1. Introducere
This manual provides detailed instructions for the installation, operation, and maintenance of your EMANER Model 7042-WH Dual-Head LED Security Light. Please read this manual thoroughly before installation and retain it for future reference.
Faţă view of the EMANER Dual-Head LED Security Light, highlighting its two rotatable light heads and motion sensor. A 120V warning label is visible.
2. Informații de siguranță
AVERTIZARE: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes.
- Asigurați-vă că sursa de alimentare este de 120V AC.
- Nu instalați în apropierea materialelor combustibile.
- This product is designed for outdoor use and is IP65 waterproof rated.
- Consultați un electrician calificat dacă nu sunteți sigur de procesul de instalare.
- Nu priviți direct în sursa de lumină LED atunci când este aprinsă.
3. Produs terminatview și Componente
The EMANER Model 7042-WH is a dual-head LED security light featuring a rotatable design and multiple intelligent control modes. Key components include:
- Rotatable Light Heads: Two adjustable LED light panels.
- Senzor de mișcare PIR: Senzor infraroșu pasiv pentru detectarea mișcării.
- Butoane de control: For adjusting time delay and sensitivity.
- Hardware de montare: Includes mounting strap, screws, and wire nuts.
A diagram providing precise measurements of the security light's length, width, height, and the dimensions of the rotatable light heads and PIR motion sensor.
4. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Marca | EMANER |
| Numărul de model | 7042-WH |
| Culoare | White Fixture |
| Material | ABS Plastic + Aluminum internal |
| Tip sursă de lumină | LED |
| Wattage | 28 wați |
| Luminozitate | 2800 lumeni |
| Temperatura de culoare | 5000K alb lumina zilei |
| Voltage | 120 volți |
| Nivel de rezistență la apă | IP65 rezistent la apa |
| Unghiul de detectare | 180 de grade |
| Distanța de detectare | 20-70 feet (adjustable) |
| Tip de montare | Wall mount, Eave/Soffit mount |
| Dimensiunile produsului | 9 cm L x 7.4 cm l x 6.4 cm Î |
| Greutatea articolului | 1.74 lire sterline |
5. Configurare și instalare
This LED security light is designed for easy installation. Follow these steps carefully:
5.1 Preinstalare
- Opriți alimentarea: Disconnect power at the circuit breaker or fuse box before beginning installation.
- Select mounting location: Choose a wall or eave/soffit location that provides the desired coverage and is within reach of existing wiring. Recommended mounting height is 6.5-12 feet.
- Despachetați conținutul: Ensure all components are present: light fixture, mounting strap, screws, and wire nuts.
5.2 Cablare și montare
- Attach the mounting strap to your existing electrical outlet box using the provided screws.
- Conectați firele electrice:
- Conectați negru Cablu (sub tensiune) de la dispozitivul de iluminat la negru Cablu (sub tensiune) din cutia de priză.
- Conectați alb Fir (neutru) de la dispozitivul de iluminat la alb Fir (neutru) din cutia de priză.
- Conectați green/bare copper Cablu (de împământare) de la dispozitivul de iluminat la green/bare copper Fir (de împământare) de la cutia de priză.
- Carefully tuck the wires into the outlet box.
- Align the light fixture with the mounting strap and secure it with the decorative cover and fixture mounting screw.
- Adjust the light heads and motion sensor to your desired angles.
Diagram for installing the security light, detailing wire connections, mounting strap, back plate, and attaching the light head and sensor.
Illustrations showing two common installation methods: mounting the light under an eave or soffit, and mounting it directly onto a wall.
6. Moduri de operare și setări
The security light features a control panel with dials for TIME and SENSITIVITY, and a slide switch for selecting operating modes. All modes operate only at night or in dark environments, automatically turning off at dawn.
An infographic explaining the various operating modes: TEST, AUTO, Motion Sensor, 6 Hours, and Dusk to Dawn (PC) modes, along with their respective time delay and sensitivity settings.
6.1 Panoul de control pesteview
Detaliat view of the control panel, showing the 'TIME' dial (5S, 3MIN, TEST) and 'SENSITIVITY' dial (+/-) for adjusting light duration and motion detection range.
