Adalene 218

Adalene 12 Inch Large Atomic Wall Clock Instruction Manual

Model: 218

Introducere

Mulțumesc pentru achizițieasing the Adalene 12 Inch Large Atomic Wall Clock. This clock is designed for precise timekeeping, automatically synchronizing with the atomic time signal from Fort Collins, Colorado. Its vintage black frame, clear analog display, and battery-operated movement make it a versatile addition to any room, indoors or outdoors.

Informații de siguranță

  • Do not expose the clock to extreme temperatures or direct sunlight for prolonged periods.
  • Evitați să scăpați ceasul sau să îl supuneți la impacturi puternice.
  • Nu lăsați bateriile la îndemâna copiilor. Dacă este înghițit, solicitați imediat asistență medicală.
  • Aruncați bateriile uzate în mod responsabil, conform reglementărilor locale.
  • Nu încercați să dezasamblați sau să reparați ceasul singur. Apelați la personal de service calificat.

Conținutul pachetului

Vă rugăm să verificați conținutul pachetului pentru a vă asigura că toate articolele sunt prezente:

  • 1 x Adalene 12 Inch Large Atomic Wall Clock
  • 1 x Manual de instrucțiuni (acest document)

Nota: 1 AA battery is required for operation and is not included in the package.

Produs terminatview

Familiarize yourself with the main components of your Adalene Atomic Wall Clock.

Faţă view of the Adalene 12 Inch Large Atomic Wall Clock

Figura 1: Faţă view of the Adalene 12 Inch Large Atomic Wall Clock, showcasing its white face, black Arabic numerals, and black metal hands within a black vintage plastic frame.

Spate view of the Adalene 12 Inch Large Atomic Wall Clock

Figura 2: Spate view of the Adalene 12 Inch Large Atomic Wall Clock, showing the battery compartment, time zone selector switch, and manual set buttons.

Dimensions of the Adalene 12 Inch Large Atomic Wall Clock

Figura 3: Diagram illustrating the 12-inch width and 12-inch height dimensions of the Adalene Atomic Wall Clock.

Componente cheie:

  • Fata de ceas: White dial with clear black Arabic numerals.
  • Mâinile: Black metal hour, minute, and second hands.
  • Cadru: Vintage black plastic frame.
  • Capac de sticlă: Crystal clear glass protecting the clock face.
  • Compartiment baterie: Located on the back, for 1 AA battery.
  • Time Zone Switch: On the back, to select your local time zone.
  • Manual Set Buttons: On the back, for manual time adjustment if needed.

Înființat

Follow these steps for initial setup of your atomic wall clock:

  1. Instalați bateria: Open the battery compartment cover on the back of the clock. Insert one fresh AA battery, ensuring the correct polarity (+ and -).
  2. Selectați fusul orar: Before the clock attempts to set itself, locate the time zone switch on the back of the clock (refer to Figure 2). Set it to your desired time zone:
    • PST: Ora standard a Pacificului
    • MST: Ora standard de munte
    • CST: Ora standard centrală
    • ESTE: Ora standard de est
  3. Sincronizare inițială: Once the battery is installed and the time zone is set, the clock hands will automatically move to the 12:00 position. The clock will then begin searching for the atomic time signal from Fort Collins, Colorado. This process can take anywhere from a few minutes to several hours, especially if the signal is weak or during daytime. For best reception, place the clock near a window, facing towards Colorado if possible.
  4. Setare automată a orei: Once the signal is received, the clock will automatically set itself to the correct time for your selected time zone, including adjusting for Daylight Saving Time (DST) automatically.
  5. Manual Time Setting (Optional): If the clock does not set itself automatically after 24 hours, or if you are outside the reception range, you can manually set the time using the buttons on the back of the clock. Refer to the "Troubleshooting" section for more details on manual setting.
  6. Montare: The clock features a keyhole slot on the back for easy wall mounting. Ensure you use a sturdy screw or hook capable of supporting the clock's weight.

Funcționează

The Adalene Atomic Wall Clock is designed for minimal user intervention once set up.

  • Reglare automată a orei: The clock continuously monitors the atomic time signal. It will automatically adjust for Daylight Saving Time changes and maintain accurate time without manual intervention.
  • Durata de viață a bateriei: A single AA battery typically powers the clock for approximately one year. Replace the battery annually or when the clock hands stop moving or become erratic.

Întreţinere

Proper care will ensure the longevity and performance of your clock.

  • curatenie: Wipe the clock's surface and glass cover with a soft, dry cloth. Do not use abrasive cleaners or chemical solvents, as they may damage the finish.
  • Înlocuire baterie: When replacing the battery, always use a fresh, high-quality AA alkaline battery. Remove old batteries promptly to prevent leakage.
  • Depozitare: Dacă depozitați ceasul pentru o perioadă lungă de timp, scoateți bateria pentru a preveni deteriorarea cauzată de scurgerile de lichid din baterie.

Depanare

ProblemăCauza posibilaSoluţie
Clock does not set automatically.Weak atomic signal, incorrect time zone setting, low battery.
  • Ensure the time zone switch is correctly set.
  • Așezați ceasul lângă o fereastră, departe de dispozitivele electronice care pot cauza interferențe.
  • Try placing the clock in a different location, especially overnight when signal reception is often stronger.
  • Replace the battery with a fresh AA alkaline battery.
  • If still unsuccessful, proceed to manual time setting.
Clock hands are stuck or not moving.Dead or low battery, hands are obstructed.
  • Replace the battery with a fresh AA alkaline battery.
  • Gently check if the hands are bent or touching each other or the clock face. If so, carefully straighten them.
Clock is displaying the wrong time.Incorrect time zone, failed synchronization, DST issue.
  • Verify the time zone switch setting.
  • Remove the battery for 1 minute, then reinsert it to force a new synchronization attempt.
  • If the clock is off by exactly one hour after a DST change, ensure the DST setting (if available on your model, check the back) is correct or allow it to re-synchronize overnight.

Setare manuală a orei:

If automatic synchronization fails, you can manually set the time:

  1. Ensure a fresh AA battery is installed.
  2. Locate the manual set buttons on the back of the clock (often labeled "SET" or with arrows).
  3. Press and hold the appropriate button to advance the hands until the correct time is displayed. Some models may have separate buttons for hour and minute adjustment.
  4. Once the time is set, the clock will continue to operate as a standard quartz clock. It may still attempt to receive the atomic signal periodically.

Specificații

CaracteristicăDetaliu
MarcaAdalene
Numărul de model218
Tip de afișareAnalogic
Tipul de mișcareAtomic (Radio Controlled)
Sursa de alimentare1 x baterii AA (nu sunt incluse)
Dimensiunile produsului12 inchi (diametru) x 1.5 inci (adâncime)
Greutatea articolului1 Lira
Material cadruPlastic
Culoare cadranAlb
Utilizare în interior/exteriorOutdoor (suitable for covered outdoor areas)
UPC855830006339

Garanție și suport

Adalene products are manufactured with quality and performance in mind. For specific warranty details and support inquiries, please refer to the warranty card included with your purchase or visit the official Adalene website. Vă rugăm să aveți la îndemână numărul modelului (218) și informațiile de achiziție atunci când contactați serviciul de asistență.

Pentru asistență suplimentară, puteți contacta și distribuitorul.

© 2024 Adalene. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.