Introducere
The Phanteks Enthoo Evolv ATX Tempered Glass Edition computer case is designed to offer a premium building experience with a focus on aesthetics and functionality. It features sandblasted aluminum construction combined with tempered glass side panels, providing a clear view of internal components. This manual provides essential information for the setup, operation, and maintenance of your computer case.
Figura 1: Înclinat view of the Phanteks Enthoo Evolv ATX Tempered Glass Edition case.
Caracteristici cheie
- Construcție premium: Aluminum body (3mm thick) with left and right tempered glass side panels (4mm thick).
- Clean Interior Design: Hidden PSU and HDD compartments for a tidy build.
- Iluminare LED RGB: Integrated RGB LED lights with 10 colors and illumination effects (Breathing, Static, Color Cycle).
- Flux de aer optimizat: Direct airflow path to CPU and GPU. Includes three Phanteks premium fans (2x 140mm front, 1x 140mm rear).
- Advanced Cooling Support: Three installation areas for radiators, offset radiator bracket for memory clearance (120mm or 140mm form factor), reservoir mounting locations, and a pump bracket with vibration dampERS.
- Soluții de depozitare: Two Drop-N-Lock SSD brackets included. Three modular HDD brackets. Removable HDD cage for long PSUs (>180mm) or water pumps.
- Întreținere ușoară: Removable dust filters (front, bottom, top integrated) and quick-release panels for easy access.
- Clearance: Supports long GPUs up to 420mm (with modular bracket removed).
Ghid de instalare
1. Pregătirea cazului
Before installing components, ensure the case is placed on a stable, flat surface. Remove the tempered glass side panels by unscrewing the four thumb screws on each panel and carefully lifting them away. The front and top panels can also be removed for easier access during installation.
Figure 2: Case with tempered glass side panels removed for access.
Figure 3: Front panel removed, revealing the front fan mounts and dust filter.
Figure 4: Top panel removed, showing the removable radiator bracket.
2. Instalarea plăcii de bază
Install the I/O shield into the rear opening of the case. Align your ATX motherboard with the standoffs inside the case. Secure the motherboard using the provided screws. Ensure all necessary cables can reach their respective ports.
Figura 5: Interior view highlighting the motherboard tray and cable routing options.
3. Instalarea sursei de alimentare
The power supply unit (PSU) mounts at the bottom rear of the case. Slide the PSU into its designated compartment from the rear. Secure it with screws. If installing a long PSU, the modular HDD cage may need to be removed.
Figura 6: View of the PSU shroud and bottom compartment.
4. Instalarea unității
Carcasa acceptă mai multe unități de stocare:
- SSD-uri de 2.5": Utilize the two Drop-N-Lock SSD brackets located on the back of the motherboard tray.
- HDD-uri de 3.5": Install up to three 3.5" hard drives using the modular HDD brackets. These are typically located in the front-bottom section of the case.
Figure 7: Drop-N-Lock SSD brackets for 2.5-inch drives.
Figure 8: Modular HDD cage for 3.5-inch drives.
5. Instalare ventilator și radiator
The case comes pre-installed with three 140mm fans (two front, one rear). Additional fans or radiators can be installed:
- Faţă: Supports up to 3x 120mm or 2x 140mm fans/radiators.
- Top: Supports up to 3x 120mm or 2x 140mm fans/radiators. Use the removable radiator bracket for easier installation and to avoid memory conflicts.
- Spate: Supports 1x 120mm or 1x 140mm fan/radiator.
The integrated PWM hub allows for centralized fan control. Connect your case fans and CPU fan to this hub, then connect the hub to your motherboard's CPU fan header for synchronized fan speed control.
Figure 9: Removable top radiator bracket.
Figura 10: Example of water cooling component placement within the case.
6. Gestionarea cablurilor
Utilize the numerous cable routing cutouts and integrated Velcro straps on the back of the motherboard tray to manage cables. This ensures optimal airflow and a clean aesthetic.
Figura 11: Interiorul spate view with cable routing channels and Velcro straps.
7. Conexiuni I/O frontale
Connect the front panel USB 3.0, USB 2.0, audio, and power/reset switch cables to the corresponding headers on your motherboard. The case features 2x USB 3.0 and 2x USB 2.0 ports on the top front panel.
Figure 12: Top front I/O panel with USB 3.0, USB 2.0, and audio ports.
Instrucțiuni de operare
Control LED RGB
The case features integrated RGB LED lighting. The front panel LED can be controlled via a dedicated button on the top I/O panel or synchronized with compatible motherboard RGB software (e.g., ASUS Aura Sync, MSI Mystic Light) by connecting the appropriate cable from the case to your motherboard's RGB header. Cycle through 10 colors and various effects like Breathing, Static, and Color Cycle.
Întreţinere
Curățarea filtrului de praf
Regular cleaning of the dust filters is recommended to maintain optimal airflow and prevent dust buildup inside your system. The Enthoo Evolv ATX Tempered Glass Edition includes easily removable dust filters:
- Filtru frontal: Accessible after removing the front panel.
- Filtrul inferior: Slides out from the rear of the case.
- Filtrul superior: Integrated into the top panel, accessible when the top panel is removed.
To clean, simply slide out or remove the filters, gently brush off accumulated dust, or rinse with water if heavily soiled (ensure they are completely dry before reinstallation).
Figure 13: Removable bottom dust filter for easy cleaning.
Tempered Glass Panel Care
The tempered glass panels can be cleaned with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials or harsh chemicals that could scratch or damage the glass.
Depanare
- Sistemul nu pornește:
- Verificați toate conexiunile de alimentare, inclusiv cablurile de alimentare ATX cu 24 de pini, CPU cu 8 pini și GPU.
- Ensure the PSU switch is in the "On" position.
- Verify front panel power switch connections to the motherboard.
- Ventilatoarele nu se învârt:
- Confirm fan cables are securely connected to the motherboard or the PWM hub.
- Check BIOS settings for fan control.
- Luminile RGB nu funcționează:
- Ensure the RGB cable from the case is connected to the motherboard's RGB header (if using software control).
- Verify the dedicated RGB button on the case is functioning.
- Porturile USB nu funcționează:
- Check the internal USB 3.0 and USB 2.0 headers are correctly connected to the motherboard.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Numele modelului | Phanteks Enthoo Evolv ATX Computer Case |
| Numărul de model | PH-ES515ETG_GS |
| Tipul cazului | Turnul mijlociu ATX |
| Material | Aluminiu, Sticlă securizată |
| Dimensiuni (Lxlxh) | 19.5 x 9.25 x 20.1 inchi (495 x 235 x 510 mm) |
| Greutate | 29 lire (13.15 kg) |
| Compatibilitate cu placa de baza | E-ATX (up to 264mm wide), ATX, Micro ATX, Mini ITX |
| Sloturi de expansiune | 7 |
| Compartimente interne pentru unități de 3.5" | 3 (modular) |
| Compartimente interne pentru unități de 2.5" | 2 (Drop-N-Lock SSD brackets) |
| I/O față | 2x USB 3.0, 2x USB 2.0, Microphone, Headphone, RGB LED Control |
| Ventilatoare preinstalate | 2x 140mm (Front), 1x 140mm (Rear) |
| Suport ventilator (față) | 3x 120mm or 2x 140mm |
| Suport ventilator (sus) | 3x 120mm or 2x 140mm |
| Suport ventilator (spate) | 1x 120mm or 1x 140mm |
| Suport radiator (față) | Up to 360mm or 280mm |
| Suport radiator (sus) | Up to 360mm or 280mm |
| Suport radiator (spate) | 120 mm sau 140 mm |
| Clearance GPU | 420mm (without HDD cages), 300mm (with HDD cages) |
| Înălțimea răcitorului CPU | 194mm |
| Lungimea sursei de alimentare | 210mm (without HDD cages), 180mm (with HDD cages) |
Garanție și suport
For warranty information and technical support, please refer to the official Phanteks website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați dovada achiziției pentru solicitările de garanție.
Phanteks Official Website: www.phanteks.com