Lepro PR410082-RGB-JP

Lepro 5m RGB LED Strip Light Instruction Manual

Model: PR410082-RGB-JP

Introducere

Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.

Ce este în cutie

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

  • LED Strip Light (5 meters) x 1
  • DC12V Power Adapter x 1
  • Connection Receiver x 1
  • Telecomandă x 1
  • Instruction Manual (Japanese) x 1
Contents of the Lepro 5m RGB LED Strip Light package
Image: Package contents including the LED strip, power adapter, receiver, and remote control.

Informații de siguranță

  • Acest produs este conceput pentru numai pentru utilizare în interiorNu expuneți la apă sau umiditate ridicată.
  • Asigurați-vă că sursa de alimentare este deconectată înainte de instalare sau întreținere.
  • Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
  • Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
  • A nu se lăsa la îndemâna copiilor.
  • Dacă vreo parte a produsului este deteriorată, întrerupeți imediat utilizarea și contactați serviciul de asistență.

Înființat

Follow these steps for proper installation of your LED strip light:

  1. Pregătiți suprafața: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
  2. Măsurați și tăiați (opțional): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Nota: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
  3. Aplicați banda: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
  4. Conectați componentele: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
  5. Pornire: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Step-by-step installation guide for the LED strip light
Image: Visual guide showing how to stick, cut, connect, and power on the LED strip.
Close-up of the 3M adhesive tape on the LED strip
Image: The strong 3M double-sided adhesive tape for secure mounting.
LED strip showing cut marks for customization
Image: The LED strip can be cut at designated marks to fit your desired length.
Video: A demonstration of the LED strip light in various indoor settings, showcasing its versatility and color-changing capabilities.

Instrucțiuni de operare

The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.

Funcții de control de la distanță:

Diagram of the 44-key remote control for the LED strip light
Image: Layout of the 44-key remote control with labeled functions.
  • Pornire/Oprire: Apăsați tasta buton roșu de alimentare a aprinde sau a stinge luminile.
  • Reglarea luminozității: Utilizați butoanele săgeată sus și jos (labeled 'Brightness Adjust') to increase or decrease the light intensity.
  • Alegerea culorii: Alege din 20 culori prestabilite by pressing the corresponding color buttons.
  • Moduri de bricolaj: The DIY1-DIY6 buttons allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
  • Moduri dinamice:
    • RAPID/LENT: Reglați viteza modurilor dinamice.
    • MAȘINĂ: Comută automat prin toate modurile dinamice.
    • FLASH: Clipește prin culori.
    • JUMP3/JUMP7: Jumps between 3 or 7 colors.
    • FADE3/FADE7: Se estompează între 3 sau 7 culori.
Video: A demonstration of the remote control in action, showing how to change colors and modes for the LED strip light.

Întreţinere

  • curatenie: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Depozitare: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
  • Îngrijirea adezivului: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.

Depanare

ProblemăCauza posibilaSoluţie
Banda LED nu se aprinde.1. Power adapter not plugged in.
2. Remote control insulation sheet not removed.
3. Connections are loose or incorrect.
4. Remote control battery is dead.		1. Ensure power adapter is securely plugged into an outlet.
2. Remove the clear plastic insulation sheet from the remote control battery compartment.
3. Check all connections, ensuring arrows align between the strip and receiver.
4. Replace the remote control battery (CR2025 or equivalent).
Telecomanda nu răspunde.1. Remote not pointed at receiver.
2. Obstruction between remote and receiver.
3. Remote control battery is dead.		1. Point the remote directly at the receiver.
2. Remove any objects blocking the line of sight.
3. Înlocuiți bateria telecomenzii.
Some sections of the strip are not lighting up.1. Damage to the LED strip.
2. Incorrect cutting.		1. Inspect the strip for physical damage. If damaged, contact support.
2. Ensure cuts were made only at designated marks.

Specificații

  • Număr de model: PR410082-RGB-JP
  • Marca: Lepro
  • Tip sursă de lumină: LED (SMD5050)
  • Cantitate LED: 150 LEDs (30 LEDs per meter)
  • Lungimea benzii: 5 metri
  • Consum de energie: 18W
  • Vol. De intraretage: DC12V 1.5A
  • Opțiuni de culoare: RGB (20 preset colors + DIY modes)
  • Metoda de control: 44-key IR Remote Control
  • Utilizare în interior / exterior: De interior
  • Caracteristici speciale: Dimmable, Cuttable, 3M Adhesive, PSE Certified
  • Dimensiune pachet: 13.1 x 10.7 x 6.7 cm; 230 g
Comparison of LED density: Lepro 30 LEDs/M vs. others 12 LEDs/M
Image: Illustrates the higher LED density of Lepro strips (30 LEDs/meter) compared to others (12 LEDs/meter) for brighter illumination.

Garanție și suport

This Lepro LED Strip Light comes with a 2 an garanție. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.

For further assistance, you can visit the official Lepro store on Amazon: Magazin Amazon Lepro

© 2026 Lepro. Toate drepturile rezervate.