Rugged Ridge Max Terrain Fender Flares - Instruction Manual

1. Produs terminatview

The Rugged Ridge Max Terrain Fender Flares are designed for the Jeep Wrangler JL (2018-2025 models). These flares combine classic flat-fender styling with a high-clearance design, enhancing your vehicle's off-road capability. Constructed from durable, injection-molded thermoplastic, they offer flexibility and impact resistance. The design provides increased tire clearance for maximum suspension travel. The rear flares are contoured to minimize debris accumulation against painted surfaces. They feature a dual-textured finish that complements factory trim and can be painted for a custom look. Integrated two-color DRL (Daytime Running Light) tubes are included in the front flares, providing both white driving lights and amber turn signals for improved visibility and aesthetic appeal. Installation is simplified with included hardware and requires no drilling.

Caracteristici cheie:

• Designed for 2018-2025 Jeep Wrangler JL models.
• Classic flat fender styling with high-clearance design.
• Durable, impact-resistant injection-molded thermoplastic construction.
• Unique dual-textured finish, paintable for customization.
• Integrated two-color DRLs (white driving light / amber turn signal).

Image 1.1: Rugged Ridge Max Terrain Fender Flares installed on a Jeep Wrangler JL, showcasing the high-clearance design and integrated DRLs.

2. Informații de siguranță

Always exercise caution when working on your vehicle. Ensure the vehicle is parked on a level surface with the parking brake engaged. Disconnect the vehicle's battery before performing any electrical work. Wear appropriate personal protective equipment, including safety glasses and gloves. If you are unsure about any step of the installation process, consult a qualified automotive technician.

3. Conținutul pachetului

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Rugged Ridge customer support.

• Front Fender Flares (Left & Right)
• Rear Fender Flares (Left & Right)
• Kit hardware de montare
• Integrated DRL Tubes and Wiring Harness (for front flares)
• Instrucțiuni de instalare (acest document)

4. Instrumente necesare

Pentru instalare sunt recomandate următoarele instrumente:

• Basic Hand Tools (e.g., Socket Wrench Set, Screwdrivers)
• Wire Strippers/Crimpers (for DRL wiring)
• Bandă electrică sau tub termocontractabil
• Trim Panel Removal Tool (optional, for factory flare removal)

5. Instrucțiuni de instalare

Follow these steps carefully for proper installation. No drilling is required for this installation.

5.1. Pregătire

1. Park your Jeep Wrangler JL on a flat, stable surface.
2. Trageți frâna de parcare.
3. Gather all necessary tools and package contents.
4. Clean the area around the factory fender flares to ensure a clean mounting surface.

5.2. Removing Factory Fender Flares (if applicable)

If your vehicle has existing factory fender flares, carefully remove them by detaching any clips, screws, or fasteners securing them to the vehicle body. A trim panel removal tool may be helpful to prevent damage to painted surfaces.

5.3. Mounting New Fender Flares

1. Position the new Rugged Ridge Max Terrain Fender Flare onto the vehicle body. Ensure proper alignment with the mounting points.
2. Secure the flare using the provided mounting hardware. Start all fasteners by hand to avoid cross-threading, then tighten them evenly. Do not overtighten.
3. Repeat the process for all four fender flares (front and rear).

Imaginea 5.1: Prim-plan view of the Rugged Ridge front fender flare, highlighting the integrated DRL strip.

Image 5.2: Front fender flare installed on a white Jeep Wrangler JL, showing the fit and finish.

Image 5.3: Rear fender flare installed on a white Jeep Wrangler JL, demonstrating the increased tire clearance.

6. DRL Wiring Instructions

The front fender flares include integrated two-color DRL tubes that function as white driving lights and amber turn signals. Proper wiring is essential for their operation.

1. Deconectați bateria: Before any electrical work, disconnect the negative terminal of your vehicle's battery to prevent electrical shorts.
2. Identificați cablajul: Locate the factory turn signal wiring on your Jeep Wrangler JL. You will need to tap into the power for the running lights and the turn signal circuit.
3. Connect DRL Harness: Connect the provided DRL wiring harness to the integrated DRL tubes on each front fender flare.
4. Tap into Vehicle Wiring: Using appropriate wiring connectors (not included, but commonly available), tap the DRL harness wires into the corresponding vehicle wires:
   • Connect the DRL's white wire to the vehicle's running light positive wire.
   • Connect the DRL's amber wire to the vehicle's turn signal positive wire.
   • Connect the DRL's black wire to a suitable vehicle ground point.
5. Conexiuni sigure: Ensure all electrical connections are secure and properly insulated using electrical tape or heat shrink tubing to protect against moisture and corrosion.
6. Cablajul traseului: Carefully route the wiring harness away from moving parts and heat sources, securing it with zip ties as needed.
7. Reconectați bateria: Once all wiring is complete and secured, reconnect the negative terminal of your vehicle's battery.
8. Funcționalitate de testare: Turn on your vehicle's ignition and test the DRLs. Verify that the white lights illuminate with the running lights and that the amber lights flash correctly with the turn signals.

Image 6.1: Components of the DRL light assembly, including the light bar, wiring harness, and mounting bracket.

Imaginea 6.2: Laterală view of the DRL light assembly, showing how it integrates with the fender flare structure.

7. Întreținere

To ensure the longevity and appearance of your Rugged Ridge Max Terrain Fender Flares:

• Curățare regulată: Wash the fender flares regularly with mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Inspecţie: Periodically inspect all mounting hardware for tightness. Re-tighten any loose fasteners to prevent movement or damage.
• DRL Check: Occasionally check the DRLs for proper function (white driving light and amber turn signal). If any issues arise, refer to the troubleshooting section.

8. Depanare

If you encounter issues with your fender flares, consider the following:

• Croială lejeră: If flares feel loose, check all mounting hardware and ensure they are securely tightened. Avoid overtightening, which can strip threads or crack plastic.
• DRLs Not Working:
  • Verificați toate conexiunile cablurilor pentru un contact și o izolație corespunzătoare.
  • Verify that the vehicle's battery is properly connected and charged.
  • Inspect fuses related to the vehicle's running lights and turn signals.
  • Ensure the DRL harness is correctly tapped into the vehicle's electrical system as per Section 6.
• Aspect neuniform: Ensure flares are correctly aligned before final tightening of hardware. Minor adjustments may be possible during installation.

9. Specificații

10. Garanție și asistență

This Rugged Ridge product is backed by a Garanție limitată de 5 ani. For detailed warranty terms, conditions, or to obtain support, please refer to the official Rugged Ridge website-ul lor web sau contactați departamentul de asistență pentru clienți. Păstrați dovada achiziției pentru solicitările de garanție.