Onforu BDB100D-3
Onforu 100W Dusk to Dawn Outdoor LED Flood Light Instruction Manual
Model: BDB100D-3
1. Introducere
This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W Dusk to Dawn Outdoor LED Flood Light. Please read this manual thoroughly before installation and use, and retain it for future reference. This flood light is designed for outdoor use, featuring a photocell sensor for automatic operation and adjustable heads for broad illumination.

Image 1.1: Onforu 100W Dusk to Dawn Outdoor LED Flood Light installed on a house, providing bright illumination.
2. Informații de siguranță
AVERTISMENT: Risc de electrocutare. Deconectați alimentarea la siguranța sau întrerupătorul de circuit înainte de instalare sau service.
- Asigurați-vă că sursa de alimentare este oprită înainte de instalare sau întreținere.
- Instalarea trebuie efectuată de către un electrician calificat, în conformitate cu codurile electrice locale.
- Nu instalați pe suprafețe care nu sunt solide din punct de vedere structural.
- Nu priviți direct în sursa de lumină LED atunci când aceasta este aprinsă.
- Țineți materialele inflamabile departe de corpul de iluminat.
- This product is not intended for use with motion sensors.
- This product is not solar powered.
3. Conținutul pachetului
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- 1 x Onforu 100W Dusk to Dawn Outdoor LED Flood Light
- 1 x suport de montare
- 1 x Garnitură de cauciuc
- 1 x Black Cap for Photocell (for switch-controlled mode)
- Mounting Screws and Wire Nuts
- Manual de instructiuni

Image 3.1: The flood light fixture and included installation hardware.
4. Caracteristicile produsului
- Luminozitate ridicată: 100W LED flood light producing up to 9000 lumens with 154 LEDs.
- Capete reglabile: Trei lamp heads can be adjusted independently to customize lighting angles and provide a wide light range (up to 120° beam angle).
- Senzor Dusk to Dawn: Integrated photocell sensor automatically turns the light on at night (10-20 Lux) and off during the day (30-60 Lux).
- Switch-Controlled Mode: Option to cover the photocell sensor with the included black cap to enable manual control via a wall switch.
- IP65 Impermeabil: Ensures reliable operation in various weather conditions, including rain, sleet, and snow.
- Răcire eficientă: Constructed with high-quality aluminum housing and a fin-type heat sink design for effective heat dissipation, prolonging LED lifespan.
- Economie de energie: Advanced high-efficiency LEDs reduce electricity consumption by over 80%.

Image 4.1: The three adjustable lamp heads and the light perception sensor.

Image 4.2: The light demonstrating its IP65 waterproof capability during rainfall.
5. Configurare și instalare
This product requires hardwired installation. Ensure power is disconnected before proceeding.
- Pregătirea cablajului: Ensure the electrical box is properly installed and the power is off at the circuit breaker.
- Suport de fixare: Attach the mounting bracket to the electrical box using the provided screws. Ensure the rubber gasket is placed between the bracket and the mounting surface for a watertight seal.
- Conexiuni cablare: Connect the light fixture's wires to your household wiring:
- Black wire (Live) to the Live wire.
- White wire (Neutral) to the Neutral wire.
- Green wire (Ground) to the Ground wire.
- Atașați dispozitivul: Align the light fixture with the mounting bracket and secure it with the central screw. Ensure the fixture is flush against the mounting surface.
- Ajustați capete: Loosen the screws on the adjustable heads to position them to your desired lighting angles. Tighten the screws to secure the heads.
- Restabiliți puterea: Porniți alimentarea la întrerupătorul de circuit.

Imaginea 5.1: Schemă de cablare pentru instalare.

Imaginea 5.2: Ghid vizual pentru procesul de instalare.
Video 5.1: Official product video demonstrating the installation process and key features of the Onforu 100W Dusk to Dawn LED Flood Light.
6. Instrucțiuni de utilizare
The Onforu 100W Dusk to Dawn Outdoor LED Flood Light offers two operating modes:
6.1. Dusk to Dawn Mode (Default)
In this mode, the integrated photocell sensor detects ambient light levels. The light will automatically turn on when the ambient light drops to 10-20 Lux (at dusk) and turn off when the ambient light increases to 30-60 Lux (at dawn).

Image 6.1: The light operating in automatic dusk to dawn mode.
6.2. Switch-Controlled Mode
To operate the light manually via a wall switch, cover the photocell sensor with the provided black cap. This will prevent the sensor from detecting ambient light, allowing the light to be controlled solely by the external switch.

Image 6.2: Using the black cap to enable switch-controlled mode.
7. Întreținere
- curatenie: Periodically clean the light fixture and photocell sensor with a soft, damp o lavetă pentru a asigura o performanță optimă. Nu utilizați produse de curățare abrazive sau solvenți.
- Inspecţie: Regularly inspect the wiring and mounting for any signs of damage or loosening.
- Înlocuire LED: LED-urile sunt integrate și nu pot fi înlocuite de utilizator.
8. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde noaptea. | 1. Alimentarea este oprită. 2. Senzorul fotocelulei este obstrucționat sau defect. 3. Problemă de cablare. | 1. Verificați întrerupătorul de circuit și întrerupătorul de perete. 2. Ensure photocell is clean and unobstructed. Remove black cap if installed. 3. Verify wiring connections (consult a qualified electrician). |
| Lumina rămâne aprinsă în timpul zilei. | 1. Photocell sensor is covered or in a dark location. 2. Light from another source is hitting the sensor. 3. Photocell sensor is faulty. | 1. Ensure photocell is exposed to sufficient daylight. Remove black cap if installed. 2. Relocate the light or shield the sensor from other light sources. 3. Contactați asistența pentru clienți. |
| Lumina pâlpâie. | 1. Insufficient light reaching the photocell (borderline lux level). 2. Conexiune electrică slăbită. | 1. Use the included black cap to cover the photocell for switch-controlled mode, or ensure the photocell is in a location with clear light/dark distinction. 2. Check and secure all wiring connections. |
9. Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | Onforu |
| Numărul de model | BDB100D-3 |
| Wattage | 100 wați |
| Luminozitate | 9000 lumeni |
| Temperatura de culoare | 6500 Kelvin (alb la lumina zilei) |
| Sursă de lumină | LED |
| Numărul de surse de lumină | 3 (Adjustable Heads) |
| Evaluare IP | IP65 (impermeabil) |
| Sursa de alimentare | Electric cu fir (110 volți) |
| Metoda de control | Photocell (Dusk to Dawn) or Wall Switch (with cap) |
| Material | Aluminiu |
| Dimensiuni articol (L x l x H) | 11 cm L x 7 cm l x 4 cm Î |
| Tip de montare | Wall Mount / Eave Mount |
10. Garanție și asistență
This product is sold with no stated warranty. For any questions or technical assistance, please refer to the retailer's customer service or the manufacturer's official website pentru opțiuni de asistență.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.