LEDVANCE Linear LED Shelf Light 400mm

1. Introducere

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Vă rugăm să citiți cu atenție acest manual înainte de instalare și să îl păstrați pentru referințe ulterioare.

2. Instrucțiuni de siguranță

• Siguranta electrica: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Utilizare prevăzută: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Evaluare IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Sursa de lumina: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Manipulare: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• curatenie: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Accesorii de conectare

4. Specificații

Notă: Specificațiile pot fi modificate fără notificare prealabilă.

5. Configurare și instalare

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Pregătiți zona de instalare: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Deconectați alimentarea: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Marcați punctele de găurire: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Găuri: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. Atașați suporturile de montare: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Conexiune electrică: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Montați dispozitivul: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Restabiliți puterea: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Instrucțiuni de utilizare

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Funcționare automată: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Oprire automată: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Plasarea senzorului: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Întreținere

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• curatenie: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the fixture.
• Inspecţie: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Sursa de lumina: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Depanare

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Lumina nu se aprinde:
  • Check if the power supply is connected and the circuit breaker is on.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Light Stays On Continuously:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Light Flashes or Flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Asigurați-vă că voltage supply is stable and within the specified range (240V).

Dacă acești pași nu rezolvă problema, contactați serviciul de asistență pentru clienți.

9. Garanție și asistență

This LEDVANCE Linear LED Shelf Light comes with a 2 ani garantie de la data achiziției, acoperind defectele de materiale și de fabricație în condiții normale de utilizare.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.