Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater User Manual

1. Introducere

This manual provides essential information for the safe and efficient operation of your Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater. This natural gas heater delivers 39,800 BTU/hour of direct heat, designed to warm outdoor living spaces effectively. Please read all instructions carefully before installation and use.

Figura 1: Față view of the Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater.

2. Informații importante privind siguranța

AVERTIZARE: Instalarea, reglarea, modificarea, service-ul sau întreținerea necorespunzătoare pot cauza vătămări sau daune materiale. Citiți cu atenție instrucțiunile de instalare, operare și întreținere înainte de a instala sau de a întreține acest echipament.

• Ensure proper ventilation when operating the heater.
• Nu depozitați și nu folosiți benzină sau alți vapori și lichide inflamabile în apropierea acestui aparat sau a oricărui alt aparat.
• Țineți copiii și animalele de companie departe de încălzitor în timpul funcționării.
• Maintain clear distances from combustible materials as specified in the installation section.
• Acest produs conține substanțe chimice cunoscute de Statul California ca fiind cancerigene și cauzând malformații congenitale sau alte probleme reproductive. (Avertisment conform Propoziției 65)

3. Caracteristicile produsului

• Sleek Contemporary Styling: Features brushed stainless steel and tinted ceramic glass for an aesthetic design.
• Radiant Infrared Burner: Heats up quickly, providing direct heat to warm individuals in the area.
• Rezistenta la vant: Designed to operate effectively in winds up to 12 miles per hour for consistent heating.
• Suport de montare reglabil: The wall bracket houses the control system away from heat and allows the heater head to pivot 25-degrees to the left and right of center for directional heat.
• Aplicație versatilă: Potrivit atât pentru instalații rezidențiale, cât și comerciale.
• Automatic Reignition: Provides continuous heat and convenience.
• Construcție durabilă: Made of stainless steel with a brushed finish.
• Sistem de aprindere electronică: Requires 120V for operation.

Figure 2: The sleek design of the Bromic Platinum 500 heater.

4. Instalare

Installation of the Bromic Smart-Heat Platinum 500 heater should be performed by a qualified and licensed professional in accordance with local codes and regulations.

4.1 Opțiuni de montare

The heater offers flexible mounting options:

• Montate pe perete: Utilize the provided mounting bracket. The bracket allows the heater to pivot 25 degrees left or right.
• Ceiling Suspended: Can be hung from the ceiling using an optional Ceiling Post Mount (not included).

The optimum mounting height is 8 feet from the floor to the bottom of the heater. If the distance above the heater is less than 42 inches, or if the heater will be exposed to elements, an accessory Heat Deflector must be used.

Figura 3: lateral view illustrating the mounting bracket and design.

4.2 Conexiuni la gaz și electricitate

• Connect to a natural gas supply. All gas connections must comply with local codes.
• The electronic ignition system requires a 120V electrical supply. Ensure proper grounding.

5. Instrucțiuni de utilizare

5.1 Pornirea încălzitorului

1. Asigurați-vă că supapa de alimentare cu gaz este deschisă.
2. Activate the electronic ignition system (requires 120V). The heater features automatic reignition.
3. Allow a few minutes for the radiant elements to reach full operating temperature.

5.2 Adjusting Heat Direction

The mounting bracket allows the heater head to pivot 25 degrees to the left or right. Carefully adjust the heater's angle to direct heat to your desired area. Ensure the heater is cool before making physical adjustments.

5.3 Oprirea încălzitorului

1. Deactivate the electronic ignition system.
2. Close the main gas supply valve if the heater will not be used for an extended period.

6. Întreținere

Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is completely cool and the gas supply is turned off before performing any maintenance.

• curatenie: Periodically clean the exterior surfaces with a soft, damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
• Sticla ceramica: The tinted ceramic glass should be inspected for cracks or damage. Clean gently if necessary.
• Verificarea arzatorului: Annually, have a qualified technician inspect the burner and gas connections for any blockages or wear.
• Heat Deflector: If an optional heat deflector is installed, ensure it is free from debris.

7. Depanare

If you encounter issues with your heater, refer to the following common troubleshooting steps. For complex problems, contact a qualified service technician.

7.1 Încălzitorul nu se aprinde

• Check if the natural gas supply valve is fully open.
• Verify that the 120V electrical supply for the electronic ignition is active.
• Ensure there are no obstructions around the burner.

7.2 Insufficient Heat Output

• Confirm the heater is positioned correctly to direct heat to the desired area.
• Check for strong winds exceeding 12 mph, which can reduce heating effectiveness.
• Ensure the area is within the recommended heating coverage of 200 square feet.

8. Specificații

Figure 4: Dimensional drawing of the heater.

9. Garanție și asistență

For warranty information and customer support, please refer to the documentation included with your product or visit the official Bromic Heating website-ul. Păstrați chitanța de achiziție pentru cererile de garanție.