1. Introducere
This manual provides detailed instructions for the installation, operation, and maintenance of your Hertz SPL Show Series Bundle, which includes one pair of ST 25A NEO Compression Tweeters and one pair of SV 165 NEO 6.5" Midrange Drivers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to maximize the performance and longevity of your audio components.
2. Informații de siguranță
Respectați întotdeauna următoarele măsuri de siguranță:
- Instalare profesională recomandată: Din cauza complexității sistemelor audio auto, instalarea este recomandată insistent. Instalarea incorectă poate duce la deteriorarea produsului, a vehiculului sau la vătămări corporale.
- Deconectare de la curent: Before any installation or wiring, disconnect the vehicle's battery to prevent electrical shorts and damage.
- Cablaj: Ensure all wiring is correctly routed and secured to prevent pinching, chafing, or short circuits. Use appropriate gauge wire for power and speaker connections.
- Ventilare: Ensure adequate ventilation around the speakers to prevent overheating, especially during prolonged high-power operation.
- Niveluri de volum: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Operate your audio system responsibly.
- Conditii de mediu: While these components feature waterproofing and anti-UV treatment, avoid direct exposure to extreme elements where possible to extend product life.
3. Conținutul pachetului
Verificați dacă toate articolele enumerate mai jos sunt prezente în colet:
- One Pair (2x) Hertz SPL Show Series ST 25A NEO 1" High Efficiency Compression Tweeters
- One Pair (2x) Hertz SPL Show Series SV 165 NEO 6.5" 4-Ohm SPL Midrange Speaker Drivers
- Installation Accessories (e.g., mounting hardware, wiring terminals - specific items may vary)
- Manual de utilizare (acest document)

Image 3.1: Contents of the Hertz SPL Show Series Bundle, including two midrange drivers, two compression tweeters, a pry tool kit, and a coozy.
4. Produs terminatview
4.1. Hertz SPL Show Series ST 25A NEO Compression Tweeters
The ST 25A NEO tweeters are designed for high-efficiency sound reproduction, featuring a powerful Neodymium magnet and a compact size. They are built for robust performance in demanding audio environments.
- Magnet de neodim: Provides high performance in a compact form factor.
- FEM Optimized: Phase-plug and loading horn are optimized using Finite Element Method for acoustic precision.
- CCAR Voice Coil: Copper Clad Aluminium Ribbon voice coil offers high thermal and mechanical capability, with an easy replacement body kit.
- Aluminium Membrane: Extra-light design to maximize Sound Pressure Level (SPL).
- Durabilitate: Features body waterproofing and anti-UV treatment for outdoor use without discoloration.

Image 4.1: A pair of Hertz SPL Show Series ST 25A NEO Compression Tweeters. These compact, black tweeters feature a horn-loaded design for high-frequency output.

Imaginea 4.2: Un unghi view of a single Hertz SPL Show Series ST 25A NEO Compression Tweeter, highlighting its robust construction and horn design.
4.2. Hertz SPL Show Series SV 165 NEO 6.5" Midrange Drivers
The SV 165 NEO midrange drivers are engineered for powerful mid-frequency reproduction, utilizing Neodymium magnets for excellent performance in a compact and lightweight design. They are also built for durability in various environments.
- Compact și ușor: Achieved through the use of Neodymium N38 H motor units, preserving performance.
- Waterproofing & Anti-UV: Cones are treated to allow safe outdoor use without discoloration.
- Oxidation Prevention: Motor units are treated with cataphoresis, and lead-wires are insulated.
- Compatibilitate: Terminals and mounting holes are designed for installation on Harley-Davidson motorbikes, indicating versatile mounting options.
- Material conului: Water-Repellent Pressed Paper.

Image 4.3: A pair of Hertz SPL Show Series SV 165 NEO 6.5-inch Midrange Drivers. These black speakers feature a central "SPL Show" logo and a durable cone.

