XENOCAM 8CH 1080N Hybrid 5-in-1 AHD DVR User Manual

1. Introducere

This manual provides comprehensive instructions for the installation, configuration, and operation of your XENOCAM 8-channel 1080N Hybrid 5-in-1 AHD Digital Video Recorder (DVR). This DVR supports multiple video input formats including Analog, AHD, HD-TVI, CVI, and IP (NVR) cameras, offering versatile surveillance solutions. Please read this manual thoroughly before operating the device to ensure proper usage and optimal performance.

2. Informații de siguranță

• Asigurați-vă că sursa de alimentare voltage matches the DVR's requirements.
• Do not expose the DVR to moisture, rain, or extreme temperatures.
• Avoid placing the DVR in direct sunlight or near heat sources.
• Nu deschideți DVR-ul.asing; consultați personalul calificat pentru toate lucrările de service.
• Install the DVR in a well-ventilated area to prevent overheating.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• XENOCAM 8CH 1080N Hybrid 5-in-1 AHD DVR Unit
• Adaptor de alimentare
• Mouse USB
• Screws for Hard Drive Installation
• Manual de utilizare (Ghid de pornire rapidă)

Figura 3.1: Included accessories for the XENOCAM DVR system.

4. Produs terminatview

4.1 Panourile din față și din spate

Familiarize yourself with the ports and indicators on the DVR unit.

Figura 4.1: Front and Rear Panels of the DVR.

• Panoul frontal: Power indicator, HDD activity indicator, Alarm indicator, IR receiver, Navigation buttons (ESC, Enter, Menu).
• Panoul din spate:
  • VIDEO IN (1-8): BNC connectors for analog, AHD, HD-TVI, CVI camera inputs.
  • INTRARE/IEȘIRE AUDIO: RCA connectors for audio input and output.
  • HD-port (HDMI): Video output to monitor/TV.
  • VGA: Video output to monitor/TV.
  • USB: Ports for mouse, USB backup devices.
  • NET (RJ45): Port Ethernet pentru conexiune la rețea.
  • DC 12 V: Putere.

4.2 Dimensiunile produsului

The physical dimensions of the DVR unit are important for installation planning.

Figura 4.2: DVR Dimensions (Length: 9.96 in, Width: 9.37 in, Height: 1.65 in).

5. Configurare

5.1 Hard Drive Installation (HDD not included)

A hard drive is required for recording video footage. Ensure the DVR is powered off before installation.

1. Deșurubați și scoateți capacul superior al DVR-ului.
2. Connect the SATA power and data cables from the DVR to the hard drive.
3. Fixați hard disk-ul pe carcasa DVR-ului folosind șuruburile furnizate.
4. Puneți la loc capacul superior și fixați-l cu șuruburi.

5.2 Camera and Monitor Connection

Connect your cameras and a monitor to the DVR as illustrated below.

Figura 5.1: System Connection Diagram.

• Connect BNC cables from your cameras to the "VIDEO IN" ports (1-8) on the DVR.
• Connect a monitor or TV to the DVR using either the HDMI or VGA port.
• Conectați mouse-ul USB la un port USB al DVR-ului.
• Pentru telecomandă viewing, connect an Ethernet cable from the DVR's "NET" port to your router.
• Conectați adaptorul de alimentare la intrarea „DC 12V” și apoi la o priză.

5.3 Pornirea inițială și configurarea

Upon first power-up, the DVR will guide you through an initial setup wizard.

1. Porniți DVR-ul.
2. Follow the on-screen prompts to set the language, date/time, and network settings.
3. If a new hard drive is installed, the system may prompt you to format it. Confirm to proceed.
4. Configure the channel type to match your connected cameras (Analog, AHD, TVI, CVI, IP).

Figura 5.2: Language and Channel Type Configuration Interface.

Nota: To enable IP cameras (NVR mode), you may need to select a hybrid channel type that supports IP inputs. Refer to the on-screen options for specific configurations like "IP" or "Hybrid" modes.

6. Instrucțiuni de utilizare

6.1 Navigare în interfața utilizator

Use the connected USB mouse to navigate the DVR's graphical user interface (GUI).

Figura 6.1: Main Menu Interface.

• Faceți clic dreapta: Access the main menu or return to the previous screen.
• Faceți clic stânga: Selectați opțiuni sau confirmați acțiuni.
• Meniul principal: Provides access to system settings, recording, playback, network, and advanced features.

6.2 În direct View

After successful camera connection, the live view will display video feeds from all active channels. You can switch between single-channel view and multi-channel grid views.

6.3 Configurare înregistrare

Access "Record Conf" from the main menu to set up recording schedules and motion detection.

Figura 6.2: System Menu Interface.

• Programați înregistrarea: Set continuous recording or specific time periods for each channel.
• Detectarea mișcării: Enable motion-triggered recording for selected channels. Configure sensitivity and detection areas. This feature can significantly extend recording times.
• Alarma: Configure alarm actions such as email notifications or mobile push alerts upon motion detection.

6.4 Redare

Select "PlayBack" from the main menu to review inregistrat footage.

• Choose the date and time range for playback.
• Select the desired channels to view.
• Folosește comenzile de redare (redare, pauză, derulare rapidă înainte, derulare înapoi) pentru a naviga prin fișiere.tage.

6.5 Remote Access (Xmeye App)

The Xmeye app allows live viewing and playback on smartphone devices via Wi-Fi, 2G, 3G, or 4G networks.

1. Download the "Xmeye" app from your smartphone's app store.
2. Înregistrează un cont sau autentifică-te.
3. Add your DVR device by scanning the QR code (usually found in the DVR's network settings) or manually entering the device ID.
4. Ensure your DVR is connected to the internet via the Ethernet port.

6.6 Backup

To back up video footage, connect a USB flash drive to one of the DVR's USB ports. Navigate to the "Backup" option in the main menu to select footage and initiate the transfer.

7. Întreținere

• Gestionarea hard disk-ului: Regularly check the hard drive status in the system settings. Format the hard drive periodically if needed, ensuring important footage is backed up first.
• curatenie: Keep the DVR unit clean and free from dust. Use a soft, dry cloth. Do not use liquid cleaners.
• Actualizări firmware: Periodically check the XENOCAM official website for available firmware updates. Follow the provided instructions carefully for any updates.

8. Depanare

9. Specificații

• Model: A6708NH
• Intrare video: 8 Channels (Analog, AHD, HD-TVI, CVI, 1080P NVR)
• Rezoluție video: 1080N (1080P Lite), 960H, 720P, 1080P (IP)
• Ieșire video: hdmi, vga
• Intrare/ieșire audio: RCA
• Hard Disk Support: Până la 6 TB (HDD-ul nu este inclus)
• Conectivitate: Ethernet (RJ45), USB, Wi-Fi (via USB Wi-Fi adapter, if supported)
• Acces de la distanță: Xmeye App (iOS/Android)
• Alimentare electrică: DC 12V
• Dimensiuni produs: 25.3 cm L x 23.8 cm l x 4.2 cm Î (9.96" L x 9.37" l x 1.65" Î)
• Greutatea articolului: 2.53 lire (1.15 kg)

10. Garanție și asistență

XENOCAM products typically come with a limited warranty. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official XENOCAM webPăstrați bonul fiscal ca dovadă a achiziției.

For further assistance, you may contact XENOCAM customer support through their official channels.