Manual de instrucțiuni pentru becul LED TCP BR30, reglabil, 9W, 4100K

1. Produs terminatview

The TCP BR30 ENERGY STAR® qualified dimmable 9-watt LED bulb is designed to provide efficient and long-lasting illumination. This bulb generates light output comparable to many 65-watt halogen bulbs while consuming significantly less energy. It is engineered for environmental safety, containing no lead or mercury, which simplifies disposal.

This LED bulb boasts a very long operational life, rated to maintain at least 70% of its initial light output after 25,000 hours of use.

Image 1.1: The TCP BR30 LED Bulb, showcasing its standard BR30 shape and E26 screw base. The bulb is white with a frosted diffuser.

2. Informații importante privind siguranța

Please read and understand all instructions before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• AVERTIZARE: To avoid electric shock, always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
• Do not "hot swap" this bulb. Always turn off the fixture before replacing an existing bulb.
• Acest bec este not recommended for use in fully enclosed fixtures because heat buildup will shorten its operational life. Ensure adequate ventilation around the bulb.
• Potrivit pentru damp locații.
• Do not use with standard dimmers unless specifically rated for LED compatibility. Use only with dimmers designed for LED products to ensure proper performance and avoid damage.
• Nu dezasamblați și nu modificați becul. În interior nu există piese care pot fi reparate de utilizator.
• Asigurați-vă că becul este bine înșurubat în soclu.

3. Ghid de instalare

Follow these steps to properly install your TCP BR30 LED bulb:

1. Opriți alimentarea: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the circuit breaker or fuse box controlling the fixture.
2. Scoateți becul vechi: Deșurubați cu grijă becul existent de la dispozitivul de fixare. Lăsați-l să se răcească dacă a fost folosit recent.
3. Inspectați dispozitivul de fixare: Check the fixture socket for any damage or debris. Ensure it is clean and dry.
4. Instalați un bec nou: Gently screw the TCP BR30 LED bulb into the socket until it is finger-tight. Do not overtighten.
5. Restabiliți puterea: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch to test the new bulb.

4. Funcționare

This TCP BR30 LED bulb is designed for standard on/off operation and is fully dimmable. For optimal dimming performance, use with LED-compatible dimmers. Using non-LED compatible dimmers may result in flickering, reduced performance, or damage to the bulb.

The bulb provides a cool white light with a color temperature of 4100 Kelvin, suitable for various indoor applications.

5. Care and Disposal

curatenie: Asigurați-vă că alimentarea este oprită și că becul este răcit înainte de curățare. Ștergeți becul cu o cârpă moale și uscată. Nu utilizați agenți de curățare lichizi sau materiale abrazive.

Eliminare: This TCP LED bulb contains no lead or mercury, making it environmentally safer for disposal compared to traditional fluorescent bulbs. Please dispose of the bulb according to local regulations for electronic waste or general waste, as applicable in your region.

6. Depanarea problemelor comune

7. Specificatii tehnice

8. Garanție și asistență pentru clienți

For information regarding product warranty, returns, or technical assistance, please contact TCP customer support directly. Refer to the product packaging or the official TCP website-ul pentru cele mai recente date de contact și termeni de garanție.

Producător: TCP

Website: Visit the TCP Store on Amazon