1. Produs terminatview
The Tornado Electric Water Heater Model TEEE-30MW is designed to provide efficient and reliable hot water for your household needs. This 30-liter capacity water heater features a durable enameled inner tank, advanced safety mechanisms, and an intuitive LED indicator for heating status. Its compact design and robust construction ensure long-lasting performance.
Figura 1: Față view of the Tornado Electric Water Heater.
Caracteristici cheie:
- Capacitate: 30 litri
- Putere: 1500 wați
- Indicator LED: Illuminates during the water heating process.
- Rezervor interior: Enameled and anti-rust for extended durability.
- Caracteristici de siguranță: Equipped with an overheat sensor, dry heating sensor, and a non-return safety valve.
- Element de incalzire: Copper heating element with magnesium anodes for corrosion protection.
- Materialul corpului: Specially treated to resist water vapor and humidity.
- Panou de control: Convenient front-mounted control panel.
- Izolare: High-density insulating foam for energy efficiency.
- Repornire automată: Automatic restart function.
2. Configurare și instalare
Proper installation is crucial for the safe and efficient operation of your water heater. It is highly recommended that installation be performed by a qualified professional.
2.1 Mounting the Water Heater
- Select a suitable wall location capable of supporting the water heater's weight when full (approximately 45 kg for the 30-liter model).
- Mark the positions for the mounting brackets on the wall. Ensure the marks are level and correctly spaced according to the unit's dimensions.
- Drill holes and securely fasten the mounting brackets to the wall using appropriate hardware (not included).
- Carefully lift and hang the water heater onto the installed brackets, ensuring it is stable and level.
Figura 2: lateral view with mounting brackets and connections.
2.2 Conexiuni la apă
- Identify the cold water inlet (usually marked blue or with a blue ring) and the hot water outlet (usually marked red or with a red ring). Both connections are 1/2 G.
- Install the non-return safety valve on the cold water inlet pipe. This valve prevents water backflow and excessive pressure buildup.
- Connect the cold water supply line to the inlet and the hot water output line to the outlet. Use appropriate plumbing fittings and ensure all connections are watertight.
- Open the main water supply and check for any leaks. Allow the tank to fill completely before proceeding to electrical connection.
2.3 Conexiune electrică
- Ensure the water heater is properly grounded to prevent electrical hazards.
- Connect the water heater to a dedicated electrical circuit with appropriate voltage and current ratings (1500W).
- Verify that all electrical connections are secure and comply with local electrical codes.
3. Instrucțiuni de utilizare
Once installed and filled with water, your Tornado Electric Water Heater is ready for operation.
3.1 Pornirea și oprirea
- To turn on the water heater, ensure it is plugged into a suitable power outlet and the main power switch (if applicable) is in the 'ON' position.
- The 'Power On' indicator light will illuminate, indicating the unit is receiving power.
- To turn off the water heater, switch off the main power or unplug the unit.
Figure 3: Power On and Heating indicators.
3.2 Reglarea temperaturii
- The water heater features a temperature dial on the front panel, ranging from 'MIN' to 'MAX'.
- Rotate the dial to your desired temperature setting. Turning towards 'MAX' will increase the water temperature.
- The 'Heating' indicator light will illuminate when the water heater is actively heating water and will turn off once the set temperature is reached.
Figure 4: Temperature adjustment dial.
4. Întreținere
Întreținerea regulată asigură longevitatea și eficiența încălzitorului dumneavoastră de apă.
4.1 Curățare generală
- Periodically wipe the exterior of the water heater with a soft, damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
- Ensure the area around the water heater is kept clean and free from obstructions.
4.2 Inspecția și înlocuirea tijei anodice
- The water heater is equipped with magnesium anodes to protect the inner tank from corrosion.
- These anode rods should be inspected annually by a qualified technician and replaced if significantly depleted.
4.3 Golirea rezervorului
- If the water heater will be out of use for an extended period or in areas prone to freezing, the tank should be drained.
- Opriți alimentarea cu energie a încălzitorului de apă.
- Închideți robinetul de admisie a apei rece.
- Deschideți un robinet de apă caldă în casă pentru a reduce presiunea.
- Connect a hose to the drain valve at the bottom of the water heater and direct it to a suitable drain.
- Open the drain valve and allow all water to empty from the tank.
4.4 Safety Valve Check
- Periodically check the non-return safety valve for proper operation. Refer to the safety valve manufacturer's instructions for specific testing procedures.
5. Depanare
Înainte de a contacta serviciul clienți, vă rugăm să consultați următorul ghid de depanare pentru problemele comune.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Fara apa calda | Fără alimentare Termostatul setat prea jos Defecțiunea elementului de încălzire | Verificați conexiunea de alimentare și întrerupătorul de circuit Reglați termostatul la o setare mai mare Contactați tehnicianul de service |
| Apa caldă insuficientă | Termostatul setat prea jos High hot water demand Acumularea de sedimente în rezervor | Măriți setarea temperaturii Allow more time for reheating Drain and flush the tank (professional service recommended) |
| Apa este prea fierbinte | Termostatul este prea ridicat | Reduceți setarea temperaturii |
| Scurgere de apă | Conexiuni slabe Supapa de siguranță defectă Tank corrosion | Strângeți conexiunile Inspect and replace safety valve Contactați tehnicianul de service |
| Heating indicator not lighting up | Water already at set temperature Problemă cu elementul de încălzire | This is normal if water is hot enough Contactați tehnicianul de service |
Caracteristici de siguranță: The water heater is equipped with an overheat sensor and a dry heating sensor. If these sensors detect abnormal conditions, the heater may automatically shut off to prevent damage. If this occurs, turn off the power, wait for the unit to cool, and then restart. If the problem persists, contact customer support.
6. Specificațiile produsului
Detailed technical specifications for the Tornado Electric Water Heater Model TEEE-30MW.
Figura 5: Dimensiunile produsului.
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | TEEE-30MW |
| Capacitate | 30 litri |
| Putere electrică | 1500 wați |
| Culoare | Alb |
| Material rezervor interior | Enameled, Anti-rust |
| Caracteristici de siguranță | Overheat Sensor, Dry Heating Sensor, Non-return Safety Valve |
| Element de încălzire | Copper with Magnesium Anodes |
| Materialul corpului | Special treated material, resistant to water vapor and humidity |
| Izolare | Spumă de înaltă densitate |
| Intrare apă rece | 1/2 G |
| Priza de apa calda | 1/2 G |
| Dimensiuni (Îl x l x A) | 450 x 450 x 490 mm |
| Greutate netă | 15.6 kg |
| Greutate brută | 18.2 kg |
| Țara de origine | Egipt |
7. Garanție și asistență
7.1 Informații despre garanție
This Tornado Electric Water Heater Model TEEE-30MW comes with a 5-year full free warranty provided by the manufacturer/brand from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims.
7.2 Asistență pentru clienți
For any technical assistance, warranty claims, or further inquiries, please contact Tornado customer service. Refer to your product packaging or the manufacturer's official website pentru cele mai recente informații de contact.