1. Introducere
The ULANZI ST-06S is a versatile phone holder designed for photographers and videographers. It allows you to securely mount your smartphone to a camera's hot shoe or a tripod, providing flexible positioning for various shooting scenarios. This manual provides detailed instructions for the proper setup, operation, and care of your ST-06S phone holder.
2. Caracteristicile produsului
- Adjustable Z-Axis Angle: Allows for pitch angle adjustments without a separate ball head.
- Opțiuni de montare versatile: Features a standard 1/4" screw hole and two cold shoe mounts for accessories.
- Enhanced Safety & Ease of Use: Push-and-lock mechanism with thick, non-slip silicone pads and reinforced fixing gear.
- Rotație 360°: Quickly switch between portrait and landscape modes.
- Compact & Compatible: Lightweight (51g) and compatible with smartphones 2.36 to 3.54 inches wide.
3. Conținutul pachetului
- 1 x ULANZI ST-06S Camera Hot Shoe Phone Holder
4. Instrucțiuni de configurare
4.1 Attaching to a Camera Hot Shoe
- Locate the hot shoe mount on your camera.
- Slide the base of the ULANZI ST-06S into the camera's hot shoe.
- Tighten the locking knob at the base of the phone holder to secure it firmly in place.
Figure 4.1: Phone holder attached to a DSLR camera.
4.2 Attaching to a Tripod or Monopod
- Locate the 1/4" screw hole at the bottom of the ULANZI ST-06S.
- Screw the phone holder onto the 1/4" screw of your tripod, monopod, or selfie stick until secure.
Figure 4.2: Wide compatibility with various mounting options.
4.3 Introducerea smartphone-ului
- Press the release button on the side of the phone holder to expand the clamp.
- Carefully place your smartphone between the silicone pads.
- Release the button to allow the clamp to securely grip your phone. Ensure the phone is centered and held firmly.
Figure 4.3: Close-up of the phone clamp mecanism.
5. Instrucțiuni de utilizare
5.1 Adjusting the Z-Axis Angle
The ST-06S features an adjustable Z-axis angle for pitch adjustments. Loosen the knob located below the phone clamp to adjust the tilt angle. Once the desired angle is achieved, tighten the knob firmly to prevent movement.
Figure 5.1: Adjusting the tilt angle.
5.2 Rotație la 360°
The phone holder can rotate 360 degrees, allowing for quick switching between portrait and landscape orientations. Simply rotate the phone clamp to your preferred orientation.
Figure 5.2: 360-degree rotation for orientation changes.
5.3 Using Cold Shoe Mounts
The ST-06S is equipped with two cold shoe mounts on top of the phone clamp. These can be used to attach external accessories such as microphones or LED lights. Slide your accessory into the cold shoe mount until it clicks into place or is secured by its own locking mechanism.
Figura 5.3: Examples of using cold shoe mounts with accessories.
6. Întreținere
To ensure the longevity and optimal performance of your ULANZI ST-06S phone holder, follow these maintenance guidelines:
- curatenie: Wipe the holder with a soft, dry cloth. For stubborn dirt, a slightly damp se poate folosi o cârpă, urmată de uscarea imediată. Evitați substanțele chimice dure sau produsele de curățare abrazive.
- Depozitare: Store the phone holder in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspecţie: Periodically check all moving parts and screws for tightness. Ensure the silicone pads are free from debris and damage to maintain a secure grip.
7. Depanare
If you encounter any issues with your ULANZI ST-06S, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Smartphone is not held securely. | Clamp not fully engaged or silicone pads are dirty/damaged. | Ensure the one-click button mechanism is fully engaged. Check silicone pads for debris and clean if necessary. The reinforced fixing gear should provide a stable hold. |
| Difficulty adjusting the tilt angle or holder wobbles. | Locking knob not sufficiently tightened or mechanism is stiff. | Ensure the tilt adjustment knob is tightened firmly. If the mechanism feels stiff, gently work it back and forth to loosen. Avoid over-tightening the plastic screw to prevent damage. |
| Accessories do not fit into cold shoe mounts. | Incompatible accessory or debris in the mount. | Verify your accessory uses a standard cold shoe connection. Clear any debris from the cold shoe mounts. |
8. Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | ULANZI |
| Numele modelului | Suport pentru trepied pentru telefon |
| Numărul de model | ST-06S |
| Greutatea articolului | 1.58 uncii (aprox. 45 g) |
| Dimensiuni articol (Lxlxh) | 1.97 x 1.54 x 5.31 inci (aprox. 5 x 3.9 x 13.5 cm) |
| Lățimea telefonului compatibil | 2.36 to 3.54 inches (approx. 5.9 to 8.9 cm) |
| Tip de montare | Tripod, Hot Shoe |
| Caracteristici suplimentare | Adjustable, Foldable, Non-Slip, Rotatable |
| Material carcasă | Policarbonat |
9. Garanție și asistență
For information regarding warranty coverage, technical support, or replacement parts, please refer to the official ULANZI website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Termenii specifici ai garanției pot varia în funcție de regiune și de comerciant.