ABB AD1NO-R-15m Modular Device Switch User Manual

1. Introducere

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Figura 1: Față view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Instrucțiuni importante de siguranță

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Instalarea și întreținerea trebuie efectuate numai de către personal calificat.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Asigurați-vă că toate cablurile respectă codurile și reglementările electrice locale și naționale.
• Nu utilizați dispozitivul dacă acesta pare deteriorat.
• This device is designed for indoor use in dry environments.

3. Produs terminatview

The AD1NO-R-15m is an analog time switch with the following key features:

• cadran analogic: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Controls one electrical circuit.
• Rezerva de putere: Maintains timekeeping for a specified duration during power interruptions.
• Design modular: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Configurare și instalare

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Deconectare de la curent: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltage tester.
2. Montare: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Cablaj:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Restaurarea energiei: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Instrucțiuni de utilizare

To set the time and program the switching schedule:

1. Setați ora curentă: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outages.

6. Întreținere

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• curatenie: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Inspecţie: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Conditii de mediu: Asigurați-vă că mediul de operare se încadrează în intervalele de temperatură și umiditate specificate pentru a preveni deteriorarea.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, deoarece acest lucru va anula garanția și vă poate expune la pericole electrice.

7. Depanare

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Specificatii tehnice

• Model: AD1NO-R-15m
• Număr piesa: 2CSM222461R1000
• Producător: Abb.
• Tip: Comutator de timp analogic
• Switching Interval: 15 minute
• Canale: 1 Deschis în mod normal (NU)
• Rezerva de putere: Da
• Greutatea articolului: Aproximativ 2.82 uncii (80 grame)
• Dimensiuni produs: Aproximativ 3.54 x 0.69 x 2.6 inchi (90 x 17.5 x 66 mm)
• Tip de montare: DIN Rail (Wall Mount)
• Componente incluse: Modular device switch
• Bateriile necesare: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Primele disponibile: 21 decembrie 2024

Notă: Specificațiile pot fi modificate fără notificare prealabilă.

9. Garanție și asistență

Informații despre garanție

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB webPăstrați dovada achiziției pentru reclamații în garanție.

Asistență pentru clienți

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official website-ul sau informațiile de contact furnizate pe ambalajul produsului.

Oficial ABB Website: www.abb.com