REBEL RB-0003 3-in-1 Detector User Manual
Model: RB-0003
1. Introducere
Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.
The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.
2. Informații de siguranță
- Always exercise caution when working near detected objects.
- Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
- Păstrați dispozitivul uscat și curat. Nu îl expuneți la umezeală sau temperaturi extreme.
- Nu încercați să deschideți sau să modificați dispozitivul. Reparațiile trebuie efectuate numai de către personal calificat.
- Scoateți bateriile dacă dispozitivul nu va fi folosit pentru o perioadă lungă de timp.
3. Produs terminatview
Familiarize yourself with the components of your REBEL RB-0003 detector:
Figura 1: Față view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.
Figura 2: Spate view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.
- Ecran de afișare: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
- Buton SELECT: Used to switch between detection modes (Metal, Wood, AC Cable).
- Zona senzorului: Located on the back of the device, this area must be flush against the surface for accurate readings.
- Compartiment baterie: Located on the back, for battery installation.
4. Configurare
4.1. Instalarea bateriei
- Open the battery compartment cover on the back of the device (refer to Figure 2).
- Insert the required batteries, ensuring correct polarity (+/-). The device requires batteries for operation.
- Închideți bine capacul compartimentului bateriei.
The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.
5. Instrucțiuni de utilizare
5.1. Funcționare generală
- Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
- Apăsați tasta SELECTA button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
- Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
- Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.
5.2. Metal Detection
In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.
- Select the Metal detection mode.
- Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
- A distinct audio alert or visual indicator will confirm the presence of metal.
5.3. Wood Detection
The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.
- Switch to Wood detection mode.
- Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
- Mark the detected areas for reference.
5.4. AC Cable Detection
The RB-0003 is capable of detecting live AC 90-250V cables.
- Select the AC Cable detection mode.
- Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltage este detectat.
- Atenţie: Always assume wires are live until confirmed otherwise by a qualified electrician.
6. Întreținere
- curatenie: Ștergeți dispozitivul cu o lavetă moale și uscată. Nu utilizați substanțe de curățare abrazive sau solvenți.
- Depozitare: Depozitați detectorul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme. Scoateți bateriile dacă îl depozitați pentru perioade lungi de timp.
- Înlocuire baterie: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.
7. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Dispozitivul nu pornește. | Baterii descărcate sau instalate incorect. | Verificați polaritatea bateriilor sau înlocuiți bateriile. |
| Citiri inexacte. | Low battery, improper contact with surface, or environmental interference. | Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields. |
| No detection in AC mode. | Wires are not live, or too deep. | Ensure power is on to the circuit. Scan slowly and thoroughly. |
8. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | RB-0003 (MIE-RB-0003) |
| Marca | REBEL |
| Metal Detection Depth | Până la 30 mm |
| Wood Detection Depth | Up to 18 mm (for 30x30 mm profiles) |
| AC Cable Detection | 90-250V |
| Dimensiunea afișajului | 51 x 25 mm |
| Indicator baterie descărcată | Da |
| Sursa de alimentare | Alimentat cu baterie |
| Dimensiunile produsului | 15.5 x 5.4 x 2.7 cm |
| Greutatea articolului | 157 grame |
| Evaluarea internațională de protecție | IP66 |
9. Garanție și asistență
REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL website-ul.
For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL website-ul.