BONTEC Single Arm Monitor Mount

BONTEC Single Arm Monitor Mount

Manual de utilizare

1. Introducere

Thank you for choosing the BONTEC Single Arm Monitor Mount. This product is designed to enhance your workspace by providing a stable, adjustable, and ergonomic solution for your monitor. It helps free up valuable desk space and allows for flexible screen positioning to reduce neck and back strain.

2. Informații de siguranță

  • Citiți cu atenție toate instrucțiunile înainte de asamblare și utilizare.
  • Ensure your monitor's weight and VESA pattern are within the specified limits (max 10 kg, VESA 75x75mm or 100x100mm).
  • Nu strângeți prea tare șuruburile, deoarece acest lucru poate provoca deteriorarea.
  • Păstrați piesele mici departe de copii.
  • Dacă vreo piesă lipsește sau este deteriorată, contactați imediat asistența pentru clienți.

3. Conținutul pachetului

Vă rugăm să verificați dacă toate componentele sunt prezente înainte de a începe asamblarea:

  • Ansamblu braț monitor
  • Birou Clamp Componentă
  • Componentă de bază Grommet
  • Elemente de montare (șuruburi, șaibe, distanțiere)
  • Allen Keys (Hex Wrenches)
  • Cleme de gestionare a cablurilor
  • Manual de instructiuni

4. Configurare și instalare

The BONTEC monitor mount offers two primary installation methods: Desk Clamp and Grommet Base. Choose the method that best suits your desk setup.

4.1. Birou Clamp Instalare

This method is suitable for desk thicknesses between 10mm and 85mm.

  1. Atașați C-clamp to the edge of your desk. Ensure the clamp is securely tightened to provide maximum stability.
  2. Introduceți polul principal în clamp base and secure it with the provided screw.
  3. Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.

4.2. Grommet Base Installation

This method is suitable for desks with a pre-existing bolt hole (diameter 10mm to 85mm) and desk thicknesses between 10mm and 80mm.

  1. Dezasamblați C-cl-ulamp to use the grommet base components.
  2. Insert the grommet bolt through the desk hole.
  3. Fixați baza inelului de fixare de sub birou folosind șaiba și piulița furnizate.
  4. Insert the main pole into the grommet base and secure it.
  5. Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.
Two installation methods: Desk Clamp și bază cu inele de etanșare
Figure 1: Illustration of the two available installation methods: Desk Clamp and Grommet Base. The Desk Clamp supports desk thicknesses from 10mm to 85mm. The Grommet Base supports desk thicknesses from 10mm to 80mm with a hole diameter from 10mm to 85mm.

4.3. Atașarea monitorului

This mount is compatible with monitors between 13 and 32 inches, with VESA mounting patterns of 75x75mm or 100x100mm, and weighing up to 10 kg.

  1. Carefully align your monitor's VESA holes with the mounting plate on the arm.
  2. Secure the monitor to the plate using the appropriate screws provided. Ensure they are tightened firmly but do not overtighten.
Monitor mounted on the BONTEC arm, showing screen size compatibility and weight capacity
Figure 2: A monitor securely mounted on the BONTEC arm, demonstrating compatibility with screens from 13 to 32 inches and a maximum capacity of 10 kg. The image also highlights VESA compatibility for 75x75mm and 100x100mm patterns.

5. Instrucțiuni de utilizare și reglaje

The BONTEC monitor mount offers a range of adjustments for optimal viewconfort.

5.1. Reglarea înălțimii

To adjust the monitor's height, loosen the screw on the pole collar, slide the arm to the desired position, and then re-tighten the screw firmly.

Adjustable height feature of the monitor arm, showing a range of 430mm
Figure 3: The monitor arm's adjustable height feature, illustrating the vertical movement range of up to 430mm along the main pole.

5.2. Reglarea înclinării

The monitor can be tilted up or down to reduce glare and optimize viewing angles. Loosen the tilt screw on the VESA plate, adjust the angle, and then re-tighten.

Full motion adjustment showing tilt and rotation capabilities
Figure 4: Demonstrates the full motion adjustment capabilities, including a tilt range of ±90° and 360° rotation for portrait or landscape orientation.

5.3. Swivel and Rotation

The arm allows for 180-degree swivel at multiple joints, and the VESA plate can rotate 360 degrees, enabling easy switching between landscape and portrait orientations.

Angle adjustment illustration showing 180 degree swivel at arm joints
Figure 5: An illustration detailing the angle adjustment, showing the arm's ability to swivel 180° at its joints for flexible positioning.

5.4. Gestionarea cablurilor

Utilize the integrated cable management clips along the arm to route and organize your power and AV cables, keeping your workspace neat and clutter-free.

Multiple features including integrated cable management and Allen key storage
Figure 6: Highlights multiple features of the monitor arm, including the integrated cable management system to keep wires organized and a convenient storage slot for the included Allen keys on the main pole.

6. Întreținere

  • Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că rămân strânse și fixate.
  • Curățați suportul cu o lavetă moale,amp Evitați utilizarea de produse de curățare abrazive sau solvenți.
  • Do not lubricate any parts of the mount unless specifically instructed.

7. Depanare

ProblemăCauza posibilaSoluţie
Monitor is wobbly or unstable.Mounting screws are loose; desk clamp/grommet base is not tight enough; monitor weight exceeds limit.Ensure all screws are tightened. Re-tighten the desk clamp or grommet base. Verify monitor weight is within 10 kg.
Difficulty adjusting arm movement.Îmbinările sunt prea strânse.Use the provided Allen keys to slightly loosen the screws at the arm joints until desired movement is achieved.
VESA plate does not align with monitor holes.Incorrect VESA pattern; plate installed backward.Verify your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the VESA plate is oriented correctly as per instructions.

8. Specificații

  • Marca: BONTEC
  • Culoare: Negru
  • Dispozitive compatibile: Monitors (LCD, LED)
  • Compatibilitate cu dimensiunea ecranului: 13-32 inches (33-81cm diagonal)
  • Compatibilitate VESA: 75x75mm, 100x100mm
  • Tip de montare: Desk Mount (Clamp sau Inel de fixare)
  • Caracteristica speciala: Reglabil (înălțime, înclinare, pivotare, rotație)
  • Material: Oțel aliat
  • Dimensiuni articol (L x l x H): 39 x 7.5 x 43 centimetri
  • Limită de greutate: 10 kilograme
  • Nivel de rezistență la apă: Nu este rezistent la apă

9. Garanție și asistență

BONTEC is committed to providing high-quality products and excellent customer service. This product is backed by technical support to assist you with any questions or concerns you may have during assembly or use.

For technical assistance or warranty inquiries, please refer to the contact information provided with your purchase or visit the official BONTEC website-ul.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.