C2G 40914 Compact Amplifier with External Volume Control User Manual

Introducere

The C2G 40914 Compact AmpLifierul este conceput pentru amplify dynamic microphone or stereo audio signals, providing 15 Watts of power per channel to a sound reinforcement system. This amplifier features a discreet installation and remote control capability via an included wall plate. It is suitable for various audio setups requiring compact amplification and external volume management.

Ce este în cutie

Vă rugăm să verificați dacă toate componentele sunt prezente înainte de a continua instalarea:

• Compact Ampmai în viață
• Decorator Volume Control Wall Plate
• Capac placă frontală
• Adaptor de alimentare
• Bracket Mounting Screws 6-32 (25mm) qty. 2
• Wall Plate Mounting Screw M3.5 (8mm) qty. 3
• Manual de utilizare

Produs terminatview

Familiarizați-vă cu amplifier and wall plate components.

Figura 1: Faţă view of the C2G 40914 Compact Amplifier. This image displays the local volume control knob, power indicator LED, 1/4 inch microphone input, 3.5mm auxiliary input, and input select switch.

Figura 2: Spate view of the C2G 40914 Compact Amplifier. Acest view shows the speaker output terminals (L+, L-, R+, R-), the remote volume control port (RJ45), and the DC 12V power input.

Figura 3: Decorator Volume Control Wall Plate and face plate cover. The wall plate features a rotary volume knob and a power indicator LED.

Figura 4: Spate view of the Decorator Volume Control Wall Plate, showing the RJ45 connector for remote communication with the ampmai în viață.

Înființat

1. Montarea Ampmai în viață:

   The amplifier includes a built-in mounting bracket. Secure the amplifier to a suitable surface using the provided 6-32 (25mm) mounting screws. Ensure adequate ventilation around the unit.

2. Conectarea difuzoarelor:

   Conectați boxele pasive la terminalele de ieșire pentru boxe din spatele sistemului. amplifier (L+, L-, R+, R-). Ensure correct polarity (+ to + and - to -) for each speaker channel. The amplifier provides 15 watts per channel.

3. Conectarea surselor audio:

   • Intrare microfon: Connect a dynamic microphone to the 1/4 inch MIC IN jack on the front panel.
   • Intrare auxiliara: Connect an audio source (e.g., smartphone, media player) to the 3.5mm AUX IN jack on the front panel.

4. Connecting the Remote Wall Plate:

   Install the Decorator Volume Control Wall Plate in a standard wall box. Connect a Cat5e/Cat6 cable (not included) from the RJ45 port on the rear of the wall plate to the REMOTE port (RJ45) on the rear of the amplifier. Secure the wall plate with the provided M3.5 (8mm) screws and attach the face plate cover.

5. Alimentarea Ampmai în viață:

   Connect the included power adapter to the DC 12V input on the rear of the amplifier, then plug the adapter into a standard AC power outlet. The power indicator LED on the amplifier and wall plate will illuminate.

Instrucțiuni de operare

1. Pornire/Oprire:

   The amplifier powers on automatically when connected to power. The power indicator LED on both the amplifier and the wall plate will light up.

2. Selectare intrare:

   Utilizați SELECTARE INTRARE switch on the front panel of the amplifier to choose between the MIC IN and AUX IN audio sources.

3. Controlul volumului:

   The amplifier offers both local and remote volume control options:

   • Local Volume: Adjust the rotary knob labeled VOLUM pe panoul frontal al ampmai în viață.
   • Remote Volume: Adjust the rotary knob labeled VOLUM on the Decorator Volume Control Wall Plate.

   Utilizați SELECTARE VOLUM porniți amplifier to determine whether the local or remote volume control is active. Set to 'LOCAL' to use the amplifier's knob, or 'REMOTE' to use the wall plate's knob.

4. Utilizarea microfonului:

   When MIC IN is selected, speak into the connected dynamic microphone. Adjust the volume using the selected volume control (local or remote) to achieve the desired output level.

Întreţinere

• Păstrați amplifier and wall plate clean by wiping with a soft, dry cloth.
• Avoid using liquid cleaners or aerosol sprays, which may damage the unit.
• Asigurați o ventilație adecvată în jurul ampliificator pentru a preveni supraîncălzirea.
• Nu expuneți unitatea la umiditate excesivă sau temperaturi extreme.

Depanare

If you encounter issues with your C2G 40914 Compact Amplifier, please refer to the following common solutions:

• Fără ieșire audio:

  • Ensure the power adapter is securely connected and the power indicator LEDs are lit.
  • Verify that speakers are correctly wired to the amplifier's output terminals with correct polarity.
  • Verificați dacă SELECTARE INTRARE switch is set to the correct source (MIC or AUX).
  • Confirmați că SELECTARE VOLUM switch is set to the active volume control (LOCAL or REMOTE) and that the volume knob is turned up.
  • Test with a different audio source or microphone to rule out source device issues.

• Remote Volume Control Not Working:

  • Ensure the Cat5e/Cat6 cable connecting the wall plate to the amplifier is securely plugged into both RJ45 ports.
  • Verificați că SELECTARE VOLUM porniți amplifier is set to 'REMOTE'.
  • Check the wall plate's power indicator LED to ensure it is receiving power.

• Audio distorsionat:

  • Reduce the volume level on both the amplifier/wall plate and the audio source device.
  • Asigurați-vă că impedanța difuzorului corespunde cu amplifier's requirements (typically 4-8 ohms).
  • Verificați toate conexiunile cablurilor pentru a vedea dacă sunt slăbite sau deteriorate.

Specificații

Garanție și suport

The C2G 40914 Compact Amplifier is thoroughly inspected and tested to ensure quality and comes with a warranty for your complete satisfaction. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official C2G website-ul.

For technical support, troubleshooting assistance, or further inquiries, please visit the C2G Store sau canalele lor oficiale de asistență.