Manual de instrucțiuni pentru bara de lumină Lumitec Razor

Introducere

The Lumitec Razor Light Bar is a high-performance, low-profile LED light solution engineered specifically for demanding marine environments. Its sleek design and powerful illumination make it an ideal choice for various boating applications, providing exceptional light output while maintaining a discreet presence on your vessel. With a robust construction and advanced features, the Razor Light Bar is built to withstand harsh conditions and deliver reliable performance.

Caracteristici cheie

• Elegant, Low-Profile Proiecta: Measuring only 1.5 inches high and 18 inches wide, the Razor Light Bar is designed to integrate seamlessly with marine vessels, minimizing visual obstruction.
• Ieșire ridicată: Delivers an impressive 10,000 lumens for powerful and effective illumination.
• Construcție durabilă: Constructed from die-cast aluminum with a proprietary powder coating process, ensuring exceptional durability and resistance to corrosion, tested for 2000 hours of salt spray.
• Montare versatilă: Can be surface mounted directly onto a hardtop or integrated into the hardtop during its initial build. It also supports inverted mounting with specially designed inverted logos for specific applications.
• Flood and Spot Optics: Available in both flood and spot beam patterns to suit various lighting needs, from wide-area illumination to focused long-distance light.
• Reglabil: Features Lumitec's Timed Toggle Protocol (TTP) for adjustable light intensity, allowing users to set the brightness to their preference.
• Economie de spațiu: Its compact design allows for efficient placement alongside other electronic devices such as FLIR cameras and radars without causing obstruction.
• Consum de putere redusă: Operates efficiently with a 10 Amp draw at 12vDC.

Produs terminatview

The Lumitec Razor Light Bar features a sleek, low-profile design with multiple LED elements, ideal for marine environments.

Side profile of the Razor Light Bar, highlighting its compact form factor and integrated control button.

Spate view of the light bar, showcasing the heat sink fins for efficient thermal management and the cable entry point.

Detailed technical drawing providing precise dimensions (length, width, height) of the Razor Light Bar for installation planning.

Instalare și configurare

Opțiuni de montare

The Razor Light Bar is designed for flexible installation on various marine surfaces. It can be surface mounted directly onto a hardtop or integrated into the hardtop during its initial build for a seamless look. All required hardware for surface mounting is included.

Avoiding Bow Glare

To ensure optimal visibility and prevent bow glare (light reflecting off the bow of the boat), proper light placement is crucial. Follow these steps:

1. Temporarily place the unsecure light at the front of the hardtop and connect temporary power.
2. Observe the light beam. If it creates bow glare (light reflecting off the bow), move the light backward on the hardtop.
3. Continue moving the light backward until the bow glare is eliminated. The edge of the hardtop should shield the bow area and truncate the light beam effectively.
4. Once the optimal position is found, mark the location and proceed with permanent installation using the provided hardware.

Instrucțiuni de operare

Dimming Function (Timed Toggle Protocol - TTP)

The Razor Light Bar features Lumitec's Timed Toggle Protocol (TTP) for dimming. This allows you to adjust the light intensity by cycling the power switch.

1. Turn the light ON. It will begin to ramp up in brightness over a 4-second period.
2. To set a desired intensity, simply turn the light OFF and then ON again at any point during the ramp-up period. The light will lock into the intensity it was at when toggled.
3. To return to full brightness, turn the light OFF and then ON again after it has been off for more than 4 seconds.

Nota: Razor is also available with PLI technology, making it compatible with Lumitec's Poco digital lighting control system for advanced control options.

Întreţinere

To ensure the longevity and optimal performance of your Lumitec Razor Light Bar, regular maintenance is recommended.

• curatenie: Periodically clean the light bar with fresh water and a soft cloth to remove salt residue, dirt, and grime. Avoid abrasive cleaners or harsh chemicals that could damage the finish or lens.
• Inspecţie: Regularly inspect the light bar for any signs of damage, loose connections, or corrosion. Ensure all mounting hardware is secure.
• Cablaj: Check wiring for any fraying or damage. Ensure connections remain watertight.

Depanare

Specificații

Garanție și asistență

Lumitec products are built to the highest standards. For specific warranty details and support, please refer to the official Lumitec website-ul sau contactați serviciul pentru clienți.

Visit the Lumitec Store: Lumitec Store on Amazon