Faber IN-NOVA SMART X A90 90cm Built-in Hood Instruction Manual

1. Introducere

Thank you for choosing the Faber IN-NOVA SMART X A90 Built-in Hood. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and keep them for future reference.

2. Informații de siguranță

• Asigurați-vă că instalația electrică respectă reglementările locale.
• Do not operate the hood without the grease filters installed.
• Regularly clean the hood and filters to prevent fire hazards.
• Nu flambați sub hota.
• Nu lăsați copiii la îndemâna aparatului în timpul funcționării și curățării.
• Deconectați aparatul de la sursa de alimentare înainte de orice întreținere sau curățare.

3. Descrierea și caracteristicile produsului

The Faber IN-NOVA SMART X A90 is a 90cm built-in extractor hood designed for seamless integration into your kitchen cabinetry. Its discreet and rational design, finished in stainless steel, ensures it blends perfectly with your kitchen aesthetics.

Caracteristicile cheie includ:

• Termina: Oţel inoxidabil
• comenzi: Pull-out knob for easy operation
• Iluminat: 2 LED lights for bright and energy-efficient illumination of the cooking area
• Filtre: Self-supporting stainless steel grease filters, dishwasher safe for easy cleaning
• Moduri de operare: Can be configured for extraction or filtering mode (optional carbon filters required for filtering mode, sold separately)
• Suction Speeds: 3 viteze
• Maximum Suction Capacity: 360 m³/h
• Clasa energetica: D

4. Instalare

Installation should be performed by a qualified technician in accordance with all local building and electrical codes. Ensure adequate ventilation in the room.

Pașii de instalare:

1. Despachetați cu grijă hota și verificați dacă există deteriorări.
2. Refer to the technical drawing for precise measurements and mounting points within your cabinet.
3. Prepare the cabinet opening according to the dimensions provided.
4. Mount the hood securely into the cabinet using appropriate fasteners.
5. Connect the ducting system for extraction or install the carbon filters for filtering mode.
6. Connect the electrical supply, ensuring proper grounding.

5. Funcționare

The hood is operated using the pull-out knob controls located on the front panel.

• Pornire/Oprire: Pull the knob to turn the hood on. Push it back in to turn it off.
• Reglarea vitezei ventilatorului: Rotate the knob to select one of the three available fan speeds.
• Controlul luminii: The LED lights are controlled independently. Refer to the specific symbols on the control panel for light activation.

6. Întreținere

Regular maintenance ensures optimal performance and longevity of your hood.

Filtre de grăsime:

• The stainless steel grease filters should be cleaned regularly, approximately every 2 months, or more frequently with heavy use.
• To remove, locate the release clips on each filter, press them, and pull the filter downwards.
• The filters are dishwasher safe. Use a mild detergent and a low-temperature cycle.
• Asigurați-vă că filtrele sunt complet uscate înainte de a le reinstala.

Carbon Filters (for filtering mode only):

• If your hood is operating in filtering mode, the optional active carbon filters (F3 - 112.0067.944 or FLL3 - 112.0544.470) need to be replaced periodically.
• Frecvența de înlocuire depinde de utilizare, de obicei la fiecare 3-6 luni.
• Refer to the carbon filter packaging for specific replacement instructions.

Curatenie generala:

• Clean the exterior surfaces of the hood with a soft cloth and a non-abrasive cleaner suitable for stainless steel.
• Do not use abrasive products, alcohol, or corrosive substances.

7. Depanare

Înainte de a contacta serviciul de asistență pentru clienți, vă rugăm să verificați următoarele probleme frecvente:

• Hood not operating: Ensure the appliance is properly plugged in and the circuit breaker has not tripped.
• Putere redusă de aspirare: Check if the grease filters are clean and properly installed. If using filtering mode, the carbon filters might need replacement. Ensure ducting is not obstructed.
• Luminile nu funcționează: Check if the light switch is activated. If individual bulbs are replaceable, check their condition.
• Lights not turning off: Verify the glass panel is fully closed, as it may activate a switch for the lights.
• Zgomot excesiv: Ensure all mounting screws are tight and the ducting is securely fitted. Check for any loose components or obstructions in the fan.

8. Specificații

9. Garanție și asistență

Your Faber IN-NOVA SMART X A90 Built-in Hood comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.

For technical assistance, spare parts, or warranty claims, please contact your local Faber authorized service center or the retailer where you purchased the product. Always provide the model number (F-305.0557.691) and serial number when seeking support.