LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Model: 65636 | Marcă: LEDVANCE
Informații importante privind siguranța
- Numai pentru utilizare în interior: Acest produs este conceput pentru utilizare în interior, în locuri uscate. Nu expuneți la apă sau umiditate ridicată.
- Siguranta electrica: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
- Instructiuni de taiere: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Instalare: Deconectați întotdeauna alimentarea înainte de instalare sau întreținere.
- Căldură: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Copii: Nu lăsați produsul și componentele sale la îndemâna copiilor.
Conținutul pachetului
Verificați dacă toate componentele sunt prezente în pachet:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Sursa de alimentare
- (1) IR Remote Controller (with battery included)
- (20) Cleme de montare
Image: Main product image showing the light strips, remote, power adapter, and clips.
Configurare și instalare
- Pregătiți suprafața: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Conectați componentele: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Funcționalitate de testare: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Activare telecomandă: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Operațiunea
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Funcții de control de la distanță:
- ON/OFF: Power the light strips on or off.
- Alegerea culorii: Alegeți dintre 16 de culori statice folosind butoanele de culoare.
- intensității luminoase: Adjust the brightness of the selected color or dynamic mode.
- Moduri dinamice: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Întreţinere
- curatenie: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Durată de viaţă: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Înlocuirea bateriei la distanță: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Luminile nu se aprind. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| Telecomanda nu răspunde. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | 65636 |
| Marca | LEDVANCE (Sylvania) |
| Culoare | RGB (16 colors) + White |
| Lungime | 32ft (2 x 16.4ft strips) |
| Utilizare | Doar în interior |
| Caracteristici speciale | Color Changing, Dimmable, Energy Efficient |
| Tip sursă de lumină | LED |
| Sursa de alimentare | Electric cu fir |
| Tip controler | Telecomanda IR |
| Voltage | 12 volți |
| Wattage | 24 wați |
| Conectivitate | Infraroşu |
| Material | Plastic |
| Greutatea articolului | 10.88 uncii |
| Durată de viaţă | Până la 30,000 ore |
| Rezistenta la apa | Nu este rezistent la apă |
| UPC | 046135656361 |
Garanție și suport
This Sylvania LED Flexible Light Strip Starter Kit is backed by a Garanție de 1 an de la producător.
For technical support, warranty claims, or additional product information, please visit the official LEDVANCE website-ul sau contactați departamentul de servicii pentru clienți.
De asemenea, puteți vizita Magazinul LEDVANCE pe Amazon pentru mai multe produse și informații.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.