VOX BC108 Black Cab Series AmpLiifier Cabinet

1. Introducere

The VOX BC108 Black Cab Series Amplifier Cabinet is a compact and portable speaker cabinet designed to deliver quality sound for guitar amplification. Featuring an 8-inch speaker and 25 Watts of power handling, it is ideal for practice, studio use, and small venues. This manual provides essential information for the safe and effective use of your BC108 cabinet, ensuring optimal performance and longevity.

Figura 1: Față view of the VOX BC108 Amplifier Cabinet.

2. Măsuri de siguranță

To prevent electric shock, fire, or damage to the unit, please read and follow all instructions carefully.

• Sursa de alimentare: This cabinet is passive and does not require direct power. Ensure any connected amplifier is properly grounded and uses the correct voltage.
• Ventilare: Do not block any ventilation openings. Ensure adequate airflow around the cabinet.
• Apă și umiditate: Do not expose the unit to rain, moisture, or excessive humidity. Do not place objects filled with liquids on or near the unit.
• Căldură: Țineți unitatea departe de surse de căldură, cum ar fi calorifere, registre de căldură, sobe sau alte aparate care produc căldură.
• curatenie: Curățați numai cu o cârpă uscată. Nu utilizați detergenți lichidi sau aerosoli.
• Service: Nu încercați să reparați singur acest produs. Consultați toate lucrările de service către personalul calificat de service.
• Plasare: Place the cabinet on a stable, level surface to prevent it from falling.
• Cabluri difuzoare: Use high-quality speaker cables with appropriate gauge for connections to prevent signal loss or damage.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• VOX BC108 AmpLiifier Cabinet
• Speaker Cable (may vary by region/retailer)
• Manual de instrucțiuni (acest document)

4. Configurare

Follow these steps to set up your VOX BC108 amplifier cabinet:

1. Plasare: Position the BC108 cabinet on a stable surface. For optimal sound projection, consider placing it on the floor or on a sturdy stand.
2. Conectarea la un Amplifier Head:

   Locate the speaker output jack on your amplifier head and one of the input jacks on the rear of the BC108 cabinet. Use a high-quality speaker cable to connect these two points. Ensure both the amplifier and the cabinet are powered off before making connections.

   

   Figure 2: The BC108 cabinet paired with an MV50 ampcap lifier.

   

   Figure 3: Rear panel of the BC108, illustrating the parallel speaker jacks.

3. Potrivirea impedanței: The BC108 has an impedance of 8 Ohms. Ensure your amplifier head's output impedance setting matches or is compatible with the cabinet's impedance to prevent damage to your ampmai în viață.
4. Parallel Speaker Jacks: The BC108 features two parallel speaker jacks. One jack serves as the input from your amplifier, and the other can be used to connect an additional speaker cabinet in parallel. When connecting two 8-Ohm cabinets in parallel, the total impedance presented to the amplifier will be 4 Ohms. Ensure your amplifier can safely operate at this lower impedance.

5. Funcționare

The BC108 is a passive speaker cabinet and its operation is directly controlled by the connected ampcap lifier.

• Pornire/Oprire: Porniți-vă amplifier head after all connections are securely made. Turn off the amplifier head before disconnecting any cables.
• Controlul volumului: Adjust the volume and tone settings directly on your ampcap lifier.
• Daisy-Chaining (Connecting Multiple Cabinets): If you wish to connect a second 8-Ohm cabinet, use a speaker cable to connect the second parallel jack on the BC108 to the input of the additional cabinet. Remember that this configuration will result in a 4-Ohm load for your ampmai în viață.


Figure 4: Two BC108 cabinets stacked, demonstrating a potential multi-cabinet setup.

6. Întreținere

Proper maintenance ensures the longevity and performance of your BC108 cabinet.

• curatenie: Wipe the exterior of the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish.
• Depozitare: When not in use for extended periods, store the cabinet in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
• Inspecţie: Verificați periodic cablurile difuzoarelor pentru a depista orice semne de uzură sau deteriorare. Înlocuiți imediat cablurile deteriorate.

7. Depanare

If you encounter issues with your BC108 cabinet, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact VOX customer support or a qualified service technician.

8. Specificații

9. Informații despre garanție

The VOX BC108 Amplifier Cabinet comes with a Garanție limitată de 1 an from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VOX website-ul.

10. Asistență pentru clienți

If you have any questions, require technical assistance, or need to arrange for service, please contact VOX customer support:

• Website: Visit the official VOX website pentru întrebări frecvente, resurse de asistență și informații de contact.
• Contact: Refer to the contact section on the VOX website pentru numere de telefon sau asistență prin e-mail.
• dealer: Contact your authorized VOX dealer for local support and service options.