Tunze 6040.000

Tunze Turbelle Nanostream 6040 DC Controllable Pump

Manual de instructiuni

Brand: Tunze | Model: 6040.000

1. Introducere

Thank you for choosing the Tunze Turbelle Nanostream 6040 DC Controllable Pump. This compact and powerful pump is designed to create optimal water movement in aquariums up to 120 gallons, ensuring a healthy environment for your aquatic inhabitants. Its controllable DC motor and included controller allow for precise adjustment of flow patterns and intensity.

2. Instrucțiuni de siguranță

  • Always disconnect the power supply before performing any maintenance or handling the pump.
  • Ensure your hands are dry before plugging in or unplugging the power supply.
  • Pompa este proiectată exclusiv pentru utilizare submersibilă. Nu o folosiți fără apă.
  • Do not modify the pump or its components. Use only original Tunze parts.
  • Nu lăsați cablul de alimentare și controlerul să intre în contact cu apa.
  • This product is intended for aquarium use only.

3. Conținutul pachetului

Verificați dacă toate componentele următoare sunt incluse în pachet:

  • Tunze Turbelle Nanostream 6040 DC Pump
  • controler 7090
  • Magnet Mount
  • Unitate de alimentare

4. Configurare

Follow these steps to set up your Tunze Turbelle Nanostream 6040 pump:

  1. Montarea pompei: Position the pump inside your aquarium at the desired location. Use the included magnet mount to secure the pump to the aquarium glass. Ensure the outer magnet is placed directly opposite the inner magnet on the exterior of the glass. The pump can be discreetly concealed behind rockwork.
  2. Conectarea controlerului: Connect the pump's cable to the designated port on the Controller 7090.
  3. Conectarea sursei de alimentare: Plug the power supply unit into the controller, then plug the power supply into a suitable electrical outlet.
  4. Plasarea inițială: For optimal water flow, place the pump in an area that allows for maximum circulation without disturbing the substrate excessively.
Tunze Turbelle Nanostream 6040 DC Controllable Pump with Controller and Magnet Mount

Image: Tunze Turbelle Nanostream 6040 DC Controllable Pump, showing the pump unit, controller, and magnet mount. The controller features adjustment knobs for various settings.

5. Funcționarea pompei

The Controller 7090 provides versatile control over your Nanostream 6040 pump:

  • Reglarea debitului: The controller features knobs to adjust the maximum speed, minimum speed, and the interval between these two settings. This allows for fine-tuning of water flow to suit your aquarium's needs.
  • Moduri de operare: The controller supports various modes, including constant flow, pulse mode (simulating natural wave action), and other functions for creating specific water movement patterns. Refer to the controller's specific instructions for detailed mode selection and programming.
  • Modul de hrănire: A dedicated feed timer button allows you to temporarily pause the pump for feeding, preventing food from being immediately drawn into filtration.

Experiment with the settings to find the ideal flow for your aquarium's inhabitants and aquascape.

6. Întreținere

Întreținerea regulată asigură longevitatea și performanța optimă a pompei dumneavoastră:

  • curatenie: Periodically remove the pump from the aquarium (after disconnecting power) and gently clean the impeller and pump housing. Use a soft brush to remove any algae, detritus, or calcium buildup. Do not use harsh chemicals.
  • Inspecția rotorului: Check the impeller for any signs of wear or damage. A worn impeller can lead to increased noise or reduced performance.
  • Verificarea cablului: Regularly inspect the power cable and connections for any signs of damage or fraying.
  • Suport cu magnet: Ensure the magnet mount is clean and free of debris to maintain a secure grip on the aquarium glass.

7. Depanare

ProblemăCauza posibilaSoluţie
Pompa nu funcționeazăNo power; disconnected cable; impeller jammed.Check power connection; ensure cables are securely plugged in; clean impeller.
Debit redusImpeller clogged; pump needs cleaning; incorrect controller setting.Clean pump and impeller; adjust controller settings.
Zgomot excesivImpeller dirty or damaged; air trapped in pump; improper mounting.Clean or replace impeller; gently shake pump to release air; re-position pump securely.

If you continue to experience issues, please contact Tunze customer support.

8. Specificații

CaracteristicăDetaliu
Numărul de model6040.000
Greutatea articolului1.65 lire (0.75 kg)
Dimensiunile produsului (Lxlxh)2.5 x 2.5 x 3.7 inchi (6.35 x 6.35 x 9.4 cm)
MaterialPlastic
CuloareNegru
ProducătorTunze USA LLC
Potrivit pentru acvariiUp to 120-Gallon

9. Garanție și asistență

Tunze products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Tunze website. For technical support or assistance with your Tunze Turbelle Nanostream 6040, please contact Tunze customer service through their official channels.

Puteți găsi mai multe informații și date de contact pe Tunze Store on Amazon.

© 2025 Tunze. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.