Manual de instrucțiuni pentru căștile Bluetooth LEXIN ET-COM pentru motocicletă

1. Introducere

The LEXIN ET-COM is a Bluetooth 5.0 motorcycle helmet communication system designed for riders who wish to stay connected while on the road. This device supports hands-free calling, music streaming, FM radio, voice assistant integration, and a 2-way intercom system with advanced noise cancellation. It is built to withstand various weather conditions, ensuring reliable performance.

2. Conținutul pachetului

The LEXIN ET-COM package includes the following items:

• Main Unit (ET-COM device)
• Hi-Fi Speakers with Boom and Button Microphones
• Suport de montare metalic
• 3M Double-Sided Adhesive Mounting Bracket
• Cablu de încărcare USB de tip C
• Allen Wrench and Screws
• Paduri pentru difuzoare
• Interchangeable Face Plates (6 colors: Grey, Black, Green, Red, Yellow, Blue)
• Manual de utilizare și Ghid de pornire rapidă

Imagine: Detaliată view of all items included in the LEXIN ET-COM package, including the main unit, speakers, microphones, mounting options, charging cable, and interchangeable face plates.

Video: LEXIN Motorcycle Bluetooth ET-COM Unboxing. This video demonstrates the unboxing process and showcases all components included in the product package.

3. Configurare și instalare

Proper installation ensures optimal performance and comfort. Follow these steps to install your ET-COM headset on your helmet.

3.1. Helmet Preparation

It is recommended to remove the inner padding of your helmet before installation to facilitate cable routing and speaker placement. The padding can be reinstalled once the components are secured.

3.2. Montarea unității principale

Choose between the metal clamp bracket or the 3M adhesive bracket based on your helmet type and preference. The metal clamp offers a more secure fit, while the adhesive bracket is suitable for helmets where the clamp nu poate fi folosit.

1. Using the Metal Clamp Paranteză: Loosen the screws on the metal bracket. Slide the bracket between the outer shell and inner padding of your helmet on the left side. Tighten the screws using the provided Allen wrench until the bracket is firmly secured.
2. Using the 3M Adhesive Bracket: Clean the desired mounting area on the left side of your helmet. Peel off the red protective layer from the 3M adhesive. Firmly press the adhesive bracket onto the helmet surface for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before attaching the main unit.
3. Once the bracket is installed, slide the main ET-COM unit onto the bracket until it clicks securely into place.

3.3. Instalarea difuzoarelor și a microfonului

The ET-COM includes two Hi-Fi speakers and two types of microphones (boom and button) for different helmet styles.

1. Amplasarea difuzoarelor: Attach the Velcro pads (if needed) to the inside of your helmet's ear pockets. Peel off the white protective layer from the speaker's Velcro backing and firmly press each speaker into the ear pockets. Ensure they are positioned directly over your ears for optimal audio.
2. Selectarea microfonului:
   • Pentru open-face or modular helmets, utilizați microfon boom. Attach it to the inside of the helmet near your mouth using the adhesive pad.
   • Pentru full-face helmets, utilizați microfon cu buton. This microphone can be discreetly placed inside the helmet's chin bar area.
3. Organizare de cabluri: Route all speaker and microphone cables neatly under the helmet's inner padding to prevent discomfort and ensure they are not exposed. Reinstall the helmet's inner padding.
4. Connect the speaker and microphone cables to the corresponding ports on the main ET-COM unit. Ensure a firm connection to maintain the waterproof seal.

Image: Diagram illustrating the easy installation steps for the LEXIN ET-COM headset on a helmet, showing bracket, speaker, and microphone placement.

Video: LEXIN Motorcycle Bluetooth ET-COM Installation. This video provides a step-by-step guide on how to install the ET-COM headset, speakers, and microphone into a motorcycle helmet.

4. Instrucțiuni de utilizare

4.1. Pornire/Oprire

• Pornire: Press and hold the FM button and the Intercom button simultaneously for a few seconds until a blue light flashes.
• Oprire: Press and hold the FM button and the Intercom button simultaneously for a few seconds until the lights turn off.

4.2. Împerechere Bluetooth (Telefon)

1. Ensure the ET-COM unit is powered off.
2. Press and hold the Phone button until the LED indicator flashes red and blue alternately, indicating pairing mode.
3. On your mobile phone, enable Bluetooth and search for "LEXIN ET-COM" in the list of available devices.
4. Select "LEXIN ET-COM" to connect. The LED indicator on the ET-COM will flash blue slowly once successfully paired.

4.3. Dual Phone Pairing

The ET-COM supports connecting to two mobile phones simultaneously. Follow the same pairing steps (Section 4.2) for the second phone. The device will manage connections to both phones.

