Introducere
This manual provides instructions for the Extreme Networks Summit X460-24p, a high-performance, managed Layer 3 Ethernet switch designed for enterprise and data center environments. It features 24 Gigabit Ethernet ports with Power over Ethernet (PoE) capabilities, along with additional SFP and shared Gigabit SFP ports for flexible connectivity.
Informații de siguranță
Ghid de siguranță
- Always disconnect all power supply inputs before removing any panel for servicing.
- This device contains a Class 1 Laser product. Avoid direct eye exposure to beam.
- Asigurați-vă împământarea corespunzătoare în timpul instalării.
- Refer to the installation manual for power cord selection and additional compliance markings.
Conținutul pachetului
Ce este în cutie
- Extreme Networks Summit X460-24p Switch
- Cablu de alimentare (specific regiunii)
- Kit de montare pe rack
- Documentație (acest manual)
Produs terminatview
The Summit X460-24p switch is designed for efficient network management and high-speed data transfer.
Panoul din spate
This image displays the rear panel of the Summit X460-24p switch, highlighting the power input, fan modules, and the SummitStack ports. The overall chassis is purple.
Un detaliat view of the SummitStack ports (Stack Port 1 and Stack Port 2) located on the rear of the switch, used for stacking multiple switches.
Eticheta produsului
This label provides critical identification information for the switch, including Model: 16403, Summit X460-24p, System No.: 800323-00-03, and Serial No.: 1052G-03941.
Componente optionale
This image shows the label for an optional Extreme Networks Summit 750W PoE AC Power Supply Unit (PSU), Model 10931, System No. 800382-00-03, Serial No. 1053A-41986.
This image displays the label for an optional Extreme Networks SummitStack Module, Model 16419, System No. 800384-00-01, Serial No. 1122G-02565.
Înființat
Ghid de instalare
Montare pe rack
The Summit X460-24p is designed for standard 19-inch rack mounting. Use the provided rack-mounting kit to secure the switch in a server rack. Ensure adequate ventilation around the unit.
Putere de conectare
Connect the power cord to the AC power inlet on the rear of the switch and then to a grounded electrical outlet. The switch will power on automatically.
Conectarea cablurilor de rețea
- Connect Ethernet cables from your network devices to the 24 10/100/1000Base-T PoE ports on the front panel.
- For uplink or fiber connections, use the SFP or shared Gigabit SFP ports.
- For stacking, connect SummitStack ports on multiple switches using appropriate stacking cables.
Initial Configuration Access
Access the switch's management interface via a console cable connected to the console port, or through a web browser if the switch has a default IP address configured. Refer to the Extreme Networks documentation for detailed initial setup procedures.
Instrucțiuni de operare
Operare de bază
Pornire/Oprire
The switch powers on automatically when connected to a power source. To power off, disconnect the power cord. For proper shutdown, it is recommended to use the software-based shutdown command if available.
Indicatoare LED
Observe the LED indicators on the front panel for status information regarding power, system health, port activity, and PoE status. Consult the full product documentation for a detailed explanation of each LED's behavior.
Interfață de management
The switch can be managed via a Command Line Interface (CLI) accessible through the console port or Telnet/SSH, or through a web-based graphical user interface (GUI).
Întreţinere
Îngrijire și întreținere
Curatenie
Keep the switch clean and free of dust. Use a soft, dry cloth for external cleaning. Do not use liquid or aerosol cleaners.
Actualizări de firmware
Periodically check the Extreme Networks support website for firmware updates to ensure optimal performance and security. Follow the provided instructions for firmware upgrade procedures.
Module de ventilatoare și surse de alimentare
The switch may feature hot-swappable fan and power supply modules. Refer to the Extreme Networks documentation for instructions on replacement if necessary.
Depanare
Probleme comune
Fără putere
- Asigurați-vă că este conectat corect cablul de alimentare atât la întrerupător, cât și la priză.
- Verificați că priza este funcțională.
Port Link Down
- Verificați conexiunea cablului Ethernet la ambele capete.
- Verificați dacă dispozitivul conectat este pornit și funcționează corect.
- Verificați starea portului prin intermediul interfeței de administrare.
Probleme de conectivitate la rețea
- Verify IP configuration and network settings.
- Check for conflicting IP addresses.
- Consult network diagnostics tools.
Specificații
Specificatii tehnice
| Caracteristică | Descriere |
|---|---|
| Model | Summit X460-24p (Part Number: 16403) |
| Porturi | 24 x 10/100/1000Base-T PoE+ ports, 4 x shared Gigabit SFP, 4 x SFP |
| Strat | Comutator gestionat stratul 3 |
| Marca | Rețele extreme |
| Tip de interfață | PoE, SFP |
| Numărul de sistem | 800323-00-03 |
| Număr de serie | 1052G-03941 |
| UPC | 683332278646 |
Garanție și suport
Informații despre garanție
This product typically comes with a 90-day limited warranty. For specific warranty terms and conditions, please refer to the official Extreme Networks warranty statement or contact your vendor.
Suport tehnic
For technical assistance, visit the official Extreme Networks support website or contact their customer service. Have your product model and serial number ready when seeking support.