Introducere
This manual provides essential instructions for the safe and effective use, refilling, and maintenance of your Gibson Pipe Wrench Butane Lighter, Model 21253. Please read all instructions carefully before operating the lighter and retain this manual for future reference.
Informații de siguranță
- AVERTIZARE: Keep out of reach of children. This lighter features a child-resistant mechanism.
- Contains flammable butane gas under pressure. Do not puncture or incinerate container.
- Nu expuneți la căldură peste 49°C sau la lumina soarelui prelungită.
- Nu lăsați aprins mai mult de 30 secunde.
- Asigurați-vă că flacăra este stinsă după fiecare utilizare.
- Utilizați numai în zone bine ventilate.
- Nu încercați să reparați sau să modificați bricheta.
Setup: Refilling the Lighter
Your Gibson Pipe Wrench Lighter is refillable with standard butane gas. Use only high-quality butane fuel for optimal performance and longevity.
- A pregati: Turn the lighter upside down. Locate the refill valve at the bottom of the lighter.
- Bleed Air (Optional but Recommended): Before refilling, use a small tool (like a pen tip) to press the refill valve to release any residual air from the tank. This helps ensure a full refill.
- Reumplere: Firmly press the nozzle of the butane gas canister vertically into the refill valve. Hold for approximately 5-10 seconds. You may need to repeat this process 2-3 times to ensure a full tank.
- Așteaptă: After refilling, wait at least 2-3 minutes before attempting to ignite the lighter. This allows the gas to stabilize and reach room temperature.
Image: The Gibson Pipe Wrench Butane Lighter. This image displays the lighter's orange body, designed to resemble a pipe wrench, with a black adjustable wrench head and a black base. The lighter's design is both functional and decorative. The refill valve is located at the bottom of the black base.
Instrucțiuni de operare
- Aprindere: Hold the lighter with the wrench head facing upwards. Locate the ignition slider on the side of the wrench handle. Firmly push the slider upwards with your thumb until the flame ignites. Due to the child-resistant design, this action may require significant force.
- Reglați flacără: The flame height can be adjusted. Locate the flame adjustment screw, typically near the refill valve at the bottom. Use a small screwdriver or similar tool to turn it towards '+' for a larger flame or '-' for a smaller flame.
- A stinge: Release the ignition slider to extinguish the flame. Ensure the flame is completely out before storing.
Întreţinere
- curatenie: Periodically wipe the lighter with a soft, dry cloth to remove dust and grime. Do not use abrasive cleaners or solvents.
- Depozitare: Store the lighter in a cool, dry place, away from direct sunlight and heat sources. Ensure it is out of reach of children.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Bricheta nu se aprinde. | No fuel, air in tank, or ignition mechanism issue. | Refill with butane (see Setup). Bleed air from tank before refilling. Ensure ignition slider is pushed firmly. |
| Weak or inconsistent flame. | Low fuel, incorrect flame adjustment, or air in tank. | Refill with butane. Adjust flame height (see Operating). Bleed air from tank. |
| Ignition slider is hard to push. | Child-resistant mechanism. | This is normal for child-resistant lighters. Apply firm, consistent pressure upwards. |
Specificații
- Număr de model: 21253
- Marca: Gibson
- Tip de combustibil: Gaz petrolier lichefiat (butan)
- Caracteristici: Adjustable flame, Child resistant, Refillable
- UPC: 647150212534
Garanție și suport
For warranty information or technical support, please contact the manufacturer, Gibson, directly. Keep your purchase receipt as proof of purchase.
For further assistance, you may visit the manufacturer's official website-ul sau contactați departamentul de servicii pentru clienți.