4.4. Funcții de apel telefonic

• Răspunde la apel: Press the Phone button once, or wait approximately 7 seconds for automatic answering.
• Terminare apel: Press the Phone button once.
• Respinge apelul: Apăsați și mențineți apăsat butonul Telefon timp de 2 secunde.
• Reapelează ultimul număr: Double-click the Phone button.
• Activate Voice Assistant (Siri/S Voice): Double-click the Phone button to activate your phone's voice assistant.

4.5. Redarea muzicii

• Redare/Pauză: Press the Phone button once.
• Următoarea piesă: Apăsați butonul de creștere a volumului o dată.
• Pista anterioară: Apăsați butonul de reducere a volumului o dată.
• Creșterea volumului: Apăsați și mențineți apăsat butonul de creștere a volumului.
• Volum scăzut: Apăsați și mențineți apăsat butonul de reducere a volumului.

4.6. Radio FM

• Pornirea/Oprirea radioului FM: Press the FM button once.
• Urmatoarea statie: Apăsați butonul de creștere a volumului o dată.
• Stația anterioară: Apăsați butonul de reducere a volumului o dată.

4.7. Intercom Pairing (Device-to-Device)

The ET-COM supports 2-way intercom communication between two LEXIN ET-COM devices.

1. Ensure both ET-COM units are powered on.
2. On both units, press and hold the Intercom button until the LED indicators flash red and blue alternately, indicating pairing mode.
3. On one of the units, press the Intercom button once. The unit will start searching for the other device.
4. Once paired, both units' LED indicators will flash blue slowly, and you will hear a confirmation tone.
5. To start intercom conversation, press the Intercom button once on either unit. To end, press the Intercom button once again.

Image: Illustration showing two riders communicating via LEXIN ET-COM intercom over a distance of up to 1200 meters (0.8 miles).

Video: LEXIN Motorcycle Intercom ET-COM Instruction. This video demonstrates various operational aspects including phone pairing, call handling, music control, and intercom usage.

4.8. Împerechere universală

The LEXIN ET-COM is designed with universal pairing capabilities, allowing it to connect with most Bluetooth headsets from other brands. To pair with a non-LEXIN device, ensure both devices are in pairing mode according to their respective manuals, then initiate pairing from the ET-COM unit as described in Section 4.7.

Image: Visual representation of the LEXIN ET-COM's universal pairing feature, showing connection to another brand's headset.

5. Întreținere

• curatenie: Folosiți un moale, damp cloth to clean the ET-COM unit. Avoid harsh chemicals or abrasive cleaners.
• Încărcare: Charge the device using the provided USB Type-C cable. A full charge takes approximately 1.5 hours.
• Depozitare: Păstrați dispozitivul într-un loc răcoros și uscat atunci când nu este utilizat.
• Rezistenta la apa: The ET-COM is IP67 waterproof, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. Ensure the charging port is securely closed when not charging to maintain water resistance.

Image: The LEXIN ET-COM unit shown in a wet environment, highlighting its IP67 waterproof rating, suitable for use in rain.

Image: Visual representation of the LEXIN ET-COM's 800mAh battery, indicating 300 hours standby time, 15 hours music time, and 1.5 hours charging time.

6. Depanare

7. Specificații

• Versiune Bluetooth: 5.0
• Gama interfon: Up to 1200 meters (0.8 miles) for 2 riders
• Capacitate baterie: 800 mAh Litiu Ion
• Timp de convorbire: Până la 8 ore
• Music Streaming Time: Până la 15 ore
• Timp de așteptare: Până la 300 ore
• Timp de încărcare: Aproximativ 1.5 ore
• Rezistenta la apa: IP67 (impermeabil)
• Anularea zgomotului: DSP & CVC Advanced Noise Cancellation
• Caracteristici speciale: FM Radio, Voice Dial (Siri/S Voice), Universal Pairing, Interchangeable Color Housings
• Greutatea articolului: 0.15 kilograme (5.3 uncii)
• Dimensiuni produs: 3.74 x 1.73 x 0.9 inci

Image: Diagram illustrating the DSP & CVC advanced noise cancellation technology of the LEXIN ET-COM, showing how external noise is copied and canceled.

8. Customization: Interchangeable Face Plates

The LEXIN ET-COM offers interchangeable face plates in 6 different colors (Grey, Black, Green, Red, Yellow, Blue) to match your helmet or personal style. To change the face plate:

1. Locate the small hole on the underside of the main unit.
2. Insert the provided pin into the hole and gently push to release the current face plate.
3. Select your desired color face plate and align it with the main unit.
4. Press firmly until it clicks into place, ensuring it is securely attached.

Image: Display of the LEXIN ET-COM unit with various interchangeable 6-color face plates, allowing customization to match different helmets or preferences.

Image: Step-by-step visual guide on how to open the case using a pin and press to attach a new interchangeable face plate on the LEXIN ET-COM unit.

9. Garanție și asistență

For warranty information, technical support, or further assistance, please refer to the official LEXIN website or contact their customer service directly. Details can be found in the User Manual included in your package.