connected and fully charged. |
| BATERIE | Galben (Intermitent) | Bateriile se încarcă. |
| PROBLEME | Galben (în mod constant) | A fault condition exists (e.g., AC failure, battery fault, ground fault, NAC fault). |
| NAC 1-6 | Verde (concentrat) | NAC is active and supplying power. |
| NAC 1-6 | Galben (în mod constant) | NAC fault detected (open or short circuit). |
6. Întreținere
Regular maintenance ensures the reliable operation of your PSN-106B power supply. All maintenance should be performed by qualified personnel.
- Lunar: Inspect the unit for any visible damage. Verify all status indicators are normal.
- Anual: Testați volumul baterieitage and capacity. Replace batteries as recommended by the manufacturer (typically every 3-5 years). Clean any dust accumulation from the enclosure and ventilation openings.
- Păstrarea evidenței: Maintain a log of all inspections, tests, and maintenance performed.
7. Depanare
If the unit exhibits abnormal behavior, refer to the following table before contacting technical support.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| AC POWER LED Off | Fără alimentare de curent alternativ. | Check circuit breaker, power cord, and AC input terminals. |
| TROUBLE LED On | General fault condition. | Check other status LEDs for specific fault (e.g., battery, ground, NAC). |
| BATTERY LED Yellow (Steady) | Battery fault or low battery. | Verificați conexiunile bateriei, vol.tage, and age. Replace if necessary. |
| NAC LED Yellow (Steady) | NAC open or short circuit. | Inspect wiring on the affected NAC for breaks or shorts. Verify end-of-line resistor. |
8. Specificații
| Parametru | Valoare |
|---|---|
| Model | PSN-106B |
| Marca | OLAR |
| Curent de ieșire | 10 Amps (Total) |
| NAC-uri | 6 |
| Wattage | 100 wați |
| UPC | 742779300829 |
| ASIN | B09LFLLWWD |
| Data primului disponibil | 9 noiembrie 2021 |
9. Garanție și suport tehnic
For warranty information, please refer to the documentation included with your purchase or visit the official POTTER website. For technical assistance, contact POTTER customer support. Ensure you have your model number (PSN-106B) and purchase details available when contacting support.
Producător: OLAR
Web: www.pottersignal.com (Examplinkul, linkul real poate varia)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.