COMICA VDLive 10 USB C Wireless Lavalier Microphone System User Manual

1. Introducere

The COMICA VDLive 10 USB C Wireless Lavalier Microphone System is designed for high-quality audio recording with USB-C compatible devices. This versatile system includes a charging case, dual transmitters, and a receiver, offering flexible output modes for various applications such as video recording, live streaming, online conferencing, and vlogging. Its compact design and advanced features ensure clear and stable audio performance.

2. Ce se află în cutie

Vă rugăm să verificați conținutul pachetului pentru a vă asigura că toate articolele sunt prezente:

• 1 x VDLive 10 USB-RX Receiver
• 2 x VDLive 10 TX Transmitters
• 1 x carcasă de încărcare
• 2 x Wind Muffs (Dead Cats)
• 1 x 3.5mm TRS-TRS Audio Cable
• 1 x adaptor USB-C la USB-A
• 1 x Cold Shoe Adapter
• Cablu de încărcare 1 x USB-C
• 1 x Husa de transport
• 1 x Manual de utilizare

3. Produs terminatview

3.1. Receiver (VDLive 10 USB-RX)

• Conector USB-C: Directly plugs into smartphones, tablets, or computers.
• 3.5mm Output/Monitor Jack: For connecting to cameras or monitoring audio with headphones.
• Display IPS: Shows battery levels, audio levels, mode (Mono/Stereo), and connection status.
• Comutator pornit/oprit: Pornește sau oprește receptorul.
• Comutator mono/stereo: Comută între modurile de ieșire mono și stereo.
• Buton de resetare: For system reset if needed.

3.2. Transmitter (VDLive 10 TX)

• Microfon încorporat: Omnidirectional microphone for capturing audio.
• Intrare microfon 3.5 mm: Pentru conectarea unui microfon lavalier extern.
• Volume/Mute Button: Adjusts microphone gain (4 levels) and mutes/unmutes the microphone.
• On/Off/Simplex/Duplex Switch: Powers the transmitter on/off and selects transmission mode.
• Prinzătoare de curea: For easy attachment to clothing.

3.3. Carcasă de încărcare

• Încărcare integrată: Charges both transmitters and the receiver simultaneously.
• Indicator de alimentare: LED lights show the charging case's battery level.
• Buton pereche: Initiates pairing process for devices.
• Port de încărcare USB-C: For recharging the case itself.

4. Configurare și conectare

4.1. Initial Setup & Pairing

1. Fully charge the charging case, transmitters, and receiver before first use.
2. Open the charging case. The devices will automatically power on and attempt to pair.
3. If pairing does not occur automatically, press the "Pair" button on the charging case. The indicators on the devices will flash during pairing and become solid when connected.

4.2. Connecting to a Smartphone/Tablet (USB-C)

1. Asigurați-vă că receptorul este pornit.
2. Directly plug the USB-C connector of the receiver into your smartphone or tablet's USB-C port.
3. The device should automatically recognize the microphone system.
4. Open your preferred video recording or live streaming application.

4.3. Connecting to a Camera (3.5mm Analog)

1. Attach the cold shoe adapter to your camera's hot shoe mount.
2. Slide the receiver onto the cold shoe adapter.
3. Connect the 3.5mm TRS-TRS audio cable from the receiver's 3.5mm output jack to your camera's microphone input.
4. Ensure your camera's audio input settings are configured to use the external microphone.

4.4. Connecting to a Computer (USB-A)

1. Plug the USB-C to USB-A adapter into the receiver's USB-C connector.
2. Plug the adapter into your computer's USB-A port.
3. Select "Comica_VDLive10" as the input and output audio device in your computer's sound settings or conferencing software (e.g., Zoom, Skype).

5. Instrucțiuni de utilizare

5.1. Transmitter Mode Selection (Simplex/Duplex)

• Use the S/D switch on the side of the transmitter to select the desired mode:
  • S (Simplex): One-way audio transmission from the transmitter to the receiver. Ideal for standard recording.
  • D (Duplex): Two-way audio transmission, allowing the user to monitor audio from the receiver (e.g., device audio) through headphones connected to the transmitter's 3.5mm jack.

5.2. Receiver Output Mode (Mono/Stereo)

• On the receiver, use the M/S button to switch between Mono and Stereo output:
  • Mono: Combines audio from both transmitters into a single channel.
  • Stereo: Separates audio from each transmitter into left and right channels, allowing for individual post-production control.

5.3. Volume Adjustment & Mute

• On each transmitter, press the "VOL/MUTE" button to cycle through 4 volume gain levels.
• Press and hold the "VOL/MUTE" button to mute or unmute the specific transmitter. The receiver's display will indicate the mute status.

6. Încărcare

• Dispozitive de încărcare: Place the transmitters and receiver into the charging case. They will automatically begin charging.
• Carcasa de incarcare: Connect the USB-C charging cable to the charging case's USB-C port and a power source. The power indicator LEDs on the case will show the charging status.
• The charging case can provide approximately 3 full charges for both transmitters and the receiver.
• Transmitters and receiver offer up to 4 hours of operation on a full charge. The charging case provides up to 12 hours of additional power.

7. Caracteristici cheie

• Transmisie wireless 2.4G: Stable and reliable audio transmission up to 164 feet (50 meters).
• Reducere inteligentă a zgomotului: Enhances audio clarity by minimizing background noise.
• Display IPS: Provides clear, real-time monitoring of audio levels, battery status, and operating modes.
• Latență scăzută: Sub-20ms latency ensures synchronized audio and video.
• High-Density Wind Muff: Included for effective wind noise reduction in outdoor environments.

8. Specificații

9. Depanare

• Fără ieșire audio:
  • Ensure all devices (transmitters, receiver, recording device) are powered on.
  • Verificați nivelurile bateriei tuturor componentelor.
  • Verify proper cable connections (USB-C or 3.5mm TRS).
  • Confirm the receiver is correctly paired with the transmitters.
  • Check your recording device's audio input settings to ensure the VDLive 10 is selected.
  • Ensure transmitters are not muted.
• Calitate audio slabă/zgomot slab:
  • Ensure transmitters are within the 164ft (50m) operating range.
  • Avoid physical obstructions or strong electromagnetic interference.
  • Use the included wind muffs in windy outdoor conditions.
  • Adjust the volume gain levels on the transmitters to prevent clipping or low signal.
  • Ensure the transmitter is securely clipped and not rubbing against clothing.
• Probleme de asociere:
  • Place transmitters and receiver back into the charging case and press the "Pair" button on the case.
  • Asigurați-vă că toate dispozitivele sunt complet încărcate.
  • If issues persist, try resetting the system using the reset button on the charging case.

10. Garanție și asistență

COMICA products typically come with a manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official COMICA website. You can also contact COMICA customer service directly for assistance.

COMICA Official Store: Visit the COMICA Store on Amazon