1. Produs terminatview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
Figura 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. Instrucțiuni de siguranță
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Siguranța generală
- Purtați întotdeauna echipament de protecție personală (EIP) adecvat, cum ar fi ochelari de protecție și mănuși.
- Ensure the pump is placed on a stable, level surface to prevent tipping.
- Țineți copiii și persoanele neautorizate departe de zona de operare.
- Nu utilizați pompa în atmosfere explozive, cum ar fi în prezența lichidelor, gazelor sau prafului inflamabile.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
Siguranța electrică
- Asigurați-vă că sursa de alimentare voltage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. Conținutul pachetului
Verificați dacă toate articolele enumerate mai jos sunt prezente și nedeteriorate la despachetare:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 x presostat
- 1 x Stainless Steel Hose
- 1 x manometru
- 1 x Three-way Brass Fitting
- Manual de utilizare (acest document)
4. Specificatii tehnice
| Caietul de sarcini | Valoare |
|---|---|
| Numărul de model | TWP47506 |
| Tip | Self-priming Automatic Jet Pump |
| Putere nominală | 750 W (1.0 CP) |
| Voltage | 220-240V |
| Frecvenţă | 50 Hz |
| Cap Max | 45 metri |
| Debit maxim | 60 litri/minut |
| Aspirația maximă | 9 metri |
| Diametrul conductei | 1 x 1 inchi |
| Tip motor | Copper Wire Induction Motor (Brushless) |
| Material rotor | Oţel inoxidabil |
| Pompa CasinMaterialul g | Fontă |
| Lungimea cablului | 0.3 metri |
| Tank Capacity (Cylindrical) | 24 litri |
| Dimensiuni produs (L x l x H) | 30 x 19 x 22 cm |
| Greutatea articolului | 1.5 kg |
| Culoare | Argint |
5. Configurare și instalare
5.1 Plasarea
- Position the pump on a firm, level, and dry surface.
- Asigurați o ventilație adecvată în jurul pompei pentru a preveni supraîncălzirea.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 Conducte de conectare
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- Conducta de aspirație: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- Conducta de refulare: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 Amorsarea pompei
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Ensure the suction pipe is fully submerged in the water source.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casinClătiți cu apă curată până când aceasta dau pe dinafară.
- Puneți la loc și strângeți bine dopul de amorsare.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 Conexiune electrică
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. Funcționare
6.1 Pornirea pompei
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 Operare automată
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 Oprirea pompei
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. Întreținere
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 Verificări regulate
- Verificați cablul de alimentare și ștecherul pentru orice semne de deteriorare.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- Fiți atenți la zgomote neobișnuite în timpul funcționării, care ar putea indica o problemă.
7.2 Curățare
Ștergeți exteriorul pompei cu reclamăamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 Pregătire pentru iarnă (pentru climate reci)
If the pump is exposed to freezing temperatures, it must be drained to prevent damage:
- Deconectați sursa de alimentare.
- Goliți toată apa din pompă casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- Depozitați pompa într-un loc uscat, ferit de îngheț.
8. Depanare
Înainte de a contacta serviciul de asistență pentru clienți, consultați tabelul următor pentru problemele și soluțiile frecvente.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Pompa nu pornește | Fără alimentare Cablu/ștecher defect Motor overload protection tripped |
Verificați conexiunea de alimentare și priza Inspectați și înlocuiți dacă este deteriorat Allow motor to cool, then restart. Check for blockages. |
| Pompa funcționează, dar nu este furnizată apă | Pompa nu este amorsată Scurgere de aer în conducta de aspirație Ridicarea aspirației prea mare Foot valve clogged or stuck Water source empty |
Re-prime the pump (Section 5.3) Check all suction connections for leaks and tighten Relocate pump closer to water source Clean or replace foot valve Ensure adequate water in source |
| Debit sau presiune scăzută | Partial blockage in pipes/impeller Scurgere de aer în conducta de aspirație Rotor purtat Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections Contactați personalul de service calificat Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Pompa se pornește și se oprește frecvent | Leak in discharge system Pressure tank pre-charge incorrect Presostat defect |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. Garanție și asistență
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.