FABER T-Light Island Hood Instruction Manual

1. Informații importante privind siguranța

Read all instructions carefully before installing or using this appliance. Keep this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or injury.

• Ensure the electrical supply matches the rating plate on the hood.
• Instalarea trebuie efectuată de către un tehnician calificat, în conformitate cu reglementările locale.
• Nu flambați sub hota.
• Curățați în mod regulat filtrele de grăsime pentru a preveni pericolele de incendiu.
• Acest aparat nu este destinat utilizării de către persoane (inclusiv copii) cu capacități fizice, senzoriale sau mentale reduse sau cu lipsă de experiență și cunoștințe, cu excepția cazului în care acestea au fost supravegheate sau instruite cu privire la utilizarea aparatului de către o persoană responsabilă pentru siguranța lor.

2. Produs terminatview

The FABER T-Light Island Hood is designed for efficient air extraction and filtration in your kitchen. It features a sleek stainless steel finish, LED lighting, and touch controls for ease of use.

Figura 1: Față view of the FABER T-Light Island Hood, showcasinfinisajul său din oțel inoxidabil și panoul de control.

Figure 2: The FABER T-Light Island Hood integrated into a kitchen environment, demonstrating its island mounting type.

3. Configurare și instalare

This island hood is designed for ceiling mounting above a cooking surface. Proper installation is crucial for optimal performance and safety.

3.1 Despachetarea

Carefully remove the hood from its packaging. Check for any damage during transit. Retain packaging materials for potential future transport or service.

3.2 Montare

The hood is designed for island installation. Ensure the ceiling structure can support the weight of the hood (approximately 16 kg). Maintain the recommended distance between the cooking surface and the hood as per local building codes and the hood's specifications.

Figure 3: Technical drawing illustrating the dimensions (in mm) for installation, including width (998 mm), depth (598 mm), and adjustable height (Min. 705 - Max. 1000 mm).

3.3 Conexiune electrică

Connect the hood to a 240V electrical supply. All electrical connections must comply with local regulations and be performed by a qualified electrician.

3.4 Conducte

Connect the air outlet to a suitable ducting system. The hood has an air outlet diameter of 150/120 mm. Ensure the ducting is as short and straight as possible to maximize airflow efficiency.

4. Instrucțiuni de utilizare

The FABER T-Light Island Hood features intuitive touch controls for easy operation.

4.1 Pornire/Oprire

Press the power symbol on the Squarcle Touch control panel to turn the hood on or off.

4.2 Reglarea vitezei ventilatorului

Use the '+' and '-' symbols on the touch panel to increase or decrease the fan speed. The hood offers multiple speed settings to suit different cooking needs, with a maximum airflow of 690 m³/h.

4.3 Controlul luminii

Press the light symbol to activate the perimeter LED lighting. Press again to turn off the lights. The LED lighting provides efficient illumination of your cooking area.

5. Întreținere

Regular maintenance ensures the longevity and optimal performance of your hood.

5.1 Curățarea filtrelor de grăsime

The hood is equipped with self-supporting, dishwasher-safe grease filters. These filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to maintain effective grease capture and prevent fire hazards.

1. Turn off the power supply to the hood.
2. Carefully remove the grease filters.
3. Wash the filters by hand with hot soapy water or place them in a dishwasher on a low-temperature cycle.
4. Asigurați-vă că filtrele sunt complet uscate înainte de a le reinstala.

5.2 Curățarea suprafeței hotei

Clean the stainless steel surfaces with a soft cloth and a non-abrasive cleaner specifically designed for stainless steel. Avoid using abrasive pads or harsh chemicals that could damage the finish.

6. Depanare

If you encounter issues with your hood, refer to the following common problems and solutions:

• Hota nu pornește: Check the power supply and ensure the hood is properly plugged in. Verify the circuit breaker has not tripped.
• Putere redusă de aspirare: Clean or replace the grease filters. Check for obstructions in the ducting system. Ensure the ducting is correctly installed and not kinked.
• Zgomot excesiv: Ensure the hood is securely mounted. Check for loose components or obstructions in the fan. Verify the ducting is properly sealed and free of leaks.
• Luminile nu funcționează: Check if the LED lights are properly connected. If individual LEDs are out, contact customer support for replacement.

For problems not listed here, or if the issue persists, contact FABER customer support.

7. Specificații

Figure 4: Energy label for the FABER T-Light Island Hood, indicating an energy class A rating and a noise level of 65 dB (note: 50 dB is likely the minimum, 65 dB max).

8. Garanție și asistență

Information regarding product warranty and customer support is not provided within this document. Please refer to the separate warranty card included with your product or visit the official FABER webpentru detalii despre acoperirea garanției, centrele de service și asistența tehnică.