Arrow Fastener GT31LI

Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun Instruction Manual

Model: GT31LI | Brand: Arrow Fastener

1.view

The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun is designed for a variety of crafting, DIY, and repair projects. Featuring a lithium-ion battery, it provides up to 100 minutes of continuous use on a single charge. The glue gun heats up rapidly, typically within one minute, allowing for quick project starts. Its compact and lightweight design ensures ease of handling and portability.

Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun

Figure 1: The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun, showcasing designul său compact și schema de culori roșu/negru.

2. Instrucțiuni de siguranță

  • Hot Nozzle: Duza și lipiciul topit devin foarte fierbinți. Evitați contactul direct cu pielea pentru a preveni arsurile.
  • Ventilare: Use the glue gun in a well-ventilated area.
  • Depozitare: Always place the glue gun on its integrated stand when not in use to prevent melted glue from dripping onto surfaces. Store in a cool, dry place away from children.
  • Oprire automată: The glue gun features an automatic shut-off after five minutes of inactivity to enhance safety and conserve battery life.
  • Încărcare: Charge the device only with a 5V output adapter using the provided USB cable. Using an incorrect adapter may cause charging failure.
  • Glue Sticks: Use only 5/16-inch diameter mini glue sticks. Incorrect sizes may cause feeding issues or damage to the gun.
  • Copii: Keep out of reach of children. Adult supervision is required if children are using the tool.

3. Componente incluse

  • Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun
  • Lithium-Ion Battery (integrated)
  • Cablu de încărcare USB
  • Mini Glue Sticks (quantity may vary, typically 24 included)

4. Configurare

  1. Taxă inițială: Before first use, fully charge the glue gun's integrated lithium-ion battery using the provided USB charging cable and a compatible 5V output adapter. The charging indicator light will show charging status.
  2. Introduceți lipiciul: Insert a 5/16-inch diameter mini glue stick into the loading chamber at the rear of the glue gun. Push it gently until it stops.

5. Instrucțiuni de utilizare

  1. Pornire: Press and hold the power button (usually located near the handle) for a few seconds until the indicator light illuminates.
  2. Încălzire: The glue gun will begin to heat up. The indicator light may change color or blink to show it's heating. It typically reaches operating temperature within one minute.
  3. Aplicarea adezivului: Once the glue gun is heated and the indicator light signals readiness (e.g., solid green), gently squeeze the trigger to dispense melted glue. Apply glue to the desired surface.
  4. Oprire automată: If the glue gun is left idle for approximately five minutes, it will automatically power off to prevent overheating and save battery. To resume operation, simply press the power button again.
  5. Oprire: To manually turn off the glue gun, press and hold the power button until the indicator light turns off.

6. Întreținere

  • curatenie: Ensure the glue gun is completely cool before cleaning. Gently wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the gun in water.
  • Îngrijirea duzei: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can usually be carefully removed once the gun is cool.
  • Depozitare: Store the glue gun in a clean, dry place. Ensure no glue stick is left partially melted in the chamber during long-term storage.

7. Depanare

ProblemăCauza posibilaSoluţie
Pistolul de lipit nu se încălzește.Bateria este descărcată sau descărcată.Charge the battery fully using the provided USB cable and a 5V adapter.
Glue is not dispensing.Glue stick is not fully inserted or is the wrong size.Ensure a 5/16-inch glue stick is fully inserted. Allow adequate heating time.
Glue gun shuts off unexpectedly.Auto shut-off feature activated due to inactivity.Press the power button to turn it back on.

8. Specificații

  • Model: GT31LI
  • Marca: Închizător cu săgeată
  • Wattage: 30 wați
  • Baterie: 1 litiu ion (inclus)
  • Durata de viață a bateriei: Până la 100 de minute la o singură încărcare
  • Timp de încălzire: 1 minut sau mai puțin
  • Diametru baton de lipici: 5/16-inch
  • Culoare: Roşu
  • Material: Plastic
  • Greutatea articolului: 11.6 uncii
  • Materiale compatibile: Cardboard, Cotton, Fabric, Leather, Plastic
  • Componente incluse: Glue gun, USB charging cable

9. Garanție și asistență

For warranty information or technical support, please refer to the documentation included with your product or visit the official Arrow Fastener website-ul. Păstrați chitanța de achiziție pentru cererile de garanție.

© 2026 Arrow Fastener. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.