AIBOO YK-300000197

AIBOO Linkable Under Cabinet LED Lighting System User Manual

Model: YK-300000197

1. Introducere

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. Informații importante privind siguranța

Siguranta electrica: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
No Wall Plug: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
Numai pentru utilizare în interior: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
Ventilare: Ensure adequate ventilation around the LED driver to prevent overheating.
Compatibilitate componente: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. Conținutul pachetului

Verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:

LED Puck Lights (6 units)
RF Wireless Remote Control (1 unit)
LED Controller (1 unit)
12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
5ft Extension Cords (2 units)
6-Way Splitter (1 unit)
Mounting Stickers (12 units)
Șuruburi de montare (12 unități)

Contents of the AIBOO Linkable Under Cabinet LED Lighting System package — **Figura 3.1: Conținutul pachetului.** This image displays all components included in the AIBOO Linkable Under Cabinet LED Lighting System: six puck lights, a remote, a controller, a 12V 1A adapter, two 5ft extension cords, a 6-way splitter, 12 stickers, and 12 screws.

4. Specificațiile produsului

Marca	AIBOO
Numărul de model	YK-300000197
Culoare deschisă	6000K alb lumina zilei
Material	Metal (Puck Light Housing), Plastic (Shade)
Puck Light Dimensions	0.31 cm L x 6 cm l x 0.8 cm
Sursa de alimentare	Electric cu fir (cu fir)
Voltage	12 Volts (DC output from driver)
Tip sursă de lumină	LED
Luminozitate	1200 Lumens (Total for 6 lights)
Caracteristici speciale	Dimmable, Linkable, Remote Control
Metoda de control	Telecomandă fără fir RF
UPC	712411875756

Dimensions of the AIBOO LED puck lights and associated components — **Figura 4.1: Dimensiunile produsului.** This image illustrates the dimensions of the puck lights (2.3 inches diameter, 0.3 inches thick), cable lengths, and controller/driver sizes for planning installation.

5. Configurare și instalare

Înainte de a începe instalarea, asigurați-vă că alimentarea principală cu energie a zonei de instalare este oprită de la întrerupătorul de circuit.

5.1 Schema de cablare de mai susview

Overall wiring diagram for the AIBOO Linkable Under Cabinet LED Lighting System — **Figure 5.1: System Wiring Overview.** This diagram shows the connection flow from the hardwired LED driver to the LED controller, and then to the individual puck lights.

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

Opriți alimentarea cu energie la întrerupătorul principal.
Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
Asigurați toate conexiunile cu conectori de cablu corespunzători.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 Conexiune în serie

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

Diagram showing puck lights connected in a series configuration — **Figure 5.2: Series Connection.** Lights are connected sequentially, one after another, from the LED controller.

Connect the LED controller to the output of the hardwired LED driver.
Connect the first puck light to the LED controller.
Connect the subsequent puck lights to each other using their integrated cables.
Use extension cords if additional length is required between lights.

5.3.2 Conexiune paralelă

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

Diagram showing puck lights connected in a parallel configuration using a 6-way splitter — **Figure 5.3: Parallel Connection.** Lights are connected to a central 6-way splitter, which then connects to the LED controller.

Connect the LED controller to the output of the hardwired LED driver.
Connect the 6-way splitter to the LED controller.
Connect individual puck lights to the available ports on the 6-way splitter.
Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

Pregătirea suprafeței: Asigurați-vă că suprafața de montare este curată, uscată și netedă.
Montare cu adeziv: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
Montare cu șuruburi: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. Instrucțiuni de utilizare

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 Funcții de control de la distanță

Diagram of the AIBOO remote control with button functions — **Figure 6.1: Remote Control Functions (New Version).** This image details the buttons on the remote control and their corresponding actions, including ON/OFF, brightness adjustment, pairing, and timer settings.

ON/OFF: Apăsați tasta ON buton pentru a aprinde luminile și OFF buton pentru a le opri.
Reglarea luminozității:
- Presa LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
- Utilizați 100%, 50%, 25% buttons for quick brightness presets.
Asociere: To pair the remote with the controller, press the Pereche button within 5 seconds of powering on the lights until the lights flicker.
Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Decodați button within 5 seconds of powering on the lights until the lights flicker.
Funcții de temporizare: Presa 1H, 2H, 4H, sau 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

Detailed instruction for the AIBOO remote control functions — **Figure 6.2: Remote Control Detailed Instructions.** This image provides a clear breakdown of each button's function on the remote, including ON/OFF, brightness adjustment, pairing, and timing settings.

Visual representation of 10 levels of adjustable brightness for AIBOO LED puck lights — **Figure 6.3: Adjustable Brightness.** This image demonstrates the range of 10 adjustable brightness levels, from dim to full brightness, controlled by the remote.

7. Întreținere

The AIBOO LED Lighting System requires minimal maintenance.

curatenie: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Inspecţie: Periodically check all connections for tightness and inspect cables for any signs of damage.
Înlocuire baterie: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8. Depanare

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

Problemă	Cauza posibila	Soluţie
Luminile nu se aprind.	No power to the LED driver; Remote control battery is dead; Remote not paired; Loose connections.	Check circuit breaker. Replace remote battery. Re-pair remote (see Section 6.1). Verify all cable connections are secure.
Lights are flickering or strobing.	Too many lights connected to a single power supply; Faulty power supply.	Ensure no more than 6 lights are connected to one power supply. If flickering persists, inspect the power supply for signs of damage (e.g., warped casing, discoloration). A damaged power supply may need replacement.
Telecomanda nu răspunde.	Remote control battery is dead; Remote is out of range; Remote is not paired with the controller.	Replace the CR2 battery in the remote. Move closer to the LED controller. Re-pair the remote with the controller (see Section 6.1).
Lights do not dim or respond to brightness controls.	Remote not paired correctly; Controller malfunction.	Re-pair the remote (see Section 6.1). If the issue persists, contact customer support.

9. Informații despre garanție

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO webPăstrați bonul fiscal ca dovadă a achiziției pentru orice reclamații în garanție.

10. Asistență pentru clienți

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

U.S. Live Customer Support: Luni - Vineri, 9:00 - 17:00 (EST)
Resurse online: Vizitați AIBOO Store on Amazon pentru informații suplimentare despre produs și asistență.

Illustration of customer support representatives with contact icons — **Figure 10.1: Customer Support.** This image represents the availability of customer support for assistance with product-related queries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.