AXA Blueline LED Rear Light 80mm

1. Introducere

The AXA Blueline LED Rear Light is designed to enhance your visibility and safety when cycling. This robust rear light features two LEDs and is specifically designed for mounting on a bicycle's luggage carrier with an 80mm screw spacing. It complies with German approval standards, ensuring reliable performance. This manual provides essential information for proper installation, operation, and maintenance of your AXA Blueline LED Rear Light.

2. Informații de siguranță

• Always ensure the light is securely mounted and functioning correctly before each ride.
• Regularly check the wiring for any damage or loose connections.
• Keep the light lens clean to maintain maximum visibility.
• This light is intended for use as a rear bicycle light only. Do not modify the product.

3. Conținutul pachetului

Vă rugăm să verificați dacă toate componentele sunt prezente în pachet:

• AXA Blueline LED Rear Light unit
• Mounting hardware (screws, nuts, washers for 80mm spacing)
• Manual de instrucțiuni (acest document)

4. Configurare și instalare

The AXA Blueline LED Rear Light is designed for easy installation on most standard bicycle luggage carriers with an 80mm screw spacing.

4.1. Montarea luminii

1. Identify the two mounting holes on your bicycle's luggage carrier, ensuring they are 80mm apart.
2. Position the AXA Blueline LED Rear Light against the mounting holes.
3. Insert the provided screws through the light's mounting points and the luggage carrier holes.
4. Secure the light using the nuts and washers on the opposite side. Tighten firmly but do not overtighten to avoid damaging the light housing or carrier.

This image displays the AXA Blueline LED Rear Light. The main body is a red reflector with a textured surface, designed to enhance visibility. The upper section features a clear lens, housing the LED components. The overall design is compact and suitable for rear bicycle mounting.

4.2. Conexiune electrica

This light is typically designed for connection to a bicycle dynamo system. Consult your bicycle's manual or a qualified bicycle mechanic if you are unsure about the wiring process.

1. Connect the positive wire from your dynamo system to the designated positive terminal on the rear light.
2. Connect the negative (ground) wire from your dynamo system to the designated negative terminal on the rear light.
3. Ensure all connections are secure and protected from moisture.

5. Instrucțiuni de utilizare

The AXA Blueline LED Rear Light operates automatically when connected to a functioning dynamo system. As you cycle, the dynamo generates power, illuminating the rear light.

• Activare automată: The light will turn on as soon as the bicycle begins to move and the dynamo generates sufficient power.
• Stand Light Function: Many AXA dynamo lights include a 'stand light' feature, which keeps the light illuminated for a few minutes after you stop cycling, providing continued safety at traffic stops or when stationary. This light is equipped with such a function.

6. Întreținere

To ensure optimal performance and longevity of your AXA Blueline LED Rear Light, follow these maintenance guidelines:

• curatenie: Wipe the light's lens and housing with a soft, damp Evitați utilizarea de produse de curățare abrazive sau solvenți care ar putea deteriora plasticul.
• Verificarea conexiunii: Periodically inspect the electrical connections for corrosion or looseness. Ensure they remain securely attached to the dynamo system.
• Securitatea montajului: Regularly check that the light is still firmly mounted to the luggage carrier. Tighten screws if necessary.

7. Depanare

If your AXA Blueline LED Rear Light is not functioning as expected, consider the following:

• Lumina nu luminează:
  • Check the electrical connections to the dynamo for looseness or damage.
  • Ensure your dynamo is functioning correctly (e.g., check the front light if applicable).
  • Inspect the wiring for any cuts or breaks.
• Lumină slabă:
  • Clean the light lens to remove dirt or grime.
  • Verify that the dynamo is generating sufficient power.
• Funcționare intermitentă:
  • Check for loose wiring connections or intermittent contact with the dynamo.
  • Ensure the light is securely mounted and not vibrating excessively.

If problems persist after performing these checks, consult a qualified bicycle mechanic.

8. Specificații

9. Garanție și asistență

AXA products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your purchase or visit the official AXA website. For technical support or further assistance, please contact AXA customer service through their official channels.