1. Produs terminatview
The VIVOTEK AM-116 is a 20cm white pendant pipe designed to provide an extended and secure mounting solution for compatible VIVOTEK surveillance cameras. This accessory facilitates optimal camera positioning for various surveillance applications.
Image 1.1: VIVOTEK AM-116 Pendant Pipe. This image shows the white cylindrical pendant pipe, approximately 20cm in length, designed for camera mounting.
2. Conținutul pachetului
Verificați dacă toate articolele sunt prezente în pachet înainte de a continua instalarea.
- VIVOTEK AM-116 Pendant Pipe (1 piece, 20cm, White)
- Elemente de montare (șuruburi, ancore de perete)
- Ghid de instalare (acest document)
3. Informații de siguranță
Vă rugăm să citiți și să înțelegeți toate instrucțiunile de siguranță înainte de instalare și utilizare. Nerespectarea acestor instrucțiuni poate duce la vătămări corporale sau la deteriorarea produsului.
- Instalare profesională recomandată: For optimal safety and performance, installation by a qualified professional is recommended.
- Montare sigură: Ensure the mounting surface is capable of supporting the combined weight of the pendant pipe and the attached camera. Use appropriate mounting hardware for the specific surface material.
- Folosește instrumentele corecte: Folosiți întotdeauna uneltele corecte pentru instalare pentru a preveni deteriorarea produsului sau vătămările corporale.
- Evitați obstrucțiile: Do not install the pendant pipe in a location where it might obstruct emergency exits or pathways.
- Siguranta electrica: If connecting to a powered camera, ensure all electrical work is performed by a qualified electrician and complies with local electrical codes.
4. Configurare
Follow these steps for proper installation of the VIVOTEK AM-116 Pendant Pipe.
4.1 Mounting the Pendant Pipe
- Identificați locația de montare: Select a suitable, stable surface (e.g., ceiling, wall) that can securely hold the weight of the pendant pipe and the camera.
- Marcați găurile de foraj: Use the pendant pipe's mounting base as a template to mark the positions for drilling holes.
- Găuriți găuri pilot: Drill pilot holes of the appropriate size for the provided mounting screws and wall anchors (if necessary for the surface material).
- Secure Pendant Pipe: Attach the pendant pipe securely to the mounting surface using the provided screws. Ensure it is firmly fixed and does not wobble.
- Attach Compatible Device: Connect your compatible VIVOTEK camera (e.g., AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE) to the bottom of the pendant pipe according to the camera's specific installation instructions. Ensure all connections are tight and secure.
5. Operare
The VIVOTEK AM-116 Pendant Pipe is a passive mounting accessory. Once properly installed, its primary function is to provide a stable and extended platform for your compatible VIVOTEK surveillance camera. There are no active operational controls for the pendant pipe itself. The operation of the surveillance system will depend on the attached camera and its associated software.
6. Întreținere
Regular maintenance helps ensure the longevity and reliability of your pendant pipe.
- Inspecție vizuală: Periodically inspect the pendant pipe and its mounting points for any signs of damage, corrosion, or loosening.
- curatenie: If necessary, clean the exterior of the pendant pipe with a soft, damp Nu utilizați produse de curățare abrazive, solvenți sau substanțe chimice dure, deoarece acestea pot deteriora finisajul.
- Strângeți elementele de fixare: If any mounting screws appear loose, carefully re-tighten them to ensure the pipe remains securely fixed.
7. Depanare
This section addresses common issues related to the VIVOTEK AM-116 Pendant Pipe.
| Emisiune | Cauza posibila | Soluţie |
|---|---|---|
| Pendant pipe feels loose or wobbly after installation. | Mounting screws are not sufficiently tightened, or the mounting surface is inadequate. | Ensure all mounting screws are securely tightened. If the surface is weak, consider reinforcing it or choosing a different mounting location. |
| Camera cannot be attached to the pendant pipe. | Incompatibility with the camera model or incorrect attachment method. | Verify that your camera model is listed as compatible (e.g., AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE). Refer to the camera's manual for specific attachment instructions. |
| Visible damage to the pendant pipe. | Physical impact or environmental factors. | If the pipe is damaged, replace it immediately to prevent potential failure and damage to the attached camera. |
8. Specificații
Key technical specifications for the VIVOTEK AM-116 Pendant Pipe.
| Caracteristică | Detaliu |
|---|---|
| Model | AM-116 |
| Producător | VIVOTEK |
| Culoare | Alb |
| Lungime | 20 cm (aproximativ 7.87 inchi) |
| Dimensiuni pachet | 10.98 x 2.72 x 2.6 inci |
| Greutatea articolului | 1.06 lire sterline |
| ASIN | B01FRC2D2S |
| Dispozitive acceptate | AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE |
9. Informații despre garanție
The VIVOTEK AM-116 Pendant Pipe is covered by a standard manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official VIVOTEK website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați dovada achiziției pentru solicitările de garanție.
10. Suport
For technical assistance, product inquiries, or further support, please contact VIVOTEK customer service through their official channels:
- Oficial Website: Visit the VIVOTEK official website pentru resurse de asistență, întrebări frecvente și informații de contact.
- Serviciu clienți: Refer to the VIVOTEK website for regional contact numbers or email support.
