Lepro Industrial LED Desk Lamp

Introducere

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Acest versatil lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Please read this manual thoroughly before installation and operation, and retain it for future reference.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Instrucțiuni de siguranță

• Citiți cu atenție toate instrucțiunile înainte de a utilizaamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Folosiți doar becuri cu soclu E27 cu o putere maximătage de 40W.
• Nu folosiți lamp cu un cablu de alimentare sau ștecher deteriorat.
• This product is intended for indoor use only. Do not expose to water or high humidity.
• Păstrați lamp departe de materiale inflamabile.
• Nu încercați să dezasamblați sau să reparați lamp Contactați personal calificat pentru service.

Conținutul pachetului

Vă rugăm să verificați pachetul pentru următoarele articole:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Manual de utilizare

Note: The E27 bulb is not included and must be purchased separately.

Configurare și instalare

Follow these steps to assemble and install your desk lamp:

1. Atașați clamp: Fixați bine clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Asamblați Lamp Cap: Instalați lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: Introduceți cu grijă lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Instalați becul: Asigurați-vă că lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp priză. Nu strângeți prea tare.
5. Conectare la alimentare: Conectați lampConectați cablul de alimentare la o priză electrică adecvată.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Imagine: L-ulamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Instrucțiuni de operare

Pornire/Oprire: Locate the rocker switch on the power cord. Press the switch to turn the lamp pornit sau oprit.

Reglarea unghiului de lumină: Lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Imagine: L-ulamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Întreţinere

curatenie: Pentru a curăța lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Înlocuire bec: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp înapoi înăuntru.

Depanare

• Lamp nu pornește:
  • Verificați dacă cablul de alimentare este bine conectat la priză.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Verificați priza conectând un alt dispozitiv.
• Lumina pâlpâie:
  • Asigurați-vă că becul este înșurubat strâns.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Verificați dacă există conexiuni slăbite în cablul de alimentare sau în priză.
• Lamp is unstable:
  • Asigurați clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Verificați dacă lamp arm is properly inserted into the clamp comun.

Specificații

Image: Product dimensions and key features like E27 bulb base and power cord length.

Garanție și suport

Garantie: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Asistență clienți: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.