Manual de utilizare pentru uscătorul de filamente pentru imprimare 3D îmbunătățit eSUN eBOX Lite

1. Produs terminatview

The eSUN eBOX Lite is an upgraded filament dryer box designed to maintain optimal conditions for 3D printing filaments. It effectively removes moisture, preventing common printing issues such as stringing, clogging, and poor adhesion. This device also functions as a filament storage box and spool holder, providing a comprehensive solution for filament management.

Key features include efficient heating, even temperature distribution, low-noise operation, and broad compatibility with various filament types and spool sizes.

Figure 1: eSUN eBOX Lite Filament Dryer Box with a red filament spool inside.

2. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• eBOX Lite Dryer Box
• Adaptor de alimentare (ștecher SUA)
• User Manual (this document, and a physical copy)
• Filament Outlet Tube/Bayonet

Figure 2: Illustration of the eBOX Lite and its included accessories.

3. Instrucțiuni de configurare

1. Plasare: Place the eBOX Lite on a stable, flat surface away from direct sunlight, heat sources, and excessive humidity. Ensure adequate ventilation around the unit.
2. Conexiune de alimentare: Connect the provided power adapter to the DC input port on the back of the eBOX Lite. Plug the adapter into a standard US power outlet (AC100-240V ~ 50/60Hz).
3. Încărcarea filamentului:
   • Open the transparent lid of the eBOX Lite.
   • Place your filament spool onto the internal rollers. Ensure the spool rotates freely. The maximum compatible spool size is Φ200mm (diameter) x 73mm (height).
   • Thread the filament through the designated outlet hole on the lid. If using the outlet conduit, attach it to the hole and thread the filament through it.
   • Închideți bine capacul.

Figure 3: Visual guide for connecting power and loading filament.

4. Instrucțiuni de utilizare

The eBOX Lite features a simple control panel with a display and buttons for setting temperature and time.

4.1. Panoul de control pesteview

• Afişa: Shows current settings (temperature level, time remaining).
• Butonul de mod: Used to cycle between temperature setting mode and time setting mode.
• Butoane Sus / Jos: Used to adjust values (temperature level, time).

4.2. Setarea temperaturii și a timpului

1. Pornire: After connecting the power, the display will light up.
2. Set Temperature Level:
   • Apăsați tasta Modul button once to enter temperature setting mode. The display will show a number (1, 2, or 3).
   • Utilizați Sus/Jos buttons to select the desired temperature level based on your filament type:
   • Nivelul 1: Approximately 40°C (suitable for PLA/PLA+)
   • Nivelul 2: Approximately 50°C (suitable for ABS/ABS+/PETG)
   • Nivelul 3: Approximately 55°C (suitable for PVA/Nylon/PC)
   • Apăsați tasta Modul button again to confirm the temperature level and proceed to time setting.
3. Set Heating Time:
   • The display will now show the time setting (e.g., "00.0h").
   • Utilizați Sus/Jos buttons to set the desired heating duration from 0 to 18 hours. For optimal drying, eSUN recommends at least 2 hours for most filaments.
   • Apăsați tasta Modul button again to start the drying process. The display will show the remaining time.

The eBOX Lite will maintain the set temperature and humidity throughout the drying cycle. Once the time expires, the heating will stop, but the box will continue to provide a dry storage environment.

Figure 4: Recommended temperature levels and corresponding filament types.

Figure 5: Graph illustrating humidity reduction over time during drying.

5. Întreținere

Regular maintenance ensures the longevity and optimal performance of your eBOX Lite.

• curatenie: Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
• Curatenie interioara: Periodically check the inside of the box for any dust or filament debris. Use a soft brush or compressed air to remove any accumulation.
• Depozitare: Când nu îl utilizați pentru perioade lungi de timp, deconectați dispozitivul și depozitați-l într-un loc răcoros și uscat.

6. Depanare

7. Specificații

Figure 6: Detailed product specifications and package contents.

8. Garanție și asistență

For warranty information and technical support, please refer to the official eSUN website-ul web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției.

You can also find additional resources and a PDF version of the user manual at: eSUN eBOX Lite User Manual (PDF)