BAFANG C965 LCD Display User Manual

1. Introducere

This user manual provides detailed instructions for the installation, operation, and maintenance of your BAFANG C965 LCD Display. This display is designed for use with Bafang Mid Drive motors that utilize the UART communication protocol. Please read this manual thoroughly before using the product to ensure safe and correct operation.

The BAFANG C965 LCD Display offers essential information for your electric bicycle, including speed, battery level, assistance level (PAS), and trip data, enhancing your riding experience.

2. Informații de siguranță

• Always ensure the display is securely mounted and all cables are properly connected before riding.
• Do not attempt to open or modify the display unit. This may void the warranty and cause damage.
• Keep the display screen clean and free from obstructions to ensure clear visibility of information.
• Evitați expunerea ecranului la temperaturi extreme sau la lumina directă a soarelui pentru perioade lungi de timp.
• In case of malfunction, refer to the troubleshooting section or contact Bafang support.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• BAFANG C965 LCD Display Unit
• Handlebar Mounting Bracket
• Control Button Unit
• Manual de utilizare (acest document)

4. Configurare și instalare

Follow these steps to install your BAFANG C965 LCD Display:

1. Montarea afișajului: Attach the handlebar mounting bracket to your bicycle's handlebar. The bracket is compatible with handlebar diameters of 22.2mm, 25.4mm, and 31.8mm. Secure the C965 display unit into the bracket.
2. Cabluri de conectare: Connect the 5-pin female connector from the display unit to the corresponding male connector on your Bafang Mid Drive motor system. Ensure the connection is firm and secure.
3. Mounting Control Buttons: Position the external control button unit on your handlebar within easy reach. Connect its cable to the display unit.

Figure 1: Bafang C965 LCD display unit with cables and mounting bracket.

Figure 2: Bafang C965 LCD display mounted on an e-bike handlebar.

5. Instrucțiuni de utilizare

Once installed, operate your BAFANG C965 LCD Display as follows:

• Pornire/Oprire: Press and hold the power button on the external control unit to turn the display on or off.
• Ajustarea nivelului PAS: Use the '+' and '-' buttons on the control unit to increase or decrease the Pedal Assist System (PAS) level.
• Afișare informații: The display cycles through various information screens. Use the 'M' (Mode) button to switch between different data views such as trip distance, total distance, average speed, max speed, and time.
• Control faruri: If your e-bike system supports it, a dedicated button or a long press of a specific button (refer to your motor's manual) may control the headlights.

Figure 3: Bafang C965 LCD display showing active riding data.

6. Display Functions and Indicators

The C965 display provides various indicators and data points:

• Afișare viteză: Shows current speed, average speed (AVG), and maximum speed (MAX).
• Indicator baterie: Afișează nivelul de încărcare rămas al bateriei.
• Nivel PAS: Indicates the current pedal assist level (0-9 or 0-3, depending on configuration).
• Indicator de kilometraj: Shows trip distance and total odometer reading.
• Indicator de alimentare: Displays real-time motor power output.
• Timp: Current time or trip duration.
• Brake Indicator: Se aprinde când se acționează frânele.
• Indicator de eroare: Displays error codes if a system fault occurs.
• Headlight Power On: Indicates when the e-bike's headlights are active.

Figure 4: Bafang C965 LCD display icons and basic specifications.

7. Întreținere

To ensure the longevity and optimal performance of your C965 display:

• curatenie: Ștergeți ecranul și carcasa cu o lavetă moale șiamp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
• Rezistenta la apa: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. Avoid submerging the unit in water.
• Temperatură: Operate the display within its specified temperature range of -20°C to 60°C.
• Verificarea cablului: Verificați periodic toate cablurile și conectorii pentru a depista semne de uzură sau deteriorare.

8. Depanare

If you encounter issues with your BAFANG C965 LCD Display, consider the following:

• Afișajul nu se pornește:
  • Asigurați-vă că bateria bicicletei electrice este încărcată și conectată corect.
  • Check all cable connections between the display, control unit, and motor for looseness or damage.
  • Verificați dacă butonul de alimentare este apăsat corect.
• Citiri incorecte ale vitezei/distanței:
  • Verificați senzorul de viteză și magnetul de pe roată pentru a asigura o aliniere corectă și curățenie.
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) is correct.
• Coduri de eroare afișate:
  • Refer to your Bafang motor's specific error code list for detailed explanations and solutions. Common issues include motor, controller, or sensor faults.
  • Often, turning the system off and on again can clear temporary errors.
• Butoanele care nu răspund:
  • Check the connection of the external control button unit to the display.
  • Ensure buttons are not physically stuck.

If problems persist after attempting these steps, contact Bafang customer support or your authorized dealer for assistance.

9. Specificații

10. Garanție și asistență

BAFANG products are typically covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For technical support, warranty inquiries, or spare parts, please contact your original retailer or visit the official BAFANG website pentru informații de contact ale serviciului clienți.