D-Link DGS-1016C 16-Port Gigabit Unmanaged Ethernet Switch

Introducere

The D-Link DGS-1016C is a 16-port Gigabit unmanaged switch designed for small office/home office (SOHO) and small to medium-sized business (SMB) environments. It provides high-speed network connectivity with plug-and-play simplicity, requiring no complex configuration. This switch supports energy-efficient Ethernet (IEEE 802.3az) to reduce power consumption and optimize energy usage based on cable length and network traffic.

Caracteristici cheie:

• High-speed connections: Sixteen (16) Gigabit (10/100/1000) Ports for bandwidth-demanding networks.
• Plug-and-play installation: Easily set up your network without meticulous configuration.
• Energy-efficient: Saves energy and reduces power to Ports when there's no traffic.
• Intelligent power Optimization: Optimizes power usage for a port based on the length of cable connected to it.
• Solid, metal housing: Durable for rack mounting and lifetime use.
• Fanless design: Quiet operation that's ideal for office environments.
• Rack mountable: Mounts in standard 19" rack and sits on table tops.

Conținutul pachetului

Verificați dacă pachetul dvs. conține următoarele articole:

• DGS-1016C 16-Port Gigabit Unmanaged Switch
• Adaptor de alimentare
• Ghid de instalare rapidă (QIG)
• 2 Rackmount Brackets
• 8 șuruburi
• 4 picioare de cauciuc

If any of the above items are missing or damaged, please contact your local D-Link reseller for replacement.

Înființat

Înainte de a începe:

Ensure you have all the necessary components as listed in the "Package Contents" section. This switch is unmanaged, meaning it requires no software configuration for basic operation.

Instalare desktop:

1. Așezați comutatorul pe o suprafață plană și stabilă.
2. Atașați picioarele de cauciuc incluse în partea de jos a comutatorului pentru a preveni zgârieturile și a oferi stabilitate.
3. Connect your network devices (computers, servers, network printers, etc.) to any of the 16 Gigabit Ethernet ports using standard RJ-45 Ethernet cables.
4. Conectați adaptorul de alimentare la intrarea de alimentare a comutatorului și apoi la o priză de curent.

Instalare pe rack:

1. Atașați cele două suporturi de montare în rack pe părțile laterale ale switch-ului folosind șuruburile furnizate.
2. Fixați switch-ul într-un rack standard de 19 inch folosind șuruburile de rack corespunzătoare (nu sunt incluse).
3. Conectați dispozitivele de rețea la porturile Ethernet.
4. Conectați adaptorul de alimentare la intrarea de alimentare a comutatorului și apoi la o priză de curent.

Operarea comutatorului

The DGS-1016C is an unmanaged switch, meaning it operates automatically without the need for user configuration. Once powered on and connected to network devices, it will begin forwarding data.

Indicatoare LED:

The front panel of the switch features LED indicators for each port, providing visual status of network activity and connection speed.

• LED de alimentare: Indică starea de alimentare a comutatorului.
  • Pe: Comutatorul este pornit.
  • Off: Comutatorul este oprit sau nu primește curent.
• LED-uri Link/Act (per port): Indicates the connection status and activity for each port.
  • Solid Green (1000Mbps): A device is connected at Gigabit speed (1000 Mbps).
  • Solid Amber (10/100Mbps): A device is connected at 10 Mbps or 100 Mbps speed.
  • Clipește: Data is being transmitted or received on that port.
  • Off: No device is connected to the port, or the connected device is powered off.

Auto-negociere:

Each port on the DGS-1016C automatically detects the network speed (10, 100, or 1000 Mbps) and duplex mode (half or full) of the connected device and adjusts accordingly. This ensures optimal performance without manual configuration.

Ethernet eficient din punct de vedere energetic (EEE):

The switch supports IEEE 802.3az EEE, which automatically reduces power consumption during periods of low data activity. It also optimizes power usage based on the length of the connected Ethernet cable, further enhancing energy efficiency.

Întreţinere

The DGS-1016C is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:

• curatenie: Folosiți o lavetă moale și uscată pentru a curăța exteriorul comutatorului. Nu utilizați agenți de curățare lichizi sau cu aerosoli.
• Ventilare: Ensure that the ventilation openings on the switch are not blocked. Maintain adequate airflow around the device to prevent overheating.
• Mediu: Operate the switch within its specified environmental conditions (temperature and humidity) to prevent damage. Avoid placing it in direct sunlight or near heat sources.
• Putere: Use only the power adapter supplied with the switch. Disconnect power during electrical storms or when unused for long periods.

Depanare

If you encounter issues with your DGS-1016C switch, refer to the following common problems and solutions:

Fără putere:

• Asigurați-vă că adaptorul de alimentare este conectat corect la comutator și la o priză funcțională.
• Verify that the power outlet is active by plugging in another device.
• Check the power LED on the front panel; it should be illuminated.

Nicio legătură/activitate pe un port:

• Verificați dacă cablul Ethernet este conectat în siguranță atât la portul switch-ului, cât și la dispozitivul de rețea.
• Asigurați-vă că dispozitivul de rețea conectat este pornit și funcționează corect.
• Încercați să utilizați un alt cablu Ethernet pentru a exclude un cablu defect.
• Test the connection with a different port on the switch.
• Check the Link/Act LED for the specific port; it should be solid or flashing.

Viteză redusă a rețelei:

• Ensure all connected devices support Gigabit Ethernet (1000 Mbps) for optimal speed. The Link/Act LED should be green for Gigabit connections.
• Check for excessive network traffic or bandwidth-intensive applications running on connected devices.
• Verify the quality and length of your Ethernet cables. Cat5e or Cat6 cables are recommended for Gigabit speeds.

If these steps do not resolve your issue, please refer to the D-Link support website or contact D-Link technical support for further assistance.

Specificații

Garanție și suport tehnic

D-Link products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product or visit the official D-Link website-ul.

For technical support, product documentation, and software updates, please visit the D-Link support portal:

Asistență D-Link Website-ul

When contacting support, please have your product model number (DGS-1016C) and serial number ready.