Introducere
This manual provides detailed instructions for the installation, operation, and maintenance of your Hertz Cento Series CK-165L 6.5-inch Two-Way Component Speaker Kit. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
The Hertz Cento Series CK-165L system is designed to deliver natural sound with solid and controlled low frequencies, featuring a C165 L woofer, C26 tweeter, and dedicated crossovers. Its components are engineered for high performance and flexible installation.
Conținutul pachetului
La despachetare, vă rugăm să verificați dacă toate componentele enumerate mai jos sunt prezente și nedeteriorate:
- 1x C165 L Woofer (pair)
- 1x C26 Tweeter (pair)
- 1x Crossover for Woofer (pair)
- 1x Crossover for Tweeter (pair)
- Mounting hardware (screws, clips, grilles)
- Manual de instrucțiuni (acest document)
Figura 1: Pesteview of the Hertz Cento Series CK-165L component speaker kit, including woofers, tweeters, and crossovers.
Configurare și instalare
Professional installation is recommended for optimal performance and to avoid damage to your vehicle's electrical system or the speakers. Ensure the vehicle's battery is disconnected before beginning installation.
1. Instalarea difuzorului de woofer
The C165 L woofer features a non-pressed paper cone for natural sound reproduction. Select a suitable mounting location in your vehicle, typically door panels or kick panels, ensuring adequate depth and clearance.
- Prepare the mounting surface, ensuring it is clean and free of obstructions.
- Secure the woofer using the provided mounting screws. Do not overtighten.
- Connect the woofer to the dedicated woofer crossover output.
Figura 2: A închide view of the Hertz Cento Series C165 L woofer.
2. Instalarea tweeterului
The C26 tweeter features a soft Tetolon fiber dome for detailed musical nuances. Tweeters should be mounted in locations that provide optimal sound staging, such as A-pillars or dash corners.
- Choose a mounting method (flush mount, surface mount) appropriate for your vehicle and desired sound.
- Secure the tweeter in place.
- Connect the tweeter to the dedicated tweeter crossover output.
Figura 3: Detaliat view of the Hertz Cento Series C26 tweeter with its protective grille.
3. Crossover Installation
The ultra-compact crossovers (CCX 2W for woofer, CCX 2T for tweeter) are designed for flexible installation. Mount them in a dry, protected area, away from heat sources and moisture.
- Identify the input and output terminals on each crossover.
- Connect the main audio signal from your amplifier to the input of the crossovers.
- Connect the woofer crossover output to the C165 L woofer.
- Connect the tweeter crossover output to the C26 tweeter.
- The tweeter filter is 12 dB/oct. with two levels of attenuation (+3dB, 0dB). Adjust the attenuation switch on the tweeter crossover as desired for sound balance.
Figura 4: Hertz Cento Series crossover unit, showing input/output connections.
Figura 5: Hertz Cento Series crossover unit, highlighting the +3dB/0dB attenuation switch for the tweeter.
Instrucțiuni de operare
Once installed, connect your vehicle's battery and power on your car audio system. Start with the volume at a low level and gradually increase it to your desired listening level. Adjust the audio settings on your head unit or amplifizer pentru a regla fin sunetul conform preferințelor dumneavoastră.
- Redare inițială: Begin with moderate volume for the first few hours of use to allow the speaker components to break in.
- Controlul volumului: Avoid prolonged listening at extremely high volumes to prevent speaker damage and hearing loss.
- Setări audio: Utilize your head unit's equalizer and balance/fader controls to optimize the sound stage and tonal balance within your vehicle.
Întreţinere
The Hertz Cento Series CK-165L speakers require minimal maintenance to ensure long-lasting performance.
- curatenie: Folosiți o cârpă moale și uscată pentru a șterge ușor praful de pe grilele și conurile difuzoarelor. Evitați utilizarea substanțelor chimice dure sau a produselor de curățare abrazive.
- Inspecţie: Verificați periodic strângerea conexiunilor difuzoarelor și asigurați-vă că niciun fir nu este uzat sau expus.
- Protecția mediului: While designed for automotive use, avoid exposing speakers to excessive moisture or extreme temperatures beyond typical vehicle conditions.
Depanare
If you encounter issues with your Hertz Cento Series CK-165L speaker kit, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Fără sunet din difuzoare | Loose wiring connection, amplifier off, incorrect head unit settings, blown fuse. | Check all wiring connections at the speakers, crossovers, and amplifier. Asigurați-vă amplifier is powered on. Verify head unit output settings. Check vehicle and ampsiguranțe de lifter. |
| Sunet distorsionat | Volum prea mare, amptăiere a difuzorului, setări incorecte de câștig, difuzor deteriorat. | Reduceți volumul. Verificați amplifier gain settings and adjust if necessary. Inspect speaker cones for physical damage. |
| Un difuzor nu funcționează | Loose connection to that specific speaker, faulty speaker, faulty crossover. | Check connections for the non-working speaker. Swap speakers or crossovers (if possible) to isolate the faulty component. |
| Lipsa basului sau a înaltelor | Incorrect crossover wiring, head unit EQ settings, tweeter attenuation switch setting. | Verify crossover connections. Adjust head unit equalizer settings. Check the tweeter attenuation switch on the crossover (+3dB for more treble, 0dB for standard). |
If the problem persists after attempting these solutions, please contact Hertz customer support or a qualified car audio technician.
Specificații
Detailed technical specifications for the Hertz Cento Series CK-165L Component Speaker Kit:
- Tip component: Sistem de componente cu două căi
- Dimensiune woofer: 165 mm (6.5 țoli)
- Dimensiune Tweeter: 26 mm (1 inchi)
- Power Handling - Peak: 300 W
- Power Handling - Continuous: 100 W
- Impedanta: 4 Ω
- Raspuns in frecventa: 50 ÷ 22,500 Hz
- Sensitivity dB SPL: Tweeter: 92 dB, Woofer: 91 dB
- Woofer Voice Coil Ø: 25 mm (1 inchi)
- Material con de woofer: Non-Pressed Paper (NPP)
- Material dom pentru tweeter: Soft Tetolon Fiber
- Magnet pentru woofer: Ferită
- Magnet pentru tweeter: Neodim
- Tip crossover: Separate ultra-compact crossovers (12 dB/oct. for tweeter with 2 attenuation levels, 6 dB/oct. for woofer)
- Greutatea articolului: 5.5 lire sterline
- Dimensiuni produs: 6.5 x 6.5 x 2.48 inci
- Număr de model: CK165L
Informații despre garanție
The Hertz Cento Series CK-165L Component Speaker Kit comes with a 1 an garanție de producător de la data achiziției. Această garanție acoperă defectele de materiale și de fabricație în condiții normale de utilizare.
Garanția nu acoperă daunele rezultate din:
- Instalare sau cablare necorespunzătoare.
- Accident, abuse, misuse, or neglect.
- Reparații sau modificări neautorizate.
- Exposure to extreme temperatures, moisture, or corrosive environments.
- Uzură normală.
Please retain your proof of purchase for warranty claims. For warranty service, contact Hertz customer support.
Suport și Contact
For further assistance, technical support, or inquiries regarding your Hertz Cento Series CK-165L Component Speaker Kit, please refer to the official Hertz website-ul sau contactați departamentul de servicii pentru clienți.
Oficial Website: www.hertz-audio.com
Please have your product model number (CK-165L) and proof of purchase ready when contacting support.