Frigidaire 316261900
Frigidaire 316261900 Range/Stove/Oven Surface Burner Cap Instruction Manual
Model: 316261900
Introducere
This manual provides essential information for the proper installation, use, and maintenance of your Frigidaire 316261900 Range/Stove/Oven Surface Burner Cap. Please read these instructions carefully before proceeding to ensure safe and efficient operation.
Produs terminatview
The Frigidaire 316261900 is a genuine replacement surface burner cap designed for Frigidaire range, stove, and oven cooktops. This component covers the burner head, helping to distribute the flame evenly and protect the burner from spills and debris. It is made of durable cast iron and is black in color.

Image: The Frigidaire 316261900 Surface Burner Cap, a black, circular component.
Informații de siguranță
- Always disconnect power to the appliance before attempting any installation or maintenance.
- Allow the cooktop and burner components to cool completely before handling.
- Purtați echipament individual de protecție adecvat, cum ar fi mănuși, dacă este necesar.
- Ensure the replacement part is compatible with your appliance model.
- Dacă nu sunteți sigur de vreun pas, consultați un tehnician calificat.
Configurare și instalare
This section outlines the steps for replacing an existing surface burner cap. Ensure the cooktop is cool and the appliance is disconnected from power before beginning.
- Pregătiți zona: Clear any cookware or debris from the cooktop surface.
- Îndepărtați capacul vechi (dacă este cazul): Carefully lift the old burner cap off the burner head. It should simply rest on top.
- Inspect Burner Head: Check the burner head for any food residue or blockages. Clean if necessary, ensuring the igniter is clear.
- Place New Cap: Position the new Frigidaire 316261900 burner cap directly over the burner head, ensuring it sits flat and centered. The cap should rest securely without wobbling.
- Funcționalitate de testare: Reconnect power to the appliance. Turn on the burner to a low setting to verify proper flame distribution and ignition. The flame should be even and blue.

Image: The Frigidaire 316261900 Surface Burner Cap held in a hand, showing its approximate dimensions (3.0 inches / 7 cm diameter).
Instrucțiuni de operare
The surface burner cap is an integral part of your cooktop's burner assembly. Once correctly installed, its operation is automatic with the use of the burner.
- Ensure the burner cap is always in place before operating the burner.
- The cap helps to direct the flame for efficient cooking and protects the burner head.
- Do not operate the burner without the cap, as this can lead to improper flame distribution and potential safety hazards.
Întreţinere
Regular cleaning of the burner cap helps maintain optimal performance and appearance.
- Curatenie zilnica: After the cooktop has cooled, wipe the burner cap with a damp cloth and mild detergent to remove food spills.
- Curațare profundă: For stubborn stains, the burner cap can be removed and soaked in warm, soapy water. Use a non-abrasive brush or sponge to gently scrub away residue.
- Uscare: Ensure the burner cap is completely dry before placing it back on the burner head. Moisture can interfere with ignition.
- Evitați abrazivi: Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish of the cap.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Uneven flame or poor ignition | Burner cap not seated correctly, or burner ports/igniter are dirty. | Ensure the cap is flat and centered. Clean the burner head and igniter thoroughly. |
| Cap appears discolored or damaged | Normal wear and tear, or exposure to excessive heat/harsh cleaning agents. | Clean as per maintenance instructions. If severely damaged, replacement may be necessary. |
| Cap wobbles | Improper seating or damage to the burner head. | Reseat the cap. Inspect the burner head for damage. |
Specificații
- Număr de model: 316261900
- Marca: Frigidaire
- Material: Fontă
- Culoare: Negru
- Greutatea articolului: Aproximativ 4 uncii (113 grame)
- Dimensiuni: Approximately 3.0 inches (7 cm) diameter
- Tip piesa: Surface Burner Cap
Garanție și suport
As a genuine Frigidaire replacement part, this burner cap is typically covered under the standard warranty terms for Frigidaire appliance parts. For specific warranty details, please refer to your appliance's original documentation or contact Frigidaire customer support directly.
Pentru asistență suplimentară sau pentru a achiziționa piese Frigidaire originale suplimentare, vă rugăm să vizitați site-ul oficial Frigidaire. website-ul sau contactați departamentul de servicii pentru clienți.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.