- TIME Dial: Adjusts how long the light stays on after motion is detected (5 seconds to 3 minutes). The 'TEST' setting is for initial setup.
- SENSITIVITY Dial: Adjusts the motion sensor's detection range (Low to High sensitivity, 20-70 feet).
- Comutator glisant mod: Selects between AUTO, OFF (Motion Sensor), 6H (6 Hours), and PC (Dusk to Dawn Stay On) modes.
An illustration demonstrating the motion sensor's 120-degree sensing angle and adjustable detection distance of 20-39 feet (6-12 meters) from a mounting height of 6.5-12 feet.
6.2 Moduri de operare
- Mod TEST: (Slide switch to 'TEST' on TIME dial) This mode is for testing after installation. When connected to AC power, the light will turn on for 5 seconds based on the time delay setting.
- AUTO Dim Light Mode: (Slide switch to 'AUTO') The security light turns on with dim light at dusk. When motion is detected, it switches to 100% brightness. After no motion is detected for the set time delay (5 seconds to 3 minutes), it returns to dim light. Automatically turns off at dawn.
- Motion On/Off Mode: (Slide switch to 'OFF') The security flood light only turns on at 100% brightness when motion is activated. It automatically turns off when no motion is detected for the set time delay. Automatically turns off at dawn.
- 6 Hours Mode: (Slide switch to '6H') The flood light turns on at 100% brightness and stays on for 6 hours. After 6 hours, it automatically switches to 'AUTO Dim Light Mode'. Automatically turns off at dawn.
- Dusk to Dawn Stay On Mode (PC Mode): (Slide switch to 'PC') The motion security light turns on with bright light (100% brightness) and stays on all night. It automatically turns off in the daytime.
7. Întreținere
Regular maintenance ensures optimal performance and longevity of your EMANER LED Security Light.
- curatenie: Periodically clean the light heads and motion sensor lens with a soft, damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
- Inspecţie: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections.
- Fără piese care pot fi reparate de utilizator: The LED light source is non-removable and not user-serviceable. Do not attempt to open the light heads.
8. Depanare
If you encounter issues with your security light, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde noaptea. | 1. Alimentarea este oprită. 2. Photocell sensor is detecting ambient light. 3. Problemă de cablare. | 1. Verificați întrerupătorul/siguranța. 2. Ensure the sensor is not obstructed or exposed to other light sources. 3. Verify all wiring connections are secure. |
| Lumina rămâne aprinsă continuu. | 1. Mode set to 'PC' (Dusk to Dawn Stay On). 2. Constant motion detected. 3. Eroare de cablare. | 1. Change mode to 'AUTO' or 'OFF'. 2. Adjust sensor sensitivity or angle to avoid constant triggers. 3. Verificați din nou cablajul. |
| Light flashes or cycles on/off rapidly. | 1. Intermittent power supply. 2. Sensor interference. 3. Unitate defectă. | 1. Check power connections. 2. Ensure no objects are moving within the sensor's range. 3. Contactați asistența pentru clienți dacă problemele persistă. |
| Senzorul de mișcare nu detectează. | 1. Sensibilitatea setată prea scăzută. 2. Sensor obstructed or misaligned. 3. Temperature too high (reduces PIR effectiveness). | 1. Increase SENSITIVITY setting. 2. Clear obstructions and adjust sensor angle. 3. This is normal behavior in very hot weather. |
9. Informații despre garanție
The EMANER Model 7042-WH LED Security Light comes with a Garanție de 2 an de la producătorAceastă garanție acoperă defectele de materiale și de fabricație în condiții normale de utilizare. Vă rugăm să păstrați dovada achiziției pentru reclamațiile în garanție.
10. Asistență pentru clienți
For technical assistance, warranty claims, or any questions regarding your EMANER product, please contact EMANER customer service. You can typically find contact information on the product packaging or through the retailer where the product was purchased.
Alternatively, you may visit the official EMANER brand store online or use the 'Ask a question' feature on the product's retail page.