Imaginea 4.4: Un unghi view of a single Hertz SPL Show Series SV 165 NEO 6.5-inch Midrange Driver, showing the cone texture and mounting points.
5. Configurare și instalare
Instalarea corectă este crucială pentru performanță și siguranță optime. Se recomandă insistent ca instalarea să fie efectuată de către un profesionist calificat.
5.1. Verificări înainte de instalare
- Compatibilitate vehicul: Ensure the mounting locations in your vehicle can accommodate the dimensions of the SV 165 NEO (6.5") midrange drivers and ST 25A NEO tweeters.
- Cerințe de alimentare: Confirmați-vă amplifier can safely power these components. Refer to the specifications section for power handling.
- Instrumente: Gather all necessary tools, including screwdrivers, wire strippers, crimpers, drill, and safety equipment.
5.2. Montare
Midrange Drivers (SV 165 NEO):
- Scoateți cu grijă difuzoarele existente sau pregătiți locația de montare.
- Ensure the mounting surface is flat and free of obstructions.
- Position the SV 165 NEO driver and mark the screw holes. Drill pilot holes if necessary, ensuring not to damage any vehicle wiring or components behind the panel.
- Secure the driver using the provided mounting screws. Do not overtighten.
Tweeters (ST 25A NEO):
- Choose a mounting location that allows for optimal sound dispersion and imaging, typically at ear level or slightly above.
- These tweeters can be flush-mounted or surface-mounted depending on the included accessories and desired aesthetic.
- Follow the specific instructions provided with the tweeter mounting hardware for precise installation.
5.3. Cablare
Instrucțiuni generale de cablare:
- Always ensure the vehicle's battery is disconnected before making any electrical connections.
- Connect the positive (+) terminal of the speaker to the positive (+) output of the amplifier/crossover, and the negative (-) terminal to the negative (-) output.
- Use high-quality speaker wire of appropriate gauge to minimize power loss and ensure clear signal transmission.
- For the ST 25A NEO tweeters, a high-pass filter is required to protect them from low frequencies. The specifications indicate "Hi-pass filtered @ 5 kHz - 12 dB Oct." This means a crossover should be set to filter out frequencies below 5 kHz with a 12 dB per octave slope. Failure to use a proper high-pass filter will damage the tweeters.
- For the SV 165 NEO midrange drivers, a band-pass filter is typically used, allowing frequencies within their operational range (e.g., 150 Hz to 5 kHz) to pass through.
- Secure all wiring to prevent movement, chafing, and potential short circuits.
Warning: Incorrect wiring can damage the speakers and/or ampConsultați un profesionist dacă nu sunteți sigur.
6. Instrucțiuni de utilizare
Odată instalat, urmați aceste instrucțiuni pentru o funcționare optimă:
- Pornire inițială: After installation, reconnect the vehicle battery. Turn on your audio system at a low volume level.
- System Tuning: Reglați-vă amplifier's gain settings, crossover points, and equalization (EQ) to achieve balanced sound. Pay close attention to the crossover settings for the tweeters (high-pass at 5 kHz, 12 dB/oct) and midrange drivers.
- Perioada de rodare: Allow a break-in period of several hours of normal listening before operating the speakers at high volumes. This allows the speaker components to loosen and perform optimally.
- Controlul volumului: Avoid operating the system at excessively high volumes for extended periods, as this can lead to speaker damage and hearing loss. If you hear distortion, reduce the volume immediately.
7. Întreținere
These Hertz SPL Show Series components are designed for durability and require minimal maintenance:
- curatenie: Use a soft, dry cloth to gently wipe dust or dirt from the speaker cones and grilles. Avoid using harsh chemicals or abrasive cleaners.
- Inspecţie: Periodically check speaker connections for tightness and ensure no wires are frayed or exposed. Inspect mounting hardware for security.
- Protecția mediului: While treated for UV and water resistance, protecting the speakers from prolonged direct sunlight and extreme moisture will extend their lifespan and maintain aesthetic appearance.
8. Depanare
If you experience issues with your Hertz SPL Show Series components, refer to the following common problems and solutions:
8.1. Nu se aude sunet din difuzoare
- Verificați conexiunile: Asigurați-vă că toate firele difuzoarelor sunt conectate în siguranță atât la difuzoare, cât și la amplifier/head unit. Verify correct polarity (+ to + and - to -).
- AmpStatusul lifierului: Verificați dacă ampLifizerul este pornit și nu este în modul de protecție.
- Unitate sursă: Confirm the head unit or source is powered on and playing audio.
- Siguranțe: Check fuses in the amplifier and vehicle's fuse box.
8.2. Sunet distorsionat sau neclar
- Nivel de volum: Reduceți volumul. Distorsiunea apare adesea atunci când ampAmplificatorul sau difuzoarele sunt supraîncărcate.
- Setări de amplificare: Reglați amplifier's gain settings. Too high a gain can cause clipping and distortion.
- Setări crossover: Verify that the crossover frequencies are correctly set for both tweeters and midrange drivers as per specifications. Incorrect crossover settings can lead to distortion or damage.
- Cablaj: Check for loose or shorted speaker wires.
- Deteriorarea difuzorului: Inspect speaker cones and surrounds for any visible damage.
8.3. One Speaker Not Working
- Individual Connections: Check the wiring for the specific non-working speaker.
- Balans/Fader: Ensure the balance and fader settings on your head unit are centered.
- Amplifier Channel: If using a multi-channel amplifier, test the output of the specific channel connected to the non-working speaker.
If problems persist after troubleshooting, contact Hertz customer support or a qualified car audio technician.
9. Specificații
9.1. Hertz SPL Show Series ST 25A NEO Compression Tweeters (Pair)
| Caracteristică | Caietul de sarcini |
|---|---|
| Dimensiune | 44 mm (1.8 țoli) |
| Power Handling - Peak | 100 W (Hi-pass filtered @ 5 kHz - 12 dB Oct.) |
| Impedanta | 4 Ω |
| Raspuns in frecventa | 3 kHz ÷ 20 kHz |
| Sensibilitate | 107 dB SPL |
| Bobina vocală Ø | 25 mm (1 inchi) |
| Material magnet | Neodim |
| Material con | Aluminiu |
| Material bobina vocală | CCAR (Copper Clad Aluminium Ribbon) |
| Caracteristici speciale | FEM optimized phase-plug and loading horn, Body waterproofing and anti-UV treatment |
9.2. Hertz SPL Show Series SV 165 NEO 6.5" Midrange Speaker Drivers (Pair)
| Caracteristică | Caietul de sarcini |
|---|---|
| Dimensiune | 165 mm (6.5 țoli) |
| Impedanta | 4 Ω |
| Material magnet | Neodymium N38 H |
| Material con | Water-Repellent Pressed Paper |
| Caracteristici speciale | Cones waterproofing and anti-UV treatment, Motor units treated with cataphoresis, Insulated lead-wires, Compatible for Harley-Davidson motorbikes installation |
9.3. Specificații generale ale produsului
| Caracteristică | Caietul de sarcini |
|---|---|
| Greutatea articolului | 3 lire sterline |
| Dimensiuni pachet | 19 x 15 x 9 inci |
| Numărul de model | HertzBDL210910-06 |
| ASIN | B09G79LN28 |
| Producător | Hertz |
| Data primului disponibil | 14 septembrie 2021 |
10. Garanție și asistență
Informații despre garanție:
This Hertz SPL Show Series Bundle is covered by a 1 an garanție de producător. This warranty typically covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Asistență clienți:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Hertz customer support directly. Refer to the official Hertz website-ul sau documentația achiziției pentru datele de contact.
Resurse online:
Additional information, FAQs, and product registration may be available on the official Hertz Brand Store sau corporativul lor website-ul.