Introducere
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Informații de siguranță
Respectați întotdeauna următoarele măsuri de siguranță în timpul instalării și utilizării:
- Capacitate de greutate: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can result in serious injury or property damage.
- Structura peretelui: Ensure the mounting surface (wall) can safely support the combined weight of the mount and the television.
- Listat UL: This product is UL Listed, indicating it meets specific safety standards.
- Asistență profesională: Dacă nu sunteți sigur de vreo parte a procesului de instalare, consultați un profesionist calificat.
- Copii: Țineți copiii departe de zona de instalare în timpul configurării.
- Instrumente: Use appropriate tools and follow all instructions for their safe operation.
Conținutul pachetului
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Ansamblu placă de perete
- Suporturi TV (2 bucăți)
- Various TV Screws (M4, M6, M8)
- Spacers and Washers
- Lag Bolts and Concrete Anchors (for specific wall types)
- Nivel cu bule
- Cheie
- Șablon de instalare
Specificații
| Numărul de model | 28XTu2564 |
| Marca | MONTARE |
| Compatibilitate dimensiune TV | 26 până la 65 inci |
| Capacitate de greutate | 88 lbs (40 kg) |
| Compatibilitate VESA | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Compatibilitate tip de perete | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Unghi de înclinare | +5° / -13° |
| Unghi pivotant | ±45° (Maximum swivel angle depends on TV size) |
| Reglarea nivelului | ±3° (Post-installation) |
| Distanța de perete | 3" până la 15.7" |
| Material | Oțel aliat |
Configurare și instalare
Verificări înainte de instalare
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Check TV VESA Pattern: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Verificați tipul de perete: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Nu instalați singur pe gips-carton.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Etape de instalare
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Figura 3: Pesteview of the 3-Step Easy Installation Process.
Pasul 1: Atașați suporturile la televizor
- Așezați cu grijă televizorul cu fața în jos pe o suprafață moale și curată pentru a preveni deteriorarea ecranului.
- Align the TV brackets with the mounting holes on the back of your TV.
- Selectați șuruburile, șaibele și distanțierele corespunzătoare din kitul de hardware care se potrivesc cu găurile de montare ale televizorului.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
Pasul 2: Atașați placa de perete pe perete
- Determine the desired height and location for your TV.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate.
- Asigurați-vă că televizorul este fixat în siguranță pe placa de perete.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Instrucțiuni de operare
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewunghiuri de ing.
Reglare Viewunghiul ing
- Înclinare: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewconfort.
- pivotare: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewing from different areas of the room.
- Extensie: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Nivelare: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Întreţinere
Întreținerea regulată ajută la asigurarea longevității și a funcționării în siguranță a suportului de perete pentru televizor.
- curatenie: Ștergeți suportul cu o cârpă moale și uscată pentru a îndepărta praful. Evitați utilizarea de produse de curățare abrazive sau solvenți.
- Verificări periodice: Verificați periodic toate șuruburile și bolțurile pentru a vă asigura că rămân strânse. Strângeți-le din nou dacă este necesar.
- Circulaţie: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Depanare
If you encounter issues during or after installation, consider the following common solutions:
- Televizorul nu este nivelat: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Muntele se simte liber: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Dificultate de ajustare: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Părți lipsă: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Garanție și suport
MOUNTUP TV wall mount series are backed by a 3-year protection plan. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual: