Introducere
Mulțumesc pentru achizițieasing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp este conceput pentru a oferi ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
Informații de siguranță
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- Folosiți doar becuri de tipul și de apa specificatetage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- Acest lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Asigurați-vă că lamp este așezat pe o suprafață stabilă și plană pentru a preveni răsturnarea.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
Conținutul pachetului
Vă rugăm să verificați dacă toate componentele sunt prezente înainte de a începe asamblarea:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp prize)
- Hardware Pack (screws, washers, etc., if applicable)
- Cablu de alimentare
Configurare și asamblare
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Despachetați componente: Scoateți cu grijă toate piesele din ambalaj și așezați-le pe o suprafață curată și moale pentru a preveni zgârieturile.
- Asamblați stâlpii: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- Atașați baza: Securely attach the assembled poles to the brushed steel lamp baza.
- Instalați rafturi: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- Atașați Lamp Prize: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp priză.
- Introduceți becuri: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp prize. Nu strângeți prea tare.
- Poziția Lamp: Așezați lamp in its desired location, ensuring the power cord is not pinched or obstructed.
Figura 2: Detaliu al l-uluiamp's base and shades.
Instrucțiuni de operare
- Conexiune de alimentare: Conectați lamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- Pornire/Oprire: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
Întreţinere
- curatenie: Pentru a curăța lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- Înlocuire bec: Deconectați întotdeauna priza lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lamp nu pornește. | 1. Lamp neconectat. 2. Becul este slăbit sau ars. 3. Priza de alimentare nu funcționează. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| Lumina pâlpâie. | 1. Bec slăbit. 2. Tip/putere incorectă a beculuitage. 3. Bec defect. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp este instabil. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. Mutați lamp pe o suprafață plană și stabilă. 2. Re-tighten all pole connections. |
Specificații
- Număr de model: 4305-22
- Dimensiuni (D x L x H): 11.7" D x 14" L x 68" H
- Greutatea articolului: 15.2 lire sterline
- Tip material: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- Culoare nuanță: Alb
- Număr de surse de lumină: 3
- Baza becului: E26 Mediu
- Wattage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- Tip comutator: Pull Chain (3 individual switches)
- Sursa de alimentare: Electric cu fir
- Lungimea cablului: Aproximativ 5 picioare (60 inci)
- Tip de instalare: Freestanding
- Utilizare în interior/exterior: Doar în interior
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
Informații despre garanție
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
Asistență pentru clienți
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso website pentru resurse de asistență.
Adesso Official Website: www.adessohome.com