AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Produs terminatview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Caracteristici cheie:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Specificații

3. Ghid de instalare

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Despachetarea

1. Scoateți cu grijă carcasa PC-ului din ambalaj.
2. Remove any protective films or internal packaging materials.
3. Așezați carcasa pe o suprafață stabilă și plană.

3.2 Instalarea plăcii de bază

1. Scoateți panoul lateral din sticlă securizată deșurubând șuruburile cu cap striat.
2. Instalați ecranul I/O (dacă nu este preinstalat pe placa de bază) în deschiderea din spate a carcasei.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Fixați placa de bază folosind șuruburile furnizate.

3.3 Instalarea sursei de alimentare

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Fixați sursa de alimentare cu șuruburi din spatele carcasei.

3.4 Instalarea unității de stocare

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Scoateți capacele sloturilor de expansiune necesare din spatele carcasei.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Sistem de răcire

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Managementul cablurilor

Folosește decupajele pentru rutarea cablurilor și punctele de fixare din spatele tăvii plăcii de bază pentru a organiza cablurile. Acest lucru îmbunătățește circulația aerului și aspectul estetic.

4. Instrucțiuni de utilizare

4.1 Pornire/Oprire

• To power on your PC, press the Putere butonul situat pe panoul superior.
• To power off, either shut down through your operating system or press and hold the Putere butonul pentru câteva secunde.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Port USB 3.0 (x1): Pentru transfer de date de mare viteză.
• Porturi USB 2.0 (x2): Pentru conectarea perifericelor.
• Mufă microfon: Pentru intrare audio.
• HD Audio Jack: For audio output (headphones/speakers).
• Buton de resetare: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Întreținere

Întreținerea regulată ajută la asigurarea performanței optime și a longevității componentelor PC-ului.

5.1 Curățarea filtrului de praf

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Curățare generală

• Ștergeți exteriorul carcasei cu o lavetă moale șiamp pânză. Evitați curățarea abrazivă.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Depanare

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Fără putere: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Ventilatoarele nu se învârt/RGB nu funcționează: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Supraîncălzire: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Porturile de pe panoul frontal nu funcționează: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Garanție și asistență

7.1 Informații despre garanție

The AeroCool HEXFORMBKV2 PC case comes with a 2 an garanție for parts. Please retain your proof of purchase for warranty claims.

7.2 Suport tehnic

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's website-ul sau în ambalajul produsului.

• AeroCool Oficial Website: www.aerocool.io
• E-mail de asistență pentru clienți: support@aerocool.io (Example, please verify on official website)