Gewiss ICON 11 kW Type 2 EV Charger User Manual

1. Introducere

Thank you for choosing the Gewiss ICON 11 kW Type 2 EV Charger. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your electric vehicle charging station. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Informații de siguranță

Instrucțiuni importante de siguranță:

• Installation must be performed by qualified personnel in accordance with all local and national electrical codes and regulations.
• Do not attempt to open, disassemble, repair, or modify the charger. This may cause damage, electric shock, or fire.
• Ensure the power supply is disconnected before any installation or maintenance procedures.
• Nu lăsați copiii să se apropie de stația de încărcare în timpul funcționării.
• Do not use the charger if it is damaged, wet, or shows signs of malfunction.
• The charger is designed for electric vehicle charging only. Do not use it for other purposes.

3. Produs terminatview

The Gewiss ICON EV Charger is a wall-mounted charging point designed for electric vehicles, offering 11 kW power output with a Type 2 socket. It features AUTOSTART DLM (Dynamic Load Management) for free use and optimized energy consumption, along with Bluetooth connectivity for configuration and session logging.

Caracteristici cheie:

• AUTOSTART DLM: Enables automatic charging upon vehicle connection and dynamic load management to balance power consumption with other household loads.
• Priză tip 2: Compliant with IEC 62196-1 and IEC 62196-2 standards for Mode 3 charging. Designed for single-hand connection and disconnection without a cover, maintaining IP55 protection.
• Construcție robustă: Made from UV-resistant technopolymer, offering IP55 ingress protection and IK10 impact resistance.
• Indicator de stare LED: A light bar indicates the charger's status: Green (available), Blue (charging), Red (out of service).
• Protecție cu curent de scurgere: Includes protection against continuous leakage currents exceeding 6 mA.
• Putere configurabilă: Power output can be configured via an internal selector.

Imaginea 1: Faţă view of the Gewiss ICON 11 kW Type 2 EV Charger. This image displays the sleek design of the wall-mounted unit, highlighting the Type 2 charging socket and the integrated LED status indicator bar.

4. Configurare

The Gewiss ICON EV Charger is designed for wall mounting. Professional installation by a certified electrician is mandatory to ensure safety and compliance with electrical standards.

Installation Steps (Summary - Refer to full installation guide for details):

1. Selectarea site-ului: Choose a suitable wall location, considering proximity to the electrical panel and the vehicle's parking position. Ensure the surface is stable and can support the charger's weight (7 kg).
2. Deconectare de la curent: Ensure the main power supply to the installation area is completely disconnected before proceeding.
3. Montare: Securely mount the charger to the wall using appropriate fasteners. The enclosure features 1/4 turn screw opening and hinges for access.
4. Conexiune electrică: Connect the charger to the electrical supply. This involves wiring the power input and ensuring proper grounding. The charger requires protection against continuous leakage currents of more than 6 mA.
5. Configurare alimentare: Adjust the internal selector to set the desired power output, if necessary, according to your electrical installation capacity.
6. Dynamic Load Management (DLM): If utilizing the DLM feature, ensure proper connection and configuration to monitor household loads and adjust charging power dynamically.
7. Configurare Bluetooth: Use the Bluetooth connection for initial setup, configuration, and to retrieve charging session data.
8. Restaurarea energiei: Once all connections are secure and verified, restore power to the unit.

5. Instrucțiuni de utilizare

The Gewiss ICON EV Charger is designed for user-friendly operation with its AUTOSTART feature.

Charging Your Electric Vehicle:

1. Connect the Vehicle: Plug the Type 2 charging cable from your electric vehicle into the Type 2 socket on the Gewiss ICON charger. The design allows for single-hand connection.
2. Funcția AUTOSTART: The charger will automatically detect the connected vehicle and initiate the charging process. The LED indicator will change to blue, signifying that charging is in progress.
3. Dynamic Load Management (DLM): If configured, the DLM system will continuously monitor your household's total power consumption and adjust the charging power to your EV to prevent exceeding your main electrical supply capacity.
4. Monitorizați starea încărcării: Observe the LED indicator for the charging status:
   • Verde: Charger is available and ready for use.
   • Albastru: Charging is active.
   • Roşu: Charger is out of service or has an error. Refer to the Troubleshooting section.
5. Sfârșitul încărcării: Once your vehicle is fully charged or you wish to stop charging, disconnect the cable from your vehicle first, then from the charger. The LED indicator will return to green.

6. Întreținere

Regular maintenance ensures the longevity and optimal performance of your Gewiss ICON EV Charger.

• curatenie: Clean the exterior of the charger periodically with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure the charger is powered off before cleaning.
• Inspecţie: Regularly inspect the charging cable and the Type 2 socket for any signs of wear, damage, or corrosion. If any damage is found, discontinue use and contact qualified service personnel.
• Conditii de mediu: The charger is designed for outdoor use with IP55 protection. However, avoid prolonged exposure to extreme weather conditions if possible.
• Actualizări firmware: Verifică-l pe cel al producătorului website or app (if applicable) for any available firmware updates to ensure your charger has the latest features and security enhancements.

7. Depanare

If you encounter issues with your Gewiss ICON EV Charger, refer to the following common troubleshooting steps:

For issues not listed here or if problems persist, please contact Gewiss customer support or a certified electrician.

8. Specificații

9. Garanție și asistență

For warranty information, please refer to the documentation provided with your purchase or contact your local Gewiss distributor or customer service. Gewiss is committed to providing high-quality products and support.

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact Gewiss customer support through their official website or your point of purchase. Please have your model number (GWJ3103A) and purchase details ready when contacting support.