Flamaker 4-Piece Outdoor Patio Bistro Set

Informații importante privind siguranța

Vă rugăm să citiți și să înțelegeți toate instrucțiunile înainte de asamblare și utilizare. Păstrați acest manual pentru referințe ulterioare.

• Do not exceed the maximum weight capacity of 330 pounds per seating unit.
• Aveți grijă la muchiile ascuțite în timpul procesului de asamblare.
• This furniture is not heat-resistant. Avoid placing hot items directly on surfaces without protection.
• Asigurați-vă că toate șuruburile și șuruburile sunt strânse bine înainte de utilizare. Verificați periodic și strângeți din nou, dacă este necesar.
• Așezați mobila pe o suprafață plană și stabilă pentru a preveni răsturnarea.

Conținutul pachetului

Verificați dacă toate componentele enumerate mai jos sunt prezente înainte de a începe asamblarea. Dacă lipsesc sau sunt deteriorate piese, vă rugăm să contactați serviciul de asistență pentru clienți.

Imagine: Pesteview of all components and hardware for assembly.

Lista de piese:

• 1 x Loveseat Frame
• 2 x Single Chair Frames
• 1 x Coffee Table Frame
• 1 x Tempered Glass Tabletop
• Textilene Fabric for Loveseat Seat and Back
• Textilene Fabric for Single Chair Seats and Backs (2 sets)

Lista hardware:

• Bolts (various sizes)
• Șaibe
• Nuci
• Allen Wrench (Assembly Tool)
• Suction Cups for Glass Tabletop
• Screw Full Covers

Instructiuni de asamblare

Follow these steps carefully to assemble your Flamaker 4-Piece Outdoor Patio Bistro Set. It is recommended to assemble on a soft, clean surface to prevent scratches.

Step 1: Assemble the Single Chairs

1. Attach the backrest frame to the seat frame using the provided bolts and washers. Do not fully tighten yet.
2. Connect the armrests to the assembled seat and backrest. Ensure all holes align.
3. Once all components are loosely connected, place the chair on a flat surface and gradually tighten all bolts evenly.
4. Install the screw full covers over exposed bolt heads for a finished look and protection.

Image: Step-by-step assembly for a single chair.

Step 2: Assemble the Loveseat

1. Attach the two backrest sections to the loveseat seat frame using the appropriate bolts and washers.
2. Connect the side armrest frames to the main loveseat structure.
3. Ensure all parts are aligned, then place the loveseat on a flat surface and tighten all bolts securely and evenly.
4. Apply screw full covers to all exposed bolt heads.

Image: Step-by-step assembly for the loveseat.

Step 3: Assemble the Coffee Table

1. Attach the four legs to the table frame using the provided hardware. Do not fully tighten.
2. Ensure the frame is stable and level, then tighten all bolts.
3. Place the suction cups into the designated holes on the table frame.
4. Carefully place the tempered glass tabletop onto the suction cups, ensuring it is centered and secure.

Image: Step-by-step assembly for the coffee table.

Îngrijire și întreținere

Proper care will extend the life and appearance of your patio set.

• curatenie: Ștergeți cu reclamăamp cloth for general cleaning. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
• Textilene Fabric: The breathable Textilene material is easy to clean. Simply wipe it down with a damp pânză.
• Powder-Coated Steel Frame: The powder-coated finish helps resist rust. Clean with a damp Evitați produsele de curățare abrazive sau substanțele chimice dure care ar putea deteriora finisajul.
• Blat de masă din sticlă: Curățați cu un detergent standard pentru geamuri și o lavetă moale.
• Depozitare sezonieră: During harsh weather conditions (heavy rain, snow, extreme cold), it is recommended to store the furniture indoors or cover it with a protective outdoor furniture cover to prevent damage and prolong its lifespan.
• Inspecție regulată: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability and safety.

Depanare

Dacă întâmpinați probleme în timpul asamblării sau utilizării, consultați următoarele soluții comune:

• Masă/scaune instabile: Ensure all bolts are fully and evenly tightened. Sometimes, loosening all bolts slightly, placing the furniture on a flat surface, and then tightening them in a cross-pattern can help level the unit. Check that all protective feet are properly installed.
• Dificultate la alinierea găurilor: Do not fully tighten any bolts until all components are loosely assembled. This allows for minor adjustments. If a hole is severely misaligned, check if a part is oriented incorrectly.
• Piese lipsă sau deteriorate: If any parts are missing or damaged upon arrival, do not proceed with assembly. Contact Flamaker customer support immediately for assistance.
• Zgârieturi pe podea: The chairs feature a bending design for easy movement. Ensure you lift the chairs rather than dragging them to prevent scratches on your floor or patio surface.

Specificații

Image: Dimensions of the Flamaker 4-Piece Outdoor Patio Bistro Set components.

Garanție și suport

For warranty information, please refer to the documentation included with your product packaging or contact Flamaker customer support directly. Flamaker offers various protection plans for extended coverage, which can be found on the product's purchase page.

If you require assistance with assembly, missing parts, or have any questions regarding your Flamaker 4-Piece Outdoor Patio Bistro Set, please contact Flamaker customer service. You can often find contact details on the manufacturer's website-ul web sau prin intermediul distribuitorului dumneavoastră.

For additional product information and to explore other Flamaker products, visit the official Flamaker Store online.