PHILIPS StellarBright 929001818814

PHILIPS Stellar Bright 16W LED Bulb User Manual

Model: StellarBright 929001818814

1. Introducere

Thank you for choosing the PHILIPS Stellar Bright 16W LED Bulb. This manual provides essential information for the safe and efficient use of your new LED bulbs. These bulbs are designed for indoor use, offering cool daylight illumination with energy-efficient LED technology.

PHILIPS Stellar Bright 16W LED Bulb packaging and product.

The image displays the PHILIPS Stellar Bright 16W LED Bulb alongside its retail packaging. The packaging highlights key features such as 82% energy saving and EyeComfort Technology. The bulb itself is a standard A-shape with a B22 base.

2. Informații de siguranță

  • Always turn off the power supply before installing, removing, or cleaning the bulb.
  • Do not use if the bulb or its packaging appears damaged.
  • Acest bec este conceput doar pentru utilizare în interior.
  • Nu încercați să dezasamblați sau să modificați becul. În interior nu există piese care pot fi reparate de utilizator.
  • Ensure the bulb is securely screwed into the fixture to prevent accidental detachment.
  • This bulb is non-dimmable. Do not use with dimmer switches, as this may cause damage or malfunction.
  • Vol. De operaretage is 220-240 volts. Ensure your fixture's voltage îndeplinește această cerință.

3. Configurare și instalare

3.1 Despachetarea

Carefully remove the LED bulbs from their packaging. Inspect each bulb for any visible damage before installation.

3.2 Etapele de instalare

  1. Opriți alimentarea: Locate the light switch or circuit breaker controlling the fixture where the bulb will be installed and turn it off.
  2. Pregătirea dispozitivului de fixare: If replacing an old bulb, allow it to cool completely before carefully unscrewing it from the fixture.
  3. Instalați un bec nou: Gently screw the PHILIPS Stellar Bright 16W LED Bulb into the B22D base socket. Turn clockwise until it is snug, but do not overtighten.
  4. Restabiliți puterea: Reconectați alimentarea cu energie de la întrerupător sau de la întrerupătorul de circuit.
PHILIPS Stellar Bright 16W LED Bulb with B22 base.

Un prim plan view of the PHILIPS Stellar Bright 16W LED Bulb, highlighting its standard A-shape and B22D bayonet cap base, ready for installation.

4. Instrucțiuni de utilizare

Operating the PHILIPS Stellar Bright 16W LED Bulb is straightforward:

  • Pornire/Oprire: Folosește întrerupătorul standard de perete pentru a aprinde sau a stinge lumina.
  • Nereglabil: This LED bulb is designed to operate at full brightness only and is not compatible with dimmer switches. Using it with a dimmer may lead to flickering, reduced lifespan, or damage to the bulb.
Key features of PHILIPS Stellar Bright 16W LED Bulb.

This graphic illustrates the main benefits of the PHILIPS Stellar Bright 16W LED Bulb, including up to 82% energy saving, 16W power consumption, LED technology, and EyeComfort Technology for reduced eye strain.

5. Întreținere

The PHILIPS Stellar Bright 16W LED Bulb requires minimal maintenance:

  • curatenie: Ensure the power is off and the bulb is cool before cleaning. Use a soft, dry, lint-free cloth to wipe the bulb. Do not use liquid or abrasive cleaners.
  • Înlocuire: When the bulb reaches the end of its operational life, replace it with a new PHILIPS Stellar Bright 16W LED Bulb or an equivalent LED bulb with a B22D base.
PHILIPS Stellar Bright LED Bulb providing eco-friendly lighting in a room.

An image showing the PHILIPS Stellar Bright LED Bulb installed in a wall fixture, illuminating a modern living space with soft, eco-friendly light. The room features a sofa with cushions and a minimalist design.

6. Depanare

If you encounter issues with your PHILIPS Stellar Bright 16W LED Bulb, refer to the following common problems and solutions:

ProblemăCauza posibilaSoluţie
Becul nu se aprindeFără curent la dispozitiv
Bulb not screwed in properly
Bec defect
Dispozitiv defect
Verificați întrerupătorul de lumină și întrerupătorul de circuit.
Ensure the bulb is securely tightened in the socket.
Replace the bulb with a known working one.
Have the fixture inspected by a qualified electrician.
Becul pâlpâieFolosit cu un variator de intensitate
Conexiune slabă
Voltagfluctuațiile
Remove from dimmer circuit; this bulb is non-dimmable.
Asigurați-vă că becul este strâns bine.
Consultați un electrician dacă volumultagProblemele persistă.
Light output is lowWat bec incorecttage for desired brightness
Dust or dirt on bulb/fixture
Ensure the 16W bulb meets your brightness requirements.
Clean the bulb and fixture as per maintenance instructions.
High-quality LED lighting from PHILIPS Stellar Bright bulb illuminating an outdoor entrance.

The PHILIPS Stellar Bright LED Bulb is shown installed in an outdoor fixture, casting bright, high-quality light over the entrance of a building, demonstrating its suitability for various lighting needs.

7. Specificații

Detailed technical specifications for the PHILIPS Stellar Bright 16W LED Bulb:

CaracteristicăCaietul de sarcini
MarcaPHILIPS
Numele modeluluiStellarBright
Numărul de model929001818814_6
Tip de luminăLED
Wattage16 wați
Baza beculuiB22D
Culoare deschisaLumină rece a zilei
Temperatura de culoare6500 Kelvin
Vol. De operaretage220-240 volți
Putere luminoasă (maximă)1440 lumeni
Eficienţă90 lumens per watt, Energy Efficient
Durata de funcționare a sursei de lumină15,000 de ore
Caracteristica specialăEnergy Efficient, Non Dimmable
Tip materialPolicarbonat (PC)
Utilizare în interior și exteriorDe interior
Număr de articole (în pachet)6 număr
Item Weight (for pack)480 grame
PHILIPS Stellar Bright LED Bulb providing comfortable, eye-friendly light for a family.

This image depicts a family, including parents and children, comfortably relaxing in a bedroom illuminated by the PHILIPS Stellar Bright LED Bulb. The lighting is designed to be gentle on the eyes, promoting well-being.

8. Garanție și asistență

8.1 Informații despre garanție

This PHILIPS Stellar Bright 16W LED Bulb comes with a 2 an garanție on the product from the date of invoice. Please retain your purchase receipt as proof of purchase for warranty claims.

8.2 Manufacturer and Importer Contact

For support, warranty claims, or further inquiries, please contact:

Producător: Signify Innovations India Limited (formerly known as Philips Lighting India Limited)
PS ARCADIA CENTRAL, 3A, 3rd floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata – 700 017, India

Importator: Signify Innovations India Limited
PS Arcadia Central, 3A, 3rd Floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata-700017, West Bengal, India

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.