DIODE LED SWITCHEX DI-24V-SE-100W Instruction Manual

1. Introducere

The SWITCHEX Dimmer + Driver is an innovative solution that combines an LED dimmer switch and an LED power supply into a single, integrated unit. Designed for convenience and efficiency, this device accepts standard 120 VAC input and converts it to low voltage DC, all while fitting within a standard electrical box. It supports power options up to 100W, representing a significant advancement in the power and control of LED lighting applications. This integrated unit simplifies installations by providing both dimming control and power conversion in one compact device, eliminating common compatibility issues between separate drivers and switches. Each SWITCHEX unit includes three interchangeable face plate colors: glossy white, glossy light almond, and glossy brown, allowing for seamless integration with various interior decors.

2. Caracteristicile produsului

• 100W Load Capacity: Supports up to 100W for 24V LED products, with a 120V input.
• Interchangeable Finishes: Comes with glossy white, glossy dark brown, and glossy light almond finishes to match various decors.
• Superior LED Dimming: Provides smooth dimming performance from 100% down to 5%.
• Preset Dimmer with On/Off Switch: Features a convenient preset dimmer function combined with an on/off switch for easy operation.
• Eliminates Compatibility Issues: Integrates the driver and switch into one unit, resolving common compatibility problems between separate components.

3. Conținutul pachetului

Vă rugăm să verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

• SWITCHEX Dimmer + Driver Unit (DI-24V-SE-100W)
• Glossy White Face Plate
• Glossy Light Almond Face Plate
• Glossy Brown Face Plate
• Șuruburi de instalare

Image: The three included interchangeable face plates (white, light almond, and brown) for the SWITCHEX unit, allowing customization to match your decor.

4. Informații de siguranță

AVERTIZARE: To avoid fire, shock, or death; turn off power at circuit breaker or fuse and test that power is off before wiring! This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician perform the installation.

• Do not use with non-dimmable LED fixtures or incandescent/fluorescent lights.
• Asigurați puterea totalătage of connected LED fixtures does not exceed 100W.
• Funcționează numai în limita volumului specificattage range (120 VAC input).
• Nu încercați să reparați sau să modificați dispozitivul. Apelați la personal calificat pentru toate lucrările de service.
• A se ține departe de apă și umiditate.

5. Configurare și instalare

The SWITCHEX unit is designed to fit into a standard single-gang electrical box. Follow these steps for proper installation:

1. Opriți alimentarea: Locate the circuit breaker controlling the light fixture or outlet where you intend to install the SWITCHEX. Turn off the power completely at the main electrical panel. Verify power is off using a voltage tester.
2. Pregătirea cablajului: Remove the existing switch or cover plate from the electrical box. Carefully pull out the existing wiring.
3. Conexiuni prin cablu:
   • Conectați black (line) wire from the electrical box to the fir negru on the SWITCHEX unit.
   • Conectați fir alb (neutru) from the electrical box to the fir alb on the SWITCHEX unit.
   • Conectați green (ground) wire from the electrical box to the fir verde on the SWITCHEX unit.
   • Conectați vol. scăzuttage output wires (typically red/black or positive/negative) from the SWITCHEX unit to your 24V LED lighting fixture. Ensure correct polarity.
4. Montați unitatea: Carefully fold the wires and push the SWITCHEX unit into the electrical box. Secure it using the provided mounting screws.
5. Attach Face Plate: Choose your desired face plate (white, light almond, or brown) and snap it onto the SWITCHEX unit. Secure it with the small screws if applicable (trim plate not included).
6. Restabiliți puterea: Reporniți alimentarea la întrerupător.

Image: The SWITCHEX unit, demonstrating its compact design for in-wall installation, integrating both the LED driver and dimmer switch.

6. Instrucțiuni de utilizare

The SWITCHEX unit provides intuitive control over your LED lighting:

• Control pornit/oprit: Press the bottom portion of the rocker switch to turn the lights ON or OFF.
• Control reglaj: Use the vertical slider on the right side of the switch to adjust the brightness level. Slide up to increase brightness and slide down to decrease brightness.
• Preset Dimming: The dimmer will return to the last set brightness level when turned back on, if not fully off.

7. Întreținere

The SWITCHEX Dimmer + Driver is designed for long-term, maintenance-free operation. Follow these simple guidelines:

• curatenie: To clean the surface of the switch, gently wipe with a soft, damp Nu utilizați produse de curățare abrazive, solvenți sau substanțe chimice dure, deoarece acestea pot deteriora finisajul.
• Fără piese reparabile de utilizator: There are no user-serviceable parts inside the unit. Do not attempt to open or repair the device.
• Conditii de mediu: Asigurați-vă că mediul de operare se încadrează în intervalele de temperatură și umiditate specificate pentru a preveni deteriorarea.

8. Depanare

If you experience issues with your SWITCHEX unit, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Diode LED customer support for further assistance.

9. Specificații

10. Garanție și asistență

For information regarding the product warranty, please refer to the official Diode LED website or contact their customer support directly. Diode LED is committed to providing high-quality products and excellent customer service.

Diode LED Customer Support:

• Pentru asistență tehnică, depanare sau reclamații în garanție, vă rugăm să vizitați Diode LED official website-ul or contact their support team through the contact information provided on their site.