Samson PXD1 Wireless Lavalier Microphone Transmitter for USB User Manual

Introducere

This manual provides detailed instructions for the setup, operation, and maintenance of your Samson PXD1 Wireless Lavalier Microphone Transmitter. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance. The PXD1 is designed to capture audio wirelessly and transmit it to your Mac or Windows computer via a compatible USB receiver (sold separately).

Conținutul pachetului

Verificați dacă toate articolele enumerate mai jos sunt prezente în colet:

• Samson PXD1 Wireless Lavalier Microphone Transmitter
• Microfon Lavalier
• Cablu de încărcare USB
• Manual de utilizare (acest document)

Produs terminatview

The Samson PXD1 is a compact and lightweight beltpack transmitter designed for wireless audio capture. It operates on the 2.4 GHz frequency band, providing reliable digital audio transmission.

Figure 1: Samson PXD1 Wireless Lavalier Microphone Transmitter. This image shows the compact design of the PXD1 transmitter unit.

Componente cheie:

• Buton de alimentare: Used to turn the unit on and off.
• LED de stare: Indicates power, battery status, and pairing status.
• Intrare microfon: Mufă de 3.5 mm pentru conectarea microfonului lavalieră.
• Port USB: Pentru încărcarea bateriei interne.
• Prinzătoare de curea: Pentru atașarea transmițătorului la haine sau la curea.

Înființat

1. Încărcați transmițătorul: Connect the PXD1 transmitter to a USB power source using the provided USB cable. The Status LED will indicate charging status. Ensure the unit is fully charged before first use.
2. Connect the Lavalier Microphone: Plug the lavalier microphone's 3.5mm connector into the Microphone Input jack on the PXD1 transmitter. Secure the microphone to your clothing, approximately 6-8 inches from your mouth, for optimal sound capture.
3. Pair with USB Receiver: The PXD1 requires a compatible Samson USB receiver (sold separately) to function.
   • Turn on the PXD1 transmitter by pressing and holding the Power Button until the Status LED illuminates.
   • Plug the Samson USB receiver into an available USB port on your Mac or Windows computer.
   • Follow the pairing instructions provided with your specific Samson USB receiver. Typically, this involves pressing a pairing button on both the transmitter and receiver until a solid connection is indicated by their respective status LEDs.
4. Conectare la computer: Once paired, your computer should recognize the USB receiver as an audio input device. Select it as your input device in your operating system's sound settings and your preferred digital audio software.

Instrucțiuni de operare

1. Pornire/Oprire: Press and hold the Power Button for approximately 2 seconds to turn the PXD1 on or off. The Status LED will light up when powered on.
2. Monitor Audio Levels: Before recording or live streaming, perform a sound check. Speak into the lavalier microphone at your normal speaking volume and monitor the input levels in your digital audio software. Adjust the input gain on your computer or software as needed to prevent clipping (distortion) and ensure a strong signal.
3. Pozitionare: Ensure the lavalier microphone is positioned correctly to capture clear audio. Avoid placing it where it might rub against clothing, which can cause unwanted noise.
4. Gamă: Maintain a clear line of sight between the PXD1 transmitter and the USB receiver for optimal wireless performance. Obstacles can reduce the effective range.
5. Durata de viață a bateriei: The Status LED will change color or flash to indicate low battery. Recharge the unit promptly when this occurs.

Întreţinere

• curatenie: Use a soft, dry cloth to clean the exterior of the PXD1 transmitter. Do not use liquid cleaners or solvents.
• Depozitare: When not in use, store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Îngrijirea bateriei: For optimal battery longevity, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to approximately 50% every few months.
• Îngrijirea microfonului: Keep the lavalier microphone clean and free from dust or debris.

Depanare

Specificații

Marca:

SAMSON

Nume model:

PXD1

Tehnologie de conectivitate:

USB (via compatible receiver)

Tip conector:

USB (for charging/receiver connection)

Model polar:

Unidirectional (Lavalier Microphone)

Greutatea articolului:

2.4 uncii

Dimensiuni articol (L x l x H):

3.6 x 2.2 x 0.9 inci

Sursa de alimentare:

Electric cu fir (alimentat prin USB)

Utilizări recomandate:

Podcasting, Voice Recording

Dispozitive compatibile:

Personal Computer (Mac/Windows)

Numărul piesei producătorului:

SWXPD1BP

UPC:

809164218579

Garanție și suport

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Samson webPăstrați dovada achiziției pentru reclamații în garanție.

Samson Oficial Website: www.samsontech.com