Introducere
Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.
Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.
Informații de siguranță
Vă rugăm să respectați următoarele măsuri de siguranță în timpul instalării și utilizării:
- AVERTIZARE: Risc de electrocutare. Deconectați alimentarea la siguranța sau întrerupătorul de circuit înainte de instalare sau service.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances.
- Asigurați voltage is compatible with the fixture's requirements (100-277V AC).
- Nu manipulați dispozitivul cu mâinile ude sau când stați pe suprafețe ude sau uscate.amp suprafete.
- This fixture is designed for outdoor use and is IP65 rated for wet locations.
- Do not attempt to modify or disassemble the fixture beyond what is described in this manual.
Conținutul pachetului
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
- Photocell (pre-installed)
- Non-photocell cover (for disabling photocell function)
- Elemente de montare (șuruburi, piulițe de sârmă)
- Manual de instructiuni
Caracteristicile produsului
- Eficient energetic: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
- Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
- Cap reglabil: Fixture angle can be adjusted 0-90 degrees for precise light direction.
- Construcție durabilă: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
- Durata de viata lunga: Maintenance-free LEDs with 50,000 hours of life.
Configurare și instalare
Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.
1. Montarea dispozitivului de fixare
- Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
- Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
- Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.
Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.
2. Conexiuni de cablare
- Connect the fixture's black wire to the supply's live/hot wire.
- Connect the fixture's white wire to the supply's neutral wire.
- Connect the fixture's green/ground wire to the supply's ground wire.
- Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
- Introduceți cu grijă toate firele în cutia de joncțiune.
3. Securing the Fixture
- Attach the fixture body to the mounted plate, ensuring it is securely hinged.
- Close the fixture and tighten any securing screws to ensure a watertight seal.
Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.
4. Photocell Configuration (Optional)
The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.
- To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
- Pull out the existing photocell.
- Screw in the non-photocell cover into the opening.
- Reasamblați lamp locuințe.
Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.
Instrucțiuni de operare
Funcționarea fotocelulelor
If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.
Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.
Reglarea capului luminii
The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.
Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.
Întreţinere
The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.
- curatenie: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp Nu utilizați substanțe de curățare abrazive sau solvenți, deoarece acestea pot deteriora finisajul sau lentila.
- Inspecţie: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- LED-urile sunt integrate și nu pot fi înlocuite de utilizator.
Depanare
If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde | Fără alimentare Cablaj defect Photocell malfunction (if installed) | Verificați întrerupătorul de circuit și conexiunile de alimentare. Verificați dacă conexiunile cablurilor sunt sigure. Ensure photocell is not obstructed or try replacing it with the non-photocell cover to test. |
| Lumina rămâne aprinsă în timpul zilei | Photocell obstructed or receiving insufficient light Funcționarea defectuoasă a fotocelulei | Clear any obstructions from the photocell. Ensure it is exposed to natural daylight. Test with the non-photocell cover. |
| Lumina pâlpâie | Conexiunea cablajului slab Voltagfluctuațiile | Verificați și asigurați toate conexiunile cablajului. Consult a qualified electrician to check power supply stability. |
Specificații
Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.
| Atribut | Valoare |
|---|---|
| Marca | DAKASON |
| Numărul de model | WP-30D-50 |
| Wattage | 30 wați |
| Luminozitate | 3300 lumeni |
| Temperatura de culoare | 5000 Kelvin (alb rece) |
| Voltage | 100-277 volți (CA) |
| Material | Die-cast Aluminum, Tempered Glass |
| Dimensiuni (L x l x H) | 6.6 cm x 7.9 cm x 4.3 cm |
| Greutatea articolului | 4 lire sterline |
| Evaluare IP | IP65 (impermeabil) |
| Caracteristici speciale | Dusk-to-Dawn Photocell, Adjustable Head, Full Cut-Off, Instant On, Not Dimmable, Shatter Resistant |
| Certificari | Listat ETL |
| UPC | 766832159971 |
Informații despre garanție
This DAKASON LED Wall Pack comes with a 5 an garanție. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.
Asistență pentru clienți
For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.