Manual de utilizare pentru controlerul generatorului ComAp AC03 InteliLite NT PRAMAC

1. Introducere

This manual provides essential information for the installation, operation, and maintenance of the ComAp AC03 InteliLite NT PRAMAC Generator Controller. This compact gen-set controller is designed for both manual and remote start (MRS) applications, offering comprehensive monitoring and protection for your generator set. Please read this manual thoroughly before installation and operation to ensure safe and correct usage.

2. Produs terminatview

2.1 Caracteristici cheie

• Compact design for gen-set operation.
• Supports Manual and Remote Start (MRS) applications.
• Full gen-set monitoring and protection.
• Connectivity for up to 8 engine gauges.
• True RMS voltage și măsurarea curentului.
• 3-phase measurement capabilities.
• 3 configurable analog inputs.
• Magnetic pickup input.
• Terminal D+ pre-excitation.
• 6 binary inputs and 6 binary outputs.
• Automatic Generator Circuit Breaker (GCB) control.
• Records operating hours and performance logs.
• Supports plug-in extension modules.
• Automatic SMS alarm functionality.
• Online control and monitoring via embedded web server (IB-Lite).
• Optional GSM/GPRS/Wireless Internet modem (IL-NT GPRS).
• User-changeable dual language support.

2.2 Components and Interface

Figura 1: Front panel of the ComAp AC03 InteliLite NT PRAMAC Generator Controller. This view shows the display screen, mode buttons, start/stop buttons, fuel pump, fault reset, page navigation, and arrow keys for user interaction.

Figura 2: Rear panel of the ComAp AC03 InteliLite NT PRAMAC Generator Controller, illustrating the various connection terminals for generator voltage, current, binary inputs/outputs, analog inputs, and communication modules. The serial number 1906143C is visible on the label.

Figura 3: The ComAp AC03 InteliLite NT PRAMAC Generator Controller packaging, along with the included InteliLite NT AC-03 Operator Guide and small accessory parts.

3. Configurare și instalare

Proper installation is crucial for the reliable operation of the controller. It is recommended that installation be performed by qualified personnel.

3.1 Montare

• Securely mount the controller in a suitable control panel or enclosure.
• Asigurați o ventilație adecvată pentru a preveni supraîncălzirea.
• Protect the controller from direct sunlight, moisture, dust, and excessive vibrations.

3.2 Conexiuni de cablare

Refer to the detailed wiring diagrams in the included Operator Guide for specific connection points. General connections include:

• Alimentare electrică: Connect the controller to a stable DC power source (typically 8-36V DC).
• Intrări generator: Conectați vol. generatortage and current transformer (CT) inputs for accurate measurement.
• Intrări analogice: Wire up to 3 configurable analog inputs for sensors such as oil pressure, water temperature, or fuel level.
• Intrări binare: Connect 6 binary inputs for signals like emergency stop, low fuel, high temperature, or external alarms.
• Binary Outputs: Connect 6 binary outputs to control devices such as fuel solenoids, starter motors, or alarm indicators.
• Ridicare magnetică: Connect for engine speed sensing.
• D+ Pre-excitation: Wire the D+ terminal for alternator excitation control.
• Împământare: Ensure proper grounding of the controller and the generator set to prevent electrical interference and ensure safety.

3.3 Configurare inițială

After wiring, the controller may require initial configuration using ComAp PC software tools to set parameters specific to your generator set, such as engine type, sensor ranges, and protection limits. Consult the Operator Guide for detailed software setup instructions.

4. Instrucțiuni de utilizare

The ComAp AC03 controller features an intuitive front panel for easy operation.

4.1 Controale panoului frontal

• Afişa: The LCD screen shows operational data, alarms, and menu options.
• Butoane MODE: Used to navigate through different display screens and access menus.
• START Button (Green): Press to initiate the generator start sequence.
• Buton STOP (roșu): Press to stop the generator.
• FUEL PUMP Button: Manually operates the fuel pump for priming or testing.
• FAULT RESET Button: Resets active alarms after the fault condition has been cleared.
• Butonul PAGINĂ: Cycles through various information pages on the display, showing different sets of parameters.
• Butoane săgeată (Sus/Jos/Stânga/Dreapta): Used for navigation within menus and adjusting parameter values.

4.2 Pornirea generatorului

• Pornire manuală: Ensure all safety precautions are observed. Press the green ÎNCEPUT button. The controller will execute the pre-programmed start sequence.
• Remote Start (MRS): If configured for MRS, the generator will start automatically upon receiving a remote start signal or when pre-set conditions are met (e.g., mains failure).

4.3 Oprirea generatorului

Apăsați pe roșu STOP button. The controller will execute the pre-programmed stop sequence.

4.4 Operațiunea de monitorizare

Utilizați PAGINĂ şi MOD butoane pentru view various operational parameters on the display, including:

• Generator voltage și curent
• Frecvenţă
• Turația motorului (RPM)
• Presiunea uleiului
• Temperatura motorului
• Nivelul combustibilului
• Orele de funcționare

5. Întreținere

Regular maintenance ensures the longevity and reliable performance of your controller.

• curatenie: Keep the controller's front panel clean and free from dust and debris. Use a soft, dry cloth. Avoid abrasive cleaners, solvents, or excessive moisture.
• Conexiuni: Periodically inspect all wiring connections for tightness and signs of corrosion. Loose connections can lead to intermittent operation or faults.
• Actualizări firmware: Check the official ComAp website periodically for available firmware updates. Installing updates can provide new features, improvements, and bug fixes. Follow the manufacturer's instructions carefully for any update procedures.
• Verificare de mediu: Asigurați-vă că mediul de operare se încadrează în limitele specificate de temperatură și umiditate.

6. Depanare

This section provides general guidance for common issues. For detailed troubleshooting, refer to the comprehensive Operator Guide.

• Controlerul nu pornește:
  • Check the DC power supply connections and ensure the voltage este în intervalul specificat.
  • Verify that any external fuses or circuit breakers for the power supply are intact.
• Generatorul nu pornește:
  • Confirm adequate fuel level in the generator's tank.
  • Check the engine's starting battery voltage și conexiuni.
  • Asigurați-vă că butonul de oprire de urgență nu este acționat.
  • Look for any active alarms on the controller's display and address the underlying fault before attempting to start again. Press RESETARE DEFECT after clearing the fault.
• Active Alarms Displayed:
  • Note the specific alarm message or code on the display.
  • Consult the Operator Guide for detailed explanations of alarm codes and recommended corrective actions.
  • Once the fault condition is resolved, press the RESETARE DEFECT button to clear the alarm.
• Communication Issues (for remote monitoring):
  • Verify network cable connections (if applicable).
  • Check the configuration settings for the communication module (e.g., IP address, gateway).
  • Ensure the remote monitoring server or software is operational.

7. Specificații

8. Garanție și asistență

The ComAp AC03 InteliLite NT PRAMAC Generator Controller is covered by the manufacturer's standard warranty. For detailed warranty terms, technical support, or service inquiries, please refer to the documentation included with your product or visit the official ComAp website. Contact information and support resources can typically be found on the manufacturer's global website-ul sau prin distribuitori autorizați.