BONTEC Portable Mobile Standing Laptop Desk MWS-001BK Instruction Manual

Introducere

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your BONTEC Portable Mobile Standing Laptop Desk, Model MWS-001BK. Please read this manual thoroughly before use to ensure proper function and safety.

Informații de siguranță

• Asigurați-vă că toate componentele sunt prezente și nedeteriorate înainte de asamblare.
• Do not exceed the maximum weight capacity: Main desktop 44 lbs (20 kg), Secondary shelf 22 lbs (10 kg).
• Țineți copiii și animalele de companie departe în timpul asamblarii.
• Strângeți ferm toate șuruburile, dar nu le strângeți prea tare.
• Utilizați pe o suprafață plană, stabilă.
• Lock casters when the desk is in a stationary position.

Conținutul pachetului

Verificați dacă toate piesele sunt incluse în pachet:

• Desktop principal
• Secondary Shelf
• Vertical Support Columns (2)
• Baza cu rotile
• Assembly Hardware (screws, wrenches, etc.)

Dacă vreo piesă lipsește sau este deteriorată, vă rugăm să contactați asistența pentru clienți.

Configurare și asamblare

Follow these steps to assemble your BONTEC Portable Mobile Standing Laptop Desk. It is recommended to have a clear, open space for assembly.

Step 1: Attach Casters to the Base

Secure the four smooth-rolling casters to the base of the desk. Ensure two of the casters are lockable and positioned for easy access.

Descrierea imaginii: Un plin view of the assembled BONTEC portable mobile standing laptop desk, highlighting its casters at the base. The main desktop is tilted, holding a laptop, and the secondary shelf holds a cup and pen.

Step 2: Assemble Vertical Support Columns

Connect the vertical support columns to the base. Ensure they are securely fastened using the provided hardware.

Step 3: Attach Secondary Shelf

Mount the secondary shelf to the vertical support columns at your desired height. This shelf provides additional space for accessories.

Descrierea imaginii: An illustration demonstrating the full dynamic motion of the desk, including the 0-40 degree tilt of the main desktop and the height adjustment mechanism of the entire desk.

Step 4: Install Main Desktop

Attach the main desktop to the top of the vertical support columns. This desktop features a tilt mechanism and an anti-slip stopper.

Descrierea imaginii: A închide views of the desk's features: a hand wiping a waterproof surface, non-slip pads on the desktop, and hand screws used for height adjustments.

Pasul 5: Verificări finale

Once assembled, ensure all screws are tight and the desk is stable. Test the height adjustment and tilt mechanisms.

Instrucțiuni de operare

Reglarea înălțimii

The desk's height can be adjusted from 40.5 to 49 inches (103 to 125 cm). To adjust the height, loosen the hand screws on the vertical support columns, raise or lower the desktop to the desired position, and then firmly tighten the hand screws to secure it.

Descrierea imaginii: A split image showing a person comfortably using the BONTEC desk while sitting on a stool and then standing, demonstrating the desk's sit-stand functionality.

Desktop Tilt Adjustment

The main desktop can be tilted from 0 to 40 degrees. To adjust the tilt, loosen the knob located on the side of the desktop support, set the desktop to the desired angle, and then tighten the knob to lock it in place. The integrated anti-slip stopper will prevent items from sliding off.

Mobility and Locking Casters

The desk is equipped with four smooth-rolling casters for easy movement. To move the desk, unlock the casters. Once the desk is in the desired position, press down on the locking mechanism on two of the casters to secure the desk in place.

Descrierea imaginii: A close-up illustration of the desk's casters, showing their 360-degree rotation capability and the locking mechanism for stability.

Using the Secondary Shelf

The secondary shelf provides additional storage for items such as cups, pens, or small documents. Ensure items placed on this shelf do not exceed its weight capacity of 22 lbs (10 kg).

Întreţinere

• curatenie: Ștergeți suprafețele cu un material moale, damp cloth. Avoid abrasive cleaners. The desktop surface is scratch-resistant and waterproof for easy cleaning.
• Elemente de fixare: Verificați periodic toate șuruburile și bolțurile pentru a vă asigura că rămân strânse. Strângeți-le din nou dacă este necesar pentru a menține stabilitatea.
• Role Păstrați roțile fără resturi pentru a asigura o rulare lină.
• Depozitare: Store the desk in a dry environment away from extreme temperatures.

Depanare

Specificații

• Model: MWS-001BK
• Marca: BONTEC
• Dimensiuni produs: 24.41 x 15.75 x 49.21 inchi (62 x 40 x 125 cm)
• Greutatea articolului: 32.6 lire (14.8 kg)
• Main Desktop Capacity: 44 lbs (20 kg)
• Secondary Shelf Capacity: 22 lbs (10 kg)
• Interval de reglare a înălțimii: 40.5 până la 49 inchi (103 până la 125 cm)
• Desktop Tilt Range: 0 până la 40 de grade
• Material: Alloy Steel, MDF
• Culoare: Negru
• Role 4 universal mute wheels, 2 lockable

Descrierea imaginii: A diagram illustrating the key dimensions of the BONTEC desk, including height, width, depth, and the dimensions of both the main desktop and the secondary shelf, along with their respective weight capacities.

Informații despre garanție

BONTEC products are designed and manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official BONTEC webPăstrați bonul fiscal ca dovadă a achiziției pentru reclamații în garanție.

Asistență pentru clienți

If you have any questions, require assistance, or encounter issues with your BONTEC Portable Mobile Standing Laptop Desk, please contact BONTEC customer support:

• Website: Visit the BONTEC Store on Amazon (pentru întrebări generale și informații despre produse)
• Refer to your product packaging for direct contact information (email/